Publikationen
Zeitschriften
2023
- ArticleHeat-pattern induced non-uniform radial microstructure and properties of Ti-6Al-4V joint prepared by rotary friction weldingJin, F.; Rao, H.; Wang, Q.; Wen, G.; Liu, P.; Liu, J.; Shen, J.; Li, J.; Xiong, J.; Ma, N. (2023)
In: Materials Characterization, Vol. 195, 112536. 
ArticleUnraveling the role of shell thickness and pore size on the mechanical properties of ceramic-based macroporous structuresGomez-Gomez, A.; Winhard, B.; Lilleodden, E.; Huber, N.; Furlan, K.P. (2023)
In: Journal of the American Ceramic Society, Vol. 106, 2, 1273 - 1286.- ArticleMechanistic origin of the enhanced strength and ductility in Mg-rare earth alloysOvri, H.; Markmann, J.; Barthel, J.; Kruth, M.; Dieringa, H.; Lilleodden, E. (2023)
In: Acta Materialia, Vol. 244, 118550.
Zur Publikation beim Verlag 2022
- ArticleHow nanoporous silicon-polypyrrole hybrids flex their muscles in aqueous electrolytes: In operando high-resolution x-ray diffraction and electron tomography-based micromechanical computer simulationsBrinker, M.; Thelen, M.; May, M.; Rings, D.; Krekeler, T.; Lakner, P.; Keller, T.; Bertram, F.; Huber, N.; Huber, P. (2022)
In: Physical Review Materials, Vol. 6, 11, 116002. - ArticleCombined experimental-numerical analysis of the temperature evolution and distribution during friction surfacingKallien, Z.; Klusemann, B. (2022)
In: Surface and Coatings Technology, Vol. 437, 128350. - ArticleFundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturingSoujon, M.; Kallien, Z.; Roos, A.; Zeller-Plumhoff, B.; Klusemann, B. (2022)
In: Materials & Design, Vol. 219, 110786. - ArticleMulti-adaptive coupling of finite element meshes with peridynamic grids: robust implementation and potential applicationsMossaiby, F.; Sheikhbahaei, P.; Shojaei, A. (2022)
In: Engineering with Computers, - ArticleFatigue peculiarity of metals treated by laser shock impactProkhorov, A.; Vshivkov, A.; Plekhov, O.; Kashaev, N. (2022)
In: Procedia Structural Integrity , Vol. 37, 540 - 546. - ArticleEffect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheetsSala, S.; Keller, S.; Chupakhin, S.; Pöltl, D.; Klusemann, B.; Kashaev, N. (2022)
In: Journal of Materials Processing Technology, Vol. 305, 117578. - ArticlePromoting Effect of the Residual Silver on the Electrocatalytic Oxidation of Methanol and Its Intermediates on Nanoporous GoldSilva Olaya, A.R.; Kühling, F.; Mahr, C.; Zandersons, B.; Rosenauer, A.; Weissmüller, J.; Wittstock, G. (2022)
In: ACS Catalysis, Vol. 12, 8, 4415 - 4429. - ArticleOn the analysis of plasticity induced crack closure in welded specimens: A mechanism controlled by the stress intensity factor resulting from residual stressesWang, Q.; Huber, N.; Liu, X.; Kashaev, N. (2022)
In: International Journal of Fatigue, Vol. 162, 106940. - ArticleMitigating the susceptibility to intergranular corrosion of alloy 625 by friction-stir weldingLemos, G.V.B.; Farina, A.B.; Piaggio, H.; Bergmann, L.; Ferreira, J.Z.; dos Santos, J.F.; Vander Voort, G.; Reguly, A. (2022)
In: Scientific Reports, Vol. 12, 1, 3482. - ArticleTailoring powder strengths for enhanced quality of cold sprayed Al6061 depositsHuang, C.; List, A.; Shen, J.; Fu, B.; Yin, S.; Chen, T.; Klusemann, B.; Gärtner, F.; Klassen, T. (2022)
In: Materials & Design, Vol. 215, 110494. - ArticleGiant compliance and spontaneous buckling of beams containing mobile solute atomsWeissmüller, J.; Shi, S. (2022)
In: Acta Materialia, Vol. 227, 117696. - ArticleCoaxial laser directed energy deposition with wire of thin-walled duplex stainless steel parts: Process discontinuities and their impact on the mechanical propertiesOdermatt, A.; Dorn, F.; Ventzke, V.; Kashaev, N. (2022)
In: CIRP Journal of Manufacturing Science and Technology, Vol. 37, 443 - 453. - ArticleAn effective activation method for industrially produced TiFeMn powder for hydrogen storageDreistadt, D.; Le, T.; Capurso, G.; Bellosta von Colbe, J.; Santhosh, A.; Pistidda, C.; Scharnagl, N.; Ovri, H.; Milanese, C.; Jerabek, P.; Klassen, T.; Jepsen, J. (2022)
In: Journal of Alloys and Compounds, Vol. 919, 165847. - ArticleCoupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress PredictionPozdnyakov, V.; Keller, S.; Kashaev, N.; Klusemann, B.; Oberrath, J. (2022)
In: Metals, Vol. 12, 1, 107. - ArticleOn the relationship between microstructure and residual stress in laser-shock-peened Ti-6Al-4VMironov, S.; Ozerov, M.; Kalinenko, A.; Stepanov, N.; Plekhov, O.; Sikhamov, R.; Ventzke, V.; Kashaev, N.; Salishchev, G.; Semiatin, L.; Zherebtsov, S. (2022)
In: Journal of Alloys and Compounds, Vol. 900, 163383. - ArticleEffect of pre-heating and post-weld heat treatment on structure and mechanical properties of laser beam-welded Ti2AlNb-based jointsPanov, D.; Naumov, S.; Stepanov, N.; Sokolovsky, V.; Volokitina, E.; Kashaev, N.; Ventzke, V.; Dinse, R.; Riekehr, S.; Povolyaeva, E.; Nochovnaya, N.; Alekseev, E.; Zherebtsov, S.; Salishchev, G. (2022)
In: Intermetallics, Vol. 143, 107466. - ArticleEffect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloyWang, H.; Keller, S.; Chang, Y.; Kashaev, N.; Yan, K.; Gurevich, E.L.; Ostendorf, A. (2022)
In: Journal of Alloys and Compounds, Vol. 896, 163011. - ArticleThe effect of carboxylate compounds on Volta potential and corrosion inhibition of Mg containing different levels of ironYasakau, K.; Maltseva, A.; Lamaka, S.; Mei, D.; Ovri, H.; Volovitch, P.; Ferreira, M.; Zheludkevich, M. (2022)
In: Corrosion Science, Vol. 194, 109937. - ArticleThe effect of prior adhesive bonding on the corrosion behavior of AA2024 FSWed single lap jointsCharalampidou, C.; Braga, D.; Bergmann, L.; Kourkoulis, S.; da Silva, L.; Infante, V.; dos Santos, J.; Moreira, P.; Alexopoulos, N. (2022)
In: Mechanics of Materials, Vol. 164, 104122. - ArticleEvolution of length scales and of chemical heterogeneity during primary and secondary dealloyingLi, Y.; Dinh-Ngo, B.; Markmann, J.; Weissmüller, J. (2022)
In: Acta Materialia, Vol. 222, 117424. - ArticleExperimental and numerical investigation of laser beam-welded Al–Cu–Li joints using micro-mechanical characteristicsExamilioti, T.; Papanikos, P.; Kashaev, N.; Klusemann, B.; Alexopoulos, N. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 19, 2431 - 2446. - ArticleChanges in processing characteristics and microstructural evolution during friction extrusion of aluminumHalak, R.; Rath, L.; Suhuddin, U.; dos Santos, J.; Klusemann, B. (2022)
In: International Journal of Material Forming, Vol. 15, 3, 24. - ArticleA multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloyWang, J.; Fu, B.; Shen, J.; Bergmann, L.; Lu, X.; dos Santos, J.; Klusemann, B. (2022)
In: Journal of Materials Processing Technology, Vol. 307, 117679. - ArticleWire-based laser directed energy deposition of AA7075: effect of process parameters on microstructure and mechanical propertiesWang, M.; Ventzke, V.; Kashaev, N. (2022)
In: Journal of Materials Research and Technology, Vol. 21, 388 - 403. - ArticleElectrochemical Behavior of Nanoporous Gold/Polypyrrole Supercapacitor under DeformationLi, J.; Li, L.-Y.; Jia, P.; Okulov, I.V. (2022)
In: Nanomaterials, Vol. 12, 13, 2149. - ArticlePrecipitation Evolution in the Heat-Affected Zone and Coating Material of AA2024 Processed by Friction SurfacingEhrich, J.; Staron, P.; Karkar, A.; Roos, A.; Hanke, S. (2022)
In: Advanced Engineering Materials, Vol. 24, 11, 2201019. - ArticleEffect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steelBergmann, L.; Batistão, B.; de Alcantara, N.; Gargarella, P.; Klusemann, B. (2022)
In: Welding in the World, Vol. 66, 9, 1747 - 1756. - ArticleComparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequencesSu, Y.; Li, W.; Shen, J.; Bergmann, L.; dos Santos, J.F.; Klusemann, B.; Vairis, A. (2022)
In: Materials Science and Engineering: A, Vol. 859, 144227. - ArticleInfluence of laser shock peening on low- and high-cycle fatigue of an OT4-0 titanium alloyGachegova, E.A.; Sikhamov, R.; Ventzke, V.; Kashaev, N.; Plekhov, O.A. (2022)
In: Journal of Applied Mechanics and Technical Physics , Vol. 63, 2, 335 - 342. - ArticleDataset from healthy and defective spot welds in refill friction stir spot welding using acoustic emissionDahmene, F.; Yaacoubi, S.; El Mountassir, M.; Porot, G.; Masmoudi, M.; Nennig, P.; Suhuddin, U.; dos Santos, J. (2022)
In: Data in Brief, Vol. 45, 108750. - ArticleStrengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed FusionTaghipour, A.; Mazaheri, Y.; McDavid, J.; Sheikhi, S.; Braun, M.; Shen, J.; Klusemann, B.; Ehlers, S. (2022)
In: Advanced Engineering Materials, 2201230. - ArticleEffects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot WeldingFerrari, V.R.; Coury, F.G.; Suhuddin, U.F.H.; Alcântara, N.G.; dos Santos, J.F.; Ohashi, R.; Fujimoto, M.; Koga, G.Y. (2022)
In: Journal of Manufacturing Processes, Vol. 84, 298 - 315. - ArticleInfluence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental–numerical studySandmann, P.; Keller, S.; Kashaev, N.; Ghouse, S.; Hooper, P.; Klusemann, B.; Davies, C. (2022)
In: Additive Manufacturing, Vol. 60, 103204. - ArticlePhase decomposition in nanoporous Au-PtLiu, M.; Weissmüller, J. (2022)
In: Acta Materialia, Vol. 241, 118419. - ArticleA modeling approach to predict the mechanical response of materials to irradiation damage from external sources: Nanoindentation of Pb-implanted ZrSiO4Huber, N.; Beirau, T. (2022)
In: Materialia, Vol. 24, 101506. - ArticleInvestigation of process window for AA7075 considering effects of different wire feed directions in lateral Laser Metal DepositionWang, M.; Kashaev, N. (2022)
In: Procedia CIRP, Vol. 111, 218 - 223. - ArticleHeterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloyEscobar, J.; Gwalni, B.; Olszta, M.; Silverstein, J.; Ajantiwalay, T.; Overman, N.; Fu, W.; Li, Y.; Bergmann, L.; Maawad, E.; Klusemann, B.; dos Santos, J.; Devaraj, A. (2022)
In: Journal of Alloys and Compounds, Vol. 928, 167007. - ArticleFatigue behaviour of laser shock peened AISI D2 tool steelAzevedo, L.; Kashaev, N.; Horstmann, C.; Ventzke, V.; Furtado, C.; Moreira, P.; Tavares, P. (2022)
In: International Journal of Fatigue, Vol. 165, 107226. - ArticleSelf-Detachment and Subsurface Densification of Dealloyed Nanoporous Thin FilmsHenkelmann, G.; Waldow, D.; Liu, M.; Lührs, L.; Li, Y.; Weissmüller, J. (2022)
In: Nano Letters, Vol. 22, 16, 6787 - 6793. - ArticleNumerical investigation of dissimilar friction stir welding of AISI 304L and 410S stainless steelsCruz da Silva, Y.; Caminha Andrade, T.; Vieira de Oliveira Júnior, F.; dos Santos, J.; Marcondes, F.; Miranda, H.; Silva, C. (2022)
In: The International Journal of Advanced Manufacturing Technology, Vol. 121, 3-4, 2721 - 2733. - ArticleEnhanced electrochemical actuation of nanoporous gold-polypyrrole hybrid under loadLi, J.; Markmann, J.; Mameka, N. (2022)
In: Applied Physics Letters, Vol. 121, 2, 021901. - ArticleModeling of temperature- and strain-driven intermetallic compound evolution in an Al–Mg system via a multiphase-field approach with application to refill friction stir spot weldingRaza, S.; Mittnacht, T.; Diyoke, G.; Schneider, D.; Nestler, B.; Klusemann, B. (2022)
In: Journal of the Mechanics and Physics of Solids, Vol. 169, 105059. - ArticleEffect of Welding Speed on Friction Stir Welds of PM2000 AlloyWang, J.; Fu, B.; Bergmann, L.; Liu, F.; Klusemann, B. (2022)
In: Journal of Materials Engineering and Performance, - ArticleTool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheetsde Castro, C.; Shen, J.; Plaine, A.; Suhuddin, U.; de Alcantara, N.; dos Santos, J.; Klusemann, B. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 20, 857 - 866.
Zur Publikation2021
- ArticleTube Drawing with Tilted Die: Texture, Dislocation Density and Mechanical PropertiesAl-Hamdany, N.; Salih, M.; Palkowski, H.; Carradò, A.; Gan, W.; Schell, N.; Brokmeier, H. (2021)
In: Metals, Vol. 11, 4, 638. - ArticleLaser Beam Welding of a Ti-15Mo/TiB Metal–Matrix CompositeOzerov, M.; Povolyaeva, E.; Stepanov, N.; Ventzke, V.; Dinse, R.; Kashaev, N.; Zherebtsov, S. (2021)
In: Metals, Vol. 11, 3, 506. - ArticleExploring Structural Changes, Manufacturing, Joining, and Repair of Intermetallic γ-TiAl-Based Alloys: Recent Progress Enabled by In Situ Synchrotron X-Ray TechniquesSpoerk-Erdely, P.; Staron, P.; Liu, J.; Kashaev, N.; Stark, A.; Hauschildt, K.; Maawad, E.; Mayer, S.; Clemens, H. (2021)
In: Advanced Engineering Materials, Vol. 23, 11, 2000947. - ArticleTailoring of residual stresses by specific use of defined prestress during laser shock peeningSchwab, K.; Keller, S.; Kashaev, N.; Klusemann, B. (2021)
In: Journal of Materials Processing Technology, Vol. 295, 117154. - ArticlePhase-field modelling for fatigue crack growth under laser shock peening-induced residual stressesSeiler, M.; Keller, S.; Kashaev, N.; Klusemann, B.; Kästner, M. (2021)
In: Archive of Applied Mechanics, Vol. 91, 8, 3709 - 3723. - ArticleFriction-based processes for hybrid multi-material joiningLambiase, F.; Balle, F.; Blaga, L.; Liu, F.; Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 266, 113828. - ArticleA Strategy for Dimensionality Reduction and Data Analysis Applied to Microstructure–Property Relationships of Nanoporous MetalsHuber, N. (2021)
In: Materials, Vol. 14, 8, 1822. - ArticleHybrid Modelling by Machine Learning Corrections of Analytical Model Predictions towards High-Fidelity Simulation SolutionsBock, F.; Keller, S.; Huber, N.; Klusemann, B. (2021)
In: Materials, Vol. 14, 8, 1883. - ArticleRecent trends on studies of nanostructured metals Zhang, X.; Lilleodden, E.; Wang, J. (2021)
In: MRS Bulletin, Vol. 46, 3, 217 - 224. - ArticleScaling behavior of stiffness and strength of hierarchical network nanomaterialsShi, S.; Li, Y.; Ngo-Dinh, B.; Markmann, J.; Weissmüller, J. (2021)
In: Science, Vol. 371, 6533, 1026 - 1033. - ArticleCompression Behaviour of Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.; Ventzke, V.; Neto, L.; Riekehr, S.; Martina, F.; Kashaev, N.; Hönnige, J.; Williams, S.; Klusemann, B. (2021)
In: Metals, Vol. 11, 6, 877. - ArticleProbing underlying mechanisms for pcBN tool decay during friction stir welding of nickel-based alloysVicharapu, B.; Lemos, G.; Bergmann, L.; dos Santos, J.; De, A.; Clarke, T. (2021)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 18, e2455. - ArticleInvestigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel®625Landell, R.; de Lima Lessa, C.; Bergmann, L.; dos Santos, J.; Kwietniewski, C.; Klusemann, B. (2021)
In: Welding in the World, Vol. 65, 393 - 403. - ArticleExperimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloysBock, F.; Herrnring, J.; Froend, M.; Enz, J.; Kashaev, N.; Klusemann, B. (2021)
In: Journal of Manufacturing Processes, Vol. 64, 982 - 995. - ArticleDamage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challengesZerbst, U.; Bruno, G.; Buffiere, Y.; Wegener, T.; Wu, T.; Zhang, X.; Kashaev, N.; Meneghetti, G.; Hrabe, N.; Madia, M.; Werner, T.; Hilgenberg, K.; Koukolíková, M.; Procházka, R.; Džugan, J.; Möller, B.; Beretta, S.; Evans, A.; Wagener, R.; Schnabel, K. (2021)
In: Progress in Materials Science, Vol. 121, 100786. - ArticleModelling the effect of intrinsic radiation damage on mechanical properties: The crystalline-to-amorphous transition in zirconHuber, N.; Beirau, T. (2021)
In: Scripta Materialia, Vol. 197, 113789. - ArticleCrystal Plasticity Modeling of Creep in Alloys with Lamellar Microstructures at the Example of Fully Lamellar TiAlSchnabel, J.; Scheider, I. (2021)
In: Frontiers in Materials, Vol. 7, 581187. - ArticleEffect of laser heating on mechanical properties, residual stresses and retardation of fatigue crack growth in AA2024Kashaev, N.; Groth, A.; Ventzke, V.; Horstmann, M.; Riekehr, S.; Staron, P.; Huber, N. (2021)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 44, 4, 887 - 900. - ArticleConstitutive artificial neural networks: A fast and general approach to predictive data-driven constitutive modeling by deep learningLinka, K.; Hillgärtner, M.; Abdolazizi, K.; Aydin, R.; Itskov, M.; Cyron, C. (2021)
In: Journal of Computational Physics, Vol. 429, 110010. - ArticleApplication of stress intensity factor superposition in residual stress fields considering crack closureKeller, S.; Klusemann, B. (2021)
In: Engineering Fracture Mechanics, Vol. 243, 107415. - ArticleExperimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloySun, R.; Keller, S.; Zhu, Y.; Guo, W.; Kashaev, N.; Klusemann, B. (2021)
In: International Journal of Fatigue, Vol. 145, 106081. - ArticleRecent progress on control strategies for inherent issues in friction stir weldingMeng, X.; Huang, Y.; Cao, J.; Shen, J.; Dos Santos, J. (2021)
In: Progress in Materials Science, Vol. 115, 100706. - ArticleUnloading behaviors of the rare-earth magnesium alloy ZE10 sheetTang, W.; Lee, J.; Wang, H.; Steglich, D.; Li, D.; Peng, Y.; Wu, P. (2021)
In: Journal of Magnesium and Alloys, Vol. 9, 3, 927 - 936. - ArticleHydrothermal aging of friction riveted thermoplastic composite joints for aircraft applicationsBorba, N.; dos Santos, J.; Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 255, 112871. - ArticleInfluence of LDH conversion coatings on the adhesion and corrosion protection of friction spot-joined AA2024-T3/CF-PPSBouali, A.; André, N.; Silva Campos, M.; Serdechnova, M.; Dos Santos, J.; Amancio-Filho, S.; Zheludkevich, M. (2021)
In: Journal of Materials Processing Technology, Vol. 67, 197 - 210. - ArticleModeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid techniqueHerrnring, J.; Sundman, B.; Staron, P.; Klusemann, B. (2021)
In: Acta Materialia, Vol. 215, 117053. - ArticleNanoporous gold-polypyrrole hybrid electrochemical actuators with tunable elasticityLi, J.; Markmann, J.; Weissmüller, J.; Mameka, N. (2021)
In: Acta Materialia, Vol. 212, 116852. - ArticleRevealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steelFu, B.; Shen, J.; Suhuddin, U.; Pereira, A.; Maawad, E.; dos Santos, J.; Klusemann, B.; Rethmeier, M. (2021)
In: Materials & Design, Vol. 209, 109997. - ArticleMultimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloyEscobar, J.; Gwalani, B.; Olszta, M.; Silverstein, J.; Overman, N.; Bergmann, L.; dos Santos, J.F.; Staron, P.; Maawad, E.; Klusemann, B.; Mathaudhu, S.; Devaraj, A. (2021)
In: Journal of Alloys and Compounds, Vol. 887, 161351. - ArticleProcess Transferability of Friction Riveting of AA2024-T351/Polyetherimide (PEI) Joints Using Hand-Driven, Low-Cost Drilling EquipmentFeier, A.; Becheru, A.; Brîndușoiu, M.; Blaga, L. (2021)
In: Processes, Vol. 9, 8, 1376. - ArticleOn the prediction of fatigue crack growth based on weight functions in residual stress fields induced by laser shock peening and laser heatingKashaev, N.; Keller, S.; Staron, P.; Maawad, E.; Huber, N. (2021)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 44, 12, 3463 - 3481. - ArticleEffect of laser beam welding on microstructure, tensile strength and fatigue behaviour of duplex stainless steel 2205Odermatt, A.; Ventzke, V.; Dorn, F.; Dinsé, R.; Merhof, P.; Kashaev, N. (2021)
In: Journal of Manufacturing Processes, Vol. 72, 148 - 158. - ArticleInfluence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing depositsEhrich, J.; Roos, A.; Klusemann, B.; Hanke, S. (2021)
In: Materials Science and Engineering: A, Vol. 819, 141407. - ArticleThe Effect of LSP on the Structure Evolution and Self-Heating of ARMCO Iron under Cyclic LoadingProkhorov, A.; Vshivkov, A.; Plekhov, O.; Kashaev, N.; Fomin, F.; Ozerov, M.; Zherebtsov, S. (2021)
In: Metals, Vol. 11, 8, 1198. - ArticleEffect of the Gap Width in AZ31 Magnesium Alloy Joints Obtained by Friction Stir WeldingChiuzuli, F.; Batistão, B.; Bergmann, L.; Alcantara, N.; dos Santos, J.; Klusemann, B.; Gargarella, P. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 15, 5297 - 5306. - ArticleImage segmentation and analysis for densification mapping of nanoporous gold after nanoindentationRichert, C.; Wu, Y.; Hablitzel, M.; Lilleodden, E.; Huber, N. (2021)
In: MRS Advances , Vol. 6, 20, 519 - 523. - ArticleGrain Boundary Formation Through Particle Detachment During Coarsening of Nanoporous MetalsElder, K.L.M.; Beck Andrews, W.; Ziehmer, M.; Mameka, N.; Kirchlechner, C.; Davydok, A.; Micha, J.-S.; Chadwick, A.F.; Lilleodden, E.T.; Thornton, K.; Voorhees, P.W. (2021)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 118, 30, e2104132118. - ArticleAssessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy JointsWen, Q.; Li, W.; Patel, V.; Bergmann, L.; Klusemann, B.; dos Santos, J. (2021)
In: Acta Metallurgica Sinica (English Letters), Vol. 34, 125 - 134. - ArticleComparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-jointsSu, Y.; Li, W.; Shen, J.; Fu, B.; dos Santos, J.; Klusemann, B.; Vairis, A. (2021)
In: Materials Science and Engineering: A, Vol. 823, 141698. - ArticleMicrostructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery applicationGera, D.; Fu, B.; Suhuddin, U.; Plaine, A.; Alcantara, N.; dos Santos, J.; Klusemann, B. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 13, 2272 - 2286. - ArticleImproved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot weldingFu, B.; Shen, J.; Suhuddin, U.; Chen, T.; dos Santos, J.; Klusemann, B.; Rethmeier, M. (2021)
In: Scripta Materialia, Vol. 203, 114113. - ArticleExperimental and Numerical Analysis of Refill Friction Stir Spot Welding of Thin AA7075-T6 SheetsJanga, V.S.R.; Awang, M.; Yamin, M.F.; Suhuddin, U.F.H.; Klusemann, B.; Dos Santos, J.F. (2021)
In: Materials, Vol. 14, 23, 7485. - ArticleEffect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198Examilioti, T.; Kashaev, N.; Ventzke, V.; Klusemann, B.; Alexopoulos, N. (2021)
In: Materials Characterization, Vol. 178, 111257. - ArticleOn factors defining the mechanical behavior of nanoporous goldZandersons, B.; Lührs, L.; Li, Y.; Weissmüller, J. (2021)
In: Acta Materialia, Vol. 215, 116979. - ArticleIn situ observation of competitive growth of α grains during β → α transformation in laser beam manufactured TiAl alloysLiu, J.; Wu, T.; Wang, M.; Wang, L.; Zhou, Q.; Wang, K.; Staron, P.; Schell, N.; Huber, N.; Kashaev, N. (2021)
In: Materials Characterization, Vol. 179, 111371. - ArticlePercolation transitions in pyrochlore: Radiation-damage and thermally induced structural reorganizationBeirau, T.; Huber, N. (2021)
In: Applied Physics Letters, Vol. 119, 13, 131905.
2020
- ArticleOn the stability of the passive Ti-6Al-4V film of friction stir welds with stainless steel: Effect of not native metal speciesSilva, D.; Campanelli, L.; Bergmann, L.; dos santos, J.; Hammer, P.; Della Rovere, C.; Aquino, J. (2020)
In: Electrochimica Acta, Vol. 358, 136900. - ArticleDurability of Metal-Composite Friction Spot Joints under Environmental Conditions Goushegir, S.; Scharnagl, N.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1144. - ArticleMultiphase-field modeling of temperature-driven intermetallic compound evolution in an Al–Mg system for application to solid-state joining processesRaza, S.; Klusemann, B. (2020)
In: Modelling and Simulation in Materials Science Engineering, Vol. 28, 8, 085003. - ArticleSimultaneously enhancing mechanical properties and electrical conductivity of aluminum by using graphene as the reinforcementZhang, S.; Chen, G.; Qu, T.; Fang, G.; Bai, S.; Yan, Y.; Zhang, G.; Zhou, Z.; Shen, J.; Yao, D.; Zhang, Y.; Shi, Q. (2020)
In: Materials Letters, Vol. 265, 127440. - ArticleDatasets for the microstructure of nanoscale metal network structures and for its evolution during coarseningLi, Y.; Dinh-Ngô, B.; Markmann, J.; Weissmüller, J. (2020)
In: Data in Brief, Vol. 29, 105030. - ArticleExperimentally established correlation of friction surfacing process temperature and deposit geometryKallien, Z.; Rath, L.; Roos, A.; Klusemann, B. (2020)
In: Surface and Coatings Technology, Vol. 397, 126040. - ArticleThermally Driven Ag–Au Compositional Changes at the Ligament Surface in Nanoporous Gold: Implications for Electrocatalytic ApplicationsHaensch, M.; Graf, M.; Wang, W.; Nefedov, A.; Wöll, C.; Weissmüller, J.; Wittstock, G. (2020)
In: ACS Applied Nano Materials, Vol. 3, 3, 2197 - 2206. - ArticleTailoring grain refinement through thickness in magnesium alloy via stationary shoulder friction stir processing and copper backing platePatel, V.; Li, W.; Liu, X.; Wen, Q.; Su, Y.; Shen, J.; Fu, B. (2020)
In: Materials Science and Engineering A, Vol. 784, 139322. - ArticleOn the influence of laser beam welding parameters for autogenous AA2198 welded jointsExamilioti, T.; Kashaev, N.; Enz, J.; Klusemann, B.; Alexopoulos, N. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 110, 2079 - 2092. - ArticleSelective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2Zhou, S.; Su, Y.; Wang, H.; Enz, J.; Ebel, T.; Yan, M.; (2020)
In: Additive Manufacturing, Vol. 36, 101458. - ArticleSensitivity Studies for a Hybrid Numerical–Statistical Short-Term Wind and Gust Forecast at Three Locations in the Basque Country (Spain)Carreno-Madinabeitia, S.; Ibarra-Berastegi, G.; Sáenz, J.; Zorita, E.; Ulazia, A. (2020)
In: Atmosphere, Vol. 11, 1, 45. - ArticleMixed-Mode Deformation and Failure of a Magnesium Sheet Quantified using a Modified Arcan FixtureSteglich, D. (2020)
In: Experimental Mechanics, Vol. 60, 109 - 118. - ArticleSingle-shot femtosecond laser processing of Al-alloy surface: An interplay between Mbar shock waves, enhanced microhardness, residual stresses, and chemical modificationAgeev, E.; Andreeva, Y.; Ionin, A.; Kashaev, N.; Kudryashov, S.; Nikonorov, N.; Nuryev, R.; Petrov, A.; Rudenko, A.; Samokhvalov, A.; Saraeva, I.; Veiko, V. (2020)
In: Optics and Laser Technology, Vol. 126, 106131. - ArticleThe accuracy of laser flash analysis explored by finite element method and numerical fittingPhilipp, A.; Eichinger, J.F.; Aydin, R.C.; Georgiadis, A.; Cyron, C.J.; Retsch, M. (2020)
In: Heat and Mass Transfer, Vol. 56, 811 - 823. - ArticleOn the application of laser shock peening for retardation of surface fatigue cracks in laser beam‐welded AA6056Kashaev, N.; Ushmaev, D.; Ventzke, V.; Klusemann, B.; Fomin, F. (2020)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, 7, 1500 - 1513. - ArticleDetwinning-mediated hardening in Mg: A microcompression study of a single twin boundaryMaghsoudi, M.; Ziehmer, M.; Lilleodden, E. (2020)
In: Materials Science and Engineering A, Vol. 772, 138747. - ArticleLocal Dirichlet-type absorbing boundary conditions for transient elastic wave propagation problemsMossaiby, F.; Shojaei, A.; Boroomand, B.; Zaccariotto, M.; Galvanetto, U. (2020)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 362, 112856. - ArticleDiffusion-driven microstructure evolution in OpenCalphadHerrnring, J.; Sundman, B.; Klusemann, B. (2020)
In: Computational Materials Science, Vol. 175, 109236. - ArticleLow-velocity impact response of friction riveted joints for aircraft application Borba, N.Z.; Körbelin, J.; Fiedler, B.; dos Santos, J.F.; Amancio-Filho, S.T. (2020)
In: Materials and Design, Vol. 186, 108369. - ArticleMicrostructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal depositionFroend, M.; Ventzke, V.; Dorn, F.; Kashaev, N.; Klusemann, B.; Enz, J.; (2020)
In: Materials Science and Engineering A, Vol. 772, 138635. - ArticleMechanical integrity of friction-riveted joints for aircraft applicationsBorba, N.; Kötter, B.; Fiedler, B.; dos Santos, J.F.; Amancio-Filho, S.T. (2020)
In: Composite Structures, Vol. 232, 111542. - ArticleRefill friction stir spot welded AA5754-H22/Ti-6Al-4V joints: Microstructural characterization and electrochemical corrosion behavior of aluminum surfacesVacchi, G.; Silva, R.; Plaine, A.; Suhuddin, U.; Alcantara, N.; Sordi, V.; Rovere, C. (2020)
In: Materials Today : Communications, Vol. 22, 100759. - ArticleAn adaptive thermo-mechanical peridynamic model for fracture analysis in ceramicsBazazzadeh, S.; Mossaiby, F.; Shojaei, A. (2020)
In: Engineering Fracture Mechanics, Vol. 223, 106708. - ArticleCombined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peeningSandmann, P.; Nielsen, M.; Keller, S.; Maawad, E.; Staron, P.; Klusemann, B. (2020)
In: Strain : the journal of the British Society for Strain Measurement , Vol. 56, 4, e12338. - ArticleModelling-assisted description of anisotropic edge failure in magnesium sheet alloy under mixed-mode loadingJeong, Y.; Steglich, D. (2020)
In: International Journal of Mechanical Sciences, Vol. 181, 105680. - ArticleNumerical residual strength prediction of stationary shoulder friction stir welding structuresScheider, I.; Barbini, A.; dos Santos, J. (2020)
In: Engineering Fracture Mechanics, Vol. 230, 107010. - ArticleThe Influence of Laser Shock Peening on Fatigue Properties of AA2024-T3 Alloy with a Fastener HoleSikhamov, R.; Fomin, F.; Klusemann, B.; Kashaev, N. (2020)
In: Metals, Vol. 10, 4, 495. - ArticleComputer-Controlled Biaxial Bioreactor for Investigating Cell-Mediated Homeostasis in Tissue EquivalentsEichinger, J.; Paukner, D.; Szafron, J.; Aydin, R.; Humphrey, J.; Cyron, C. (2020)
In: Journal of biomechanical engineering, Vol. 142, 7, 071011. - ArticleInvestigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061Ferreira, A.; Campanelli, L.; Suhuddin, U.; Alcantara, N.; dos Santos, J. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 106, 3523 - 3531. - ArticleSurface Functionalization of Biomedical Ti-6Al-7Nb Alloy by Liquid Metal Dealloying Okulov, I.; Joo, S.; Okulov, A.; Volegov, A.; Luthringer, B.; Willumeit-Römer, R.; Zhang, L.; Mädler, L.; Eckert, J.; Kato, H. (2020)
In: Nanomaterials, Vol. 10, 8, 1479. - ArticleUltra-thin and ultra-strong organic interphase in nanocomposites with supercrystalline particle arrangement: Mechanical behavior identification via multiscale numerical modelingLi, M.; Scheider, I.; Bor, B.; Domènech, B.; Schneider, G.A.; Giuntini, D. (2020)
In: Composites Science and Technology, Vol. 198, 108283. - ArticleThe isothermal evolution of nanoporous gold from the ring perspective - an application of graph theoryZiehmer, M.; Lilleodden, E. (2020)
In: Acta Materialia, Vol. 199, 669 - 679. - ArticleSingle-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performancePina Cipriano, G.; Ahiya, A.; dos Santos, J.; Vilaça, P.; Amancio-Filho, S. (2020)
In: Welding in the World, Vol. 64, 47 - 58. - ArticleRefill friction stir spot welding of AA6082-T6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behaviorHessel Silva, B.; Zepon, G.; Bolfarini, C.; dos Santos, J. (2020)
In: Materials Science and Engineering: A, Vol. 773, 138724. - ArticleNumerical investigation of the influence of FSW parameters on the heat and mass transfer of austenitic stainless steelsda Silva, Y.; Oliveira Júnior, F.; dos Santos, J.; Marcondes, F.; Silva, C. (2020)
In: Welding in the World, Vol. 64, 4, 2019 - 2032. - ArticleProcess-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)Abibe, A.; Sônego, M.; Canto, L.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1027. - ArticleA critical evaluation of microstructure-texture-mechanical behavior heterogeneity in high pressure torsion processed CoCuFeMnNi high entropy alloySonkusare, R.; Biswas, K.; Al-Hamdany, N.; Brokmeier, H.G.; Kalsar, R.; Schell, N.; Gurao, N.P. (2020)
In: Materials Science and Engineering: A, Vol. 782, 139187. - ArticleThe deal.II library, Version 9.2Arndt, D.; Bangerth, W.; Blais, B.; Clevenger, T.C.; Fehling, M.; Grayver, A.V.; Heister, T.; Heltai, L.; Kronbichler, M.; Maier, M.; Munch, P.; Pelteret, J.-P.; Rastak, R.; Tomas, I.; Turcksin, B.; Wang, Z.; Wells, D. (2020)
In: Journal of Numerical Mathematics, Vol. 28, 3, 131 - 146. - ArticleMicrostructure Features and Mechanical Properties of Double-Sided Friction Stir Welded Joints of AA2050-T84 Thick PlatesSantini, F.; Plaine, A.; Afonso, C.; Bergmann, L.; Alcantara, N.; dos Santos, J.; Miyazaki, M. (2020)
In: Materials Research, Vol. 23, 6, e20200309. - ArticleMechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding : Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-SchweißenYamin, M.; Awang, M.; Suhuddin, U.; Sallih, N.; Klusemann, B.; Dos Santos, J. (2020)
In: Materials Science and Engineering Technology - Materialwissenschaft und Werkstofftechnik, Vol. 51, 6, 830 - 835. - ArticleNanoporous High-Entropy Alloy by Liquid Metal DealloyingOkulov, A.; Joo, S.; Kim, H.; Kato, H.; Okulov, I. (2020)
In: Metals, Vol. 10, 10, 1396. - ArticleThe Formation Mechanisms and Improvement Measures for Penetrating Cracks in QAl9-4/Q345B Welded JointWang, J.; Castro, C.; Lu, X. (2020)
In: Journal of Materials Engineering and Performance, Vol. 29, 2346 - 2354. - ArticleInvestigation of prior austenite grain and delta ferrite in CLAM welded joints after different diffusion annealing processesWang, J.; Castro, C.; Zou, Y.; Wang, D.; Lu, X. (2020)
In: Fusion Engineering and Design, Vol. 159, 111815. - ArticleNanotomographic evaluation of precipitate structure evolution in a Mg–Zn–Zr alloy during plastic deformationZeller-Plumhoff, B.; Robisch, A.; Pelliccia, D.; Longo, E.; Slominska, H.; Hermann, A.; Krenkel, M.; Storm, M.; Estrin, Y.; Willumeit-Römer, R.; Salditt, T.; Orlov, D. (2020)
In: Scientific Reports, Vol. 10, 16101 . - ArticleA combined compression and indentation study of mechanical metamaterials based on inverse opal coatingsdo Rosário, J.; Häntsch, Y.; Schneider, G.; Lilleodden, E. (2020)
In: Acta Materialia, Vol. 195, 98 - 108. - ArticleAn investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid jointsFeistauer, E.; dos Santos, J.; Amanci-Filho, S. (2020)
In: Welding in the World, Vol. 64, 1481 - 1495. - ArticleComment to “Skeletonization-based beam finite element models for stochastic bicontinuous materials: Application to simulations of nanoporous gold” by C. Soyarslan et al. [J. Mater. Res. 33(20), 3371 (2018)]Huber, N.; Richert, C. (2020)
In: Journal of Materials Research, Vol. 35, 20, 2831 - 2834. - ArticlePrediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfacesAlessio, R.; Andre, N.; Goushegir, S.; dos Santos, J.; Mazzaferro, J.; T. Amancio-Filho, S. (2020)
In: Materials Today Communications, Vol. 24, 101205. - ArticleImpact resistance of metal-composite hybrid joints produced by frictional heatAndré, N.; dos Santos, J.; Amancio-Filho, S. (2020)
In: Composite Structures, Vol. 233, 111754. - ArticleA Review of Experimentally Informed Micromechanical Modeling of Nanoporous Metals: From Structural Descriptors to Predictive Structure–Property Relationships Richert, C.; Huber, N. (2020)
In: Materials, Vol. 13, 15, 3307. - ArticlePrediction of elastic-plastic deformation of nanoporous metals by FEM beam modeling: A bottom-up approach from ligaments to real microstructuresOdermatt, A.; Richert, C.; Huber, N. (2020)
In: Materials Science and Engineering A, Vol. 791, 139700. - ArticleOpen Porous α + β Titanium Alloy by Liquid Metal Dealloying for Biomedical ApplicationsBerger, S.; Okulov, I. (2020)
In: Metals, Vol. 10, 11, 1450. - ArticleCharacterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steelBatistao, B.; Bergmann, L.; Gargarela, P.; Alcantara, N.; dos Santos, J.; Klusemann, B. (2020)
In: Journal of Materials Research and Technology, Vol. 9, 6, 15132 - 15142. - ArticleGiant electrochemical actuation in a nanoporous silicon-polypyrrole hybrid materialBrinker, M.; Dittrich, G.; Richert, C.; Lakner, P.; Krekeler, T.; Keller, T.; Huber, N.; Huber, P. (2020)
In: Science Advances, Vol. 6, 40, eaba1483. - ArticleDirichlet absorbing boundary conditions for classical and peridynamic diffusion-type modelsShojaei, A.; Hermann, A.; Seleson, P.; Cyron, C. (2020)
In: Computational Mechanics, Vol. 66, 773 - 793.
2019
- ArticleSurface-to-Volume Ratio Drives Photoelelectron Injection from Nanoscale Gold into ElectrolyteGraf, M.; Jalas, D.; Weissmüller, J.; Petrov, A.Y.; Eich, M. (2019)
In: ACS Catalysis, Vol. 9, 4, 3366 - 3374. - ArticleEvaluation of Joint Formation and Mechanical Performance of the AA7075-T6/CFRP Spot Joints Produced by Frictional HeatManente Andre, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 891. - ArticleGeneral multi-fidelity framework for training artificial neural networks with computational modelsAydin, R.C.; Braeu, F.A.; Cyron, C.J. (2019)
In: Frontiers in Materials, Vol. 6, 61. - ArticleThe effect of grain boundary precipitates on stress corrosion cracking in a bobbin tool friction stir welded Al-Cu-Li alloyEntringer, J.; Meisnar, M.; Reimann, M.; Blawert, C.; Zheludkevich, M.; dos Santos, J.F. (2019)
In: Materials Letters: X, Vol. 2, 100014. - ArticleInfluence of Cu/Li ratio on the microstructure evolution of bobbin-tool friction stir welded Al–Cu–Li alloysEntringer, J.; Reimann, M.; Norman, A.; dos Santos, J.F. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 2031 - 2040. - ArticleMicrostructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints Using an AddJoining TechniqueFalck, R.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 864. - ArticleFatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al‐Mg‐Cu alloyBraga, D.F.O.; Maciel, R.; Bergmann, L.; da Silva, L.F.M.; Infante, V.; dos Santos, J.F.; Moreira, P.M.G.P. (2019)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 42, 6, 1262 - 1270. - ArticleA Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials MechanicsBock, F.E.; Aydin, R.C.; Cyron, C.J.; Huber, N.; Kalidindi, S.R.; Klusemann, B. (2019)
In: Frontiers in Materials, Vol. 6, 110. - ArticleEffect of Laser Peening Process Parameters and Sequences on Residual Stress ProfilesKallien, Z.; Keller, S.; Ventzke, V.; Kashaev, N.; Klusemann, B. (2019)
In: Metals, Vol. 9, 6, 655. - ArticleResidual stress characterization in friction stir welds of alloy 625Lemos, G.V.B.; Farina, A.B.; Menezes Nunes, R.; Pereira da Cunha, P.H.C.; Bergmann, L.; dos Santos, J.F.; Reguly, A. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 3, 2528 - 2537. - ArticleSurface-driven actuation: Sign reversal under load and surface load-memory effectLiu, L.-Z.; Mameka, N.; Markmann, J.; Jin, H.-J.; Weissmueller, J. (2019)
In: Physical Review Materials, Vol. 3, 6, 066001. - ArticleMechanics of the stomach: A review of an emerging field of biomechanicsBrandstaeter, S.; Fuchs, S.L.; Aydin, R.C.; Cyron, C.J. (2019)
In: GAMM-Mitteilungen, Vol. 42, 3, e201900001. - ArticleEffect of friction spot welding parameters on the joint formation and mechanical properties of Al to CuCardillo, M.E.B.; Shen, J.; de Alcantara, N.G.; Afonso, C.R.M.; dos Santos, J.F. (2019)
In: Welding in the World, Vol. 63, 1, 33 - 41. - ArticleAnomalously low modulus of the interpenetrating-phase composite of Fe and Mg obtained by liquid metal dealloyingOkulov, I.V.; Geslin, P.-A.; Soldatov, I.V.; Ovri, H.; Joo, S.-H.; Kato, H. (2019)
In: Scripta Materialia, Vol. 163, 133 - 136. - ArticleEffect of welding speed on friction stir welds of GL E36 shipbuilding steelCosta Pereira da Cunha, P.H.; Braga, Lemos, G,V.; Bergmann, L.; Reguly, A.; dos Santos, J.F.; Marinho, R.R.; Piza Paes, M.T. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 1, 1041 - 1051. - ArticleThe Influence of Clamping Pressure on Joint Formation and Mechanical Performance of Ti6Al4V/CF-PEEK Friction-Riveted JointsZocoller Borba, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 5, 745. - ArticleApplication of design of experiments for laser shock peening process optimizationChupakhin, S.; Klusemann, B.; Huber, N.; Kashaev, N. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 102, 5 - 8, 1567 - 1581. - ArticleFundamentals of Force-Controlled Friction Riveting: Part II - Joint Global Mechanical Performance and Energy EfficiencyCipriano, G.P.; Blaga, L.A.; dos Santos, J.F.; Vilaca, P.; Amancio-Filho, S.T. (2019)
In: Materials, Vol. 11, 12, 2489. - ArticleIntergranular corrosion evaluation of friction stir welded AISI 410S ferritic stainless steelQueiroz Caetano, G.de; Carvalho Silva, C.; Motta, M.F.; Miranda, H.C.; Farias, J.P.; Bergmann, L.A.; dos Santos, J.F. (2019)
In: Journal of Materials Science and Technology, Vol. 8, 2, 1878 - 1887. - ArticleGrain-wise simulation of stochastic damage and failure verified on a TiAl polycrystal Kabir, M.R.; Cornec, A. (2019)
In: Materials Science and Engineering A, Vol. 748, 146 - 160. - ArticleNumerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.; Hönnige, J.R.; Martina, F.; Neto, L.; Kashaev, N.; Colegrove, P.; Williams, S.; Klusemann, B. (2019)
In: Journal of Materials Engineering and Performance, Vol. 28, 8, 4931 - 4942. - ArticleThe scaled boundary finite element method for computational homogenization of heterogeneous mediaTalebi, H.; Silani, M.; Klusemann, B. (2019)
In: International Journal for Numerical Methods in Engineering, Vol. 118, 1, 1 - 17. - ArticleNanoporous gold: a hierarchical and multiscale 3D test pattern for characterizing X-ray nano-tomography systemsLarsson, E.; Guersoy, D.; De Carlo, F.; Lilleodden, E.T.; Storm, M.; Wilde, F.; Hu, K.; Mueller, M.; Greving, I. (2019)
In: Journal of Synchrotron Radiation, Vol. 26, 1, 194 - 204. - ArticleGrain-scale investigation of the anisotropy of Portevin-Le Chatelier effect in Mg AZ91 alloyOvri, H.; Steglich, D.; Dieringa, H.; Lilleodden, E.T. (2019)
In: Materials Science and Engineering A, Vol. 740-741, 226 - 234. - ArticleAnisotropic stiffness and tensional homeostasis induce a natural anisotropy of volumetric growth and remodeling in soft biological tissuesBraeu, F.A.; Aydin, R.C.; Cyron, C.J. (2019)
In: Biomechanics and Modeling in Mechanobiology, Vol. 18, 327 - 345. - ArticleWork hardening and recovery in fully lamellar TiAl: relative activity of deformation systemsSchnabel, J.E.; Bargmann, S.; Paul, J.D.H.; Oehring, M.; Pyczak, F. (2019)
In: Philosophical Magazine, Vol. 99, 2, 148 - 180. - ArticleLaser welding and microstructural characterization of dissimilar γ-TiAl-Ti6242 jointsBurkhardt, I.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Enz, J. (2019)
In: Intermetallics, Vol. 104, 74 - 83. - ArticleComputational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive modelRaza, S.H.; Soyarslan, C.; Bargmann, S.; Klusemann, B. (2019)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 344, 887 - 909. - ArticleTopology evolution during coarsening of nanoscale metal network structuresLi, Y.; Ngo, B.-N.D.; Markmann, J.; Weissmueller, J. (2019)
In: Physical Review Materials, Vol. 3, 7, 076001. - ArticleExperimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peeningKeller, S.; Horstmann, M.; Kashaev, N.; Klusemann, B. (2019)
In: International Journal of Fatigue, Vol. 124, 265 - 276. - ArticleOn the Estimation of Thermal Activation Parameters for Portevin–Le Chatelier Effect from Nanoindentation DataOvri, H.; Lilleodden, E.T. (2019)
In: JOM: Journal of the Minerals, Metals and Materials Society, Vol. 71, 10, 3343 - 3349. - ArticleApplication of response surface methodology for optimization of hybrid friction diffusion bonding of tube-to-tube-sheet connections in coil-wound heat exchangersAlba, D.; Roos, A.; Wimmer, G.; Gonzalez, A.; Hanke, S.; Dos Santos, J. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 1701 - 1711. - ArticleNumerical Investigation of Polymer Coated Nanoporous GoldGnegel, S.; Li, J.; Mameka, N.; Huber, N.; Düster, A. (2019)
In: Materials, Vol. 12, 13, 2178. - ArticleThermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid JointsSonego, M.; Abibe, A.; Canevarolo, S.; Bettini, S.; dos Santos, J.; Canto, L.; Amancio-Filho, S. (2019)
In: International Polymer Processing, Vol. 34, 1, 100 - 110. - ArticleA study of the parameters influencing mechanical properties and the fatigue performance of refill friction stir spot welded AlMgSc alloyLage, S.; Campanelli, L.; Guerra, A.; Shen, J.; dos Santos, J.; da Silva, P.; Bolfarini, C. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 100, 101 - 110. - ArticleA review on direct assembly of through‐the‐thickness reinforced metal–polymer composite hybrid structuresFeistauer, E.; dos Santos, J.; Amancio-Filho, S. (2019)
In: Polymer Engineering & Science, Vol. 59, 4, 661 - 674. - ArticleElectro-chemo-mechanical coupling of nanoporous gold at the microscale Wu, Y.; Markmann, J.; Lilleodden, E. (2019)
In: Applied Physics Letters, Vol. 115, 25, 251602. - ArticleEffect of fluoride-mediated transformations on electrocatalytic performance of thermally treated TiO2 nanotubular layersMaltanava, H.; Poznyak, S.; Ivanovskaya, M.; Scharnagl, N.; Starykevich, M.; Salak, A.; de Rosario Soares, M.; Mazanik, A. (2019)
In: Journal of Fluorine Chemistry , Vol. 221, 34 - 41. - ArticleComparison of Friction Surfacing Process and Coating Characteristics of Ti-6Al-4V and Ti Grade 1Vale, N.; Fitseva, V.; Urtiga Filho, S.; dos santos, J.; Hanke, S. (2019)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 71, 4339 - 4348. - ArticleLaser Beam Welding of a Low Density Refractory High Entropy AlloyPanina, E.; Yurchenko, N.; Zherebtsov, S.; Stepanov, N.; Salishchev, G.; Ventzke, V.; Dinse, R.; Kashaev, N. (2019)
In: Metals, Vol. 9, 12, 1351. - ArticleFriction stir welding of thermoplastics with a new heat-assisted tool design: mechanical properties and microstructureMoochani, A.; Omidvar, H.; Ghaffarian, S.; Goushegir, S. (2019)
In: Welding in the World, Vol. 63, 181 - 190. - ArticleOn measuring the independent mechanical response of the polymer phase from nanoporous gold polymer compositesHablitzel, M.; Lilleodden, E. (2019)
In: Scripta Materialia, Vol. 170, 67 - 70. - ArticleDetermination of the traverse force in friction stir welding with different tool pin profilesSu, H.; Wu, C. (2019)
In: Science and Technology of Welding and Joining, Vol. 24, 3, 209 - 217. - ArticleDevelopment of laser straightening (LS) strategies to remove distortion in welded aeronautical structuresÁlvarez, P.; Escribano, R.; Zubiri, F.; Fomin, F.; Kashaev, N.; Bauer, S. (2019)
In: AIP Conference Proceedings, Vol. 2113, 070003. - ArticlePreparation and Characterization of Zeolite type 4A using Kaolin from Ajebo; Nigeria Mgbemere, H.; Ekpe, I.; Lawal1, G.; Ovri, H.; Chaudhary, A. (2019)
In: Pertanika journal of science & technology, Vol. 27, 4, 2427 - 2438. - ArticleComputation of Thickness and Mechanical Properties of Interconnected Structures: Accuracy, Deviations, and Approaches for CorrectionRichert, C.; Odermatt, A.; Huber, N. (2019)
In: Frontiers in Materials, Vol. 6, 327. - ArticleEffects of Friction Surfacing on the Characteristics of Consumable Rods of Ti-6Al-4Vdo Vale, N.; Fitseva, V.; Hanke, S.; Filho, S.; dos Santos, J. (2019)
In: Materials Research : Revista Brasileira de Materiais , Vol. 22, e20180888. - ArticleUltrastrong nanocomposites with interphases: Nonlocal deformation and damage behaviorMa, S.; Scheider, I.; Bargmann, S. (2019)
In: European Journal of Mechanics: A, Solids, Vol. 75, 93 - 108. - ArticleModeling twinning-induced lattice reorientation and slip-in-twin deformation Husser, E.; Bargmann, S. (2019)
In: Journal of the Mechanics and Physics of Solids, Vol. 122, 315 - 339. - ArticleGrowth and remodelling of living tissues: perspectives, challenges and opportunitiesAmbrosi, D.; Ben Amar, M.; Cyron, C,J.; De Simone, A.; Goriely, A.; Humphrey, J.D.; Kuhl, E. (2019)
In: Journal of the Royal Society Interface, Vol. 16, 157, 20190233. - ArticleCorrosion behavior of metal–composite hybrid joints: Influence of precipitation state and bonding zonesAndre, N.M.; Bouali, A.; Maawad, E.; Staron, P.; dos Santos, J.F.; Zheludkevich, M.L.; Amancio-Filho, S.T. (2019)
In: Corrosion Science, Vol. 158, 108075. - ArticleFatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloyKashaev, N.; Ventzke, V.; Petrov, N.; Horstmann, M.; Zherebtsov, S.; Shaysultanov, D.; Sanin, V.; Stepanov, N. (2019)
In: Materials Science and Engineering A, Vol. 766, 138358. - ArticleThermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiancesFroend, M.; Ventzke, V.; Kashaev, N.; Klusemann, B.; Enz, J. (2019)
In: Additive Manufacturing, Vol. 29, 100800. - ArticleTwo-step simulation approach for laser shock peeningPozdnyakov, V.; Keller, S.; Kashaev, N.; Klusemann, B.; Oberrath, J. (2019)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 19, 1, e201900497. - ArticleCrack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approachKeller, S.; Horstmann, M.; Kashaev, N.; Klusemann, K. (2019)
In: Engineering Fracture Mechanics, Vol. 221, 106630.
2018
- ArticleInfluence of Cu/Li Ratio on the Welding Forces and Mechanical Properties of Two Bobbin Tool Friction Stir Welded Al-Cu-Li AlloysGoebel, J.; Reimann, M.; dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5212 - 5219. - ArticleLaser beam welding of a CoCrFeNiMn-type high entropy alloy produced by self-propagating high-temperature synthesisKashaev, N.; Ventzke, V.; Stepanov, N.; Shaysultanov, D.; Sanin, V.; Zherebtsov, S. (2018)
In: Intermetallics, Vol. 96, 63 - 71. - ArticleMicrostructure Evolution and Mechanical Properties of Keyhole Repair Welds in AA 2219-T851 using Refill Friction Stir Spot WeldingReimann, M.; Goebel, J.; dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5220 - 5226. - ArticleProcess development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laserFroend, M.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Journal of Manufacturing Processes, Vol. 34 A, 721 - 732. - ArticleNanoporous magnesiumOkulov, I.V.; Lamaka, S.V.; Wada, T.; Yubuta, K.; Zheludkevich, M.L.; Weissmueller, J.; Markmann, J.; Kato, H. (2018)
In: Nano Research , Vol. 11, 12, 6428 - 6435. - ArticleA method for the in-situ study of solid-state joining techniques using synchrotron radiation - observation of phase transformations in Ti-6Al-4V after friction surfacingHanke, S.; Staron, P.; Fischer, T.; Fitseva, V.; dos Santos, J.F. (2018)
In: Surface and Coatings Technology, Vol. 335, 355 - 367. - ArticleHot cracking behaviour of an autogenously laser welded Al-Cu-Li alloyEnz, J.; Carrarin, C.; Riekehr, S.; Ventzke, V.; Kashaev, N. (2018)
In: The International Journal of Advanced Manufacturing Technology, Vol. 95, 1-4, 299 - 310. - ArticleUnderstanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulationdos Santos, J.F.; Staron, P.; Fischer, T.; Robson, J.D.; Kostka, A.; Colegrove, P.; Wang, H.; Hilgert, J.; Bergmann, L.; Huetsch, L.L.; Huber, N.; Schreyer, A. (2018)
In: Acta Materialia, Vol. 148, 163 - 172. - ArticleExperimental and numerical investigation of residual stresses in laser shock peened AA2198Keller, S.; Chupakhin, S.; Staron, P.; Maawad, E.; Kashaev, N.; Klusemann, B. (2018)
In: Journal of Materials Processing Technology, Vol. 255, 294 - 307. - ArticleEffect of reverse material flow on the microstructure and performance of friction stir welded T-joints of an Al-Mg alloyFeistauer, E.E.; Bergmann, L.A.; dos Santos, J.F. (2018)
In: Materials Science and Engineering A, Vol. 731, 454 - 464. - Article3D stochastic bicontinuous microstructures: Generation, topology and elasticitySoyarslan, C.; Bargmann, S.; Pradas, M.; Weissmueller, J. (2018)
In: Acta Materialia, Vol. 149, 326 - 340. - ArticleElectrocapillary Coupling at Metal Surfaces from First Principles: On the Impact of Excess Charge on Surface Stress and RelaxationMichl, A.; Weissmueller, J.; Mueller, S. (2018)
In: Langmuir, Vol. 34, 16, 4920 - 4928. - ArticleDealloyed nanoporous materials with interface-controlled behaviorWeissmueller, J.; Sieradzki, K. (2018)
In: MRS Bulletin, Vol. 43, 1, 14 - 19. - ArticleSkeletonization, Geometrical Analysis, and Finite Element Modeling of Nanoporous Gold Based on 3D Tomography DataRichert, C.; Huber, N. (2018)
In: Metals, Vol. 8, 4, 282. - ArticleOxygen Adsorption and Low-Temperature CO Oxidation on a Nanoporous Au Catalyst: Reaction Mechanism and Foreign Metal Effects Wang, L.C.; Zhong, Y.; Widmann, D.; Weissmueller, J.; Behm, R.J. (2018)
In: Topics in Catalysis, Vol. 61, 5-6, 446 - 461. - ArticleFracture prediction based on a two-surface plasticity law for the anisotropic magnesium alloys AZ31 and ZE1Lee, J.-Y.; Steglich, D.; Lee, M.-G. (2018)
In: International Journal of Plasticity, Vol. 105, 1 - 23. - ArticleEstudo da Sensitizacao em Juntas Soldadas de Inconel® 625 Produzidas Atraves da Soldagem por Friccao e Mistura Mecanica - Sensitization Study in Friction Stir Welds of Inconel®625Martinazzi, D.; Lemos, G.V.B.; Cardoso, H.R.P.; dos Santos, R.E.; Ferreira, J.Z.; Bergmann, L.; dos Santos, J.F.; Reguly, A. (2018)
In: Periodico Tche Quimica, Vol. 15, 29, 53 - 60. - ArticleImproving the fatigue performance of airframe structures via the hybridized application of geometrical modifications and laser heatingLu, J.; Huber, N.; Kashaev, N. (2018)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 41, 5, 1183 - 1195. - ArticleImproving weld formability by a novel dual-rotation bobbin tool friction stir weldingWang, F.F.; Li, W.Y.; Shen, J.; Wen, Q.; dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 135 - 139. - ArticleTexture Development and Material Flow Behavior During Refill Friction Stir Spot Welding of AlMgScShen, J.; Lage, S.B.M.; Suhuddin, U.F.H.; Bolfarini, C.; dos Santos, J.F. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 1, 241 - 254. - ArticleAddJoining: a novel additive manufacturing approach for layered metal-polymer hybrid structuresFalck, R.; Goushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 217, 211 - 214. - ArticleComposite surface pre-treatments: improvement on adhesion mechanisms and mechanical performance of metal-composite friction spot joints with additional film interlayerManente Andre, N.; Goushegir, S.M.; Scharnagl, N.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2018)
In: The Journal of Adhesion , Vol. 94, 9, 723 - 742. - ArticleRetrieval of Water Constituents from Hyperspectral In-Situ Measurements under Variable Cloud Cover—A Case Study at Lake Stechlin (Germany)Goeritz, A.; Berger, S.A.; Gege, P.; Grossart, H.-P.; Nejsrgaard, J.C.; Riedel, S.; Roettgers, R.; Utschig, C. (2018)
In: Remote Sensing, Vol. 10, 2, 181. - ArticleGeneration of 3D representative volume elements for heterogeneous materials: A reviewBargmann, S.; Klusemann, B.; Markmann, J.; Schnabel, J.E.; Schneider, K.; Soyarslan, C.; Wilmers, J. (2018)
In: Progress in Materials Science, Vol. 96, 322 - 384. - ArticleMechanical response of nanoporous metals: A story of size, surface stress, and severed strutsJin, H.-J.; Weissmueller, J.; Farkas, D. (2018)
In: MRS Bulletin, Vol. 43, 1, 35 - 42. - ArticleDealloying-based metal-polymer composites for biomedical applicationsOkulov, A.V.; Volegov, A.S.; Weissmueller, J.; Markmann, J.; Okulov, I.V. (2018)
In: Scripta Materialia, Vol. 146, 290 - 294. - ArticleInvestigating the impact of sustainability in the production of aeronautical subscale componentsGialos, A.A.; Zeimpekis, V.; Alexopoulos, N.D.; Kashaev, N.; Riekehr, S.; Karanika, A. (2018)
In: Journal of Cleaner Production, Vol. 176, 785 - 799. - ArticleMechanochemistry breaks with expectationsWeissmueller, J. (2018)
In: Nature Catalysis, Vol. 1, 1, 238 - 239. - ArticleInfluence of Alloys Position, Rolling and Welding Directions on Properties of AA2024/AA7050 Dissimilar Butt Weld Obtained by Friction Stir WeldingBarbini, A.; Carstensen, J.; dos Santos, J.F. (2018)
In: Metals, Vol. 8, 4, 202. - ArticleDirect-Friction Riveting of polymer composite laminates for aircraft applicationsBorba, N.Z.; Blaga, L.; dos Santos, J.F.; Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 215, 31 - 34. - ArticleOpen porous dealloying-based biomaterials as a novel biomaterial platformOkulov, I.V.; Okulov, A.V.; Soldatov, I.V.; Luthringer, B.; Willumeit-Roemer, R.; Wada, T.; Kato, H.; Weissmueller, J.; Markmann, J. (2018)
In: Materials Science and Engineering C, Vol. 88, 95 - 103. - ArticleInfluence of rotation speed and axial force on the friction stir welding of AISI 410S ferritic stainless steelde Queiroz Caetano, G.; Silva, C.C.; Motta, M.F.; Miranda, H.C.; Farias, J.P.; Bergmann, L.A.; dos Santos, J.F. (2018)
In: Journal of Materials Processing Technology, Vol. 262, 430 - 436. - ArticleComputational model of gastric motility with active‐strain electromechanicsBrandstaeter, S.; Gizzi, A.; Fuchs, S.L.; Gebauer, A.M.; Aydin, R.C.; Cyron, C.J. (2018)
In: Zeitschrift fuer angewandte Mathematik und Mechanik : ZAMM, Vol. 98, 12, 2177 - 2197. - ArticleParameter development and characterization of laser metal deposited high-temperature Ti alloy powdersBurkhardt, I.; Visone, R.; Riekehr, S.; Rackel, M.W.; Kashaev, N.; Enz, J. (2018)
In: Procedia CIRP, Vol. 74, 176 - 179. - ArticlePrecipitation Kinetics of AA6082: An Experimental and Numerical Investigation Herrnring, J.; Kashaev, N.; Klusemann, B. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 1411 - 1417. - ArticleInfluence of a non-rotating shoulder on heat generation, microstructure and mechanical properties of dissimilar AA2024/AA7050 FSW jointsBarbini, A.; Carstensen, J.; dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 119 - 127. - ArticleMetallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam weldingFomin, F.; Froend, M.; Ventzke, V.; Alvarez, P.; Bauer, S.; Kashaev, N. (2018)
In: The International Journal of Advanced Manufacturing Technology, Vol. 97, 5-8, 2019 - 2031. - ArticleVerifying Larché-Cahn elasticity, a milestone of 20th-century thermodynamicsShi, S.; Markmann, J.; Weissmueller, J. (2018)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 115, 43, 10914 - 10919. - ArticleProbabilistic fatigue-life assessment model for laser-welded Ti-6Al-4V butt joints in the high-cycle fatigue regimeFomin, F.; Horstmann, M.; Huber, N.; Kashaev, N. (2018)
In: International Journal of Fatigue, Vol. 116, 22 - 35. - ArticleSurface modification methods for fatigue properties improvement of laser welded Ti64 butt jointsFomin, F.; Klusemann, B.; Kashaev, N. (2018)
In: Procedia Structural Integrity , Vol. 13, 273 - 278. - ArticleConnections Between Topology and Macroscopic Mechanical Properties of Three-Dimensional Open-Pore MaterialsHuber, N. (2018)
In: Frontiers in Materials, Vol. 5, 69. - ArticleMicrostructure and hardness evolution of laser metal deposited AA5087 wall-structuresFroend, M.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Procedia CIRP, Vol. 74, 131 - 135. - ArticlePhase formation, microstructure and deformation behavior of heavily alloyed TiNb- and TiV-based titanium alloysOkulov, I.V.; Boenisch, M.; Okulov, A.V.; Volegov, A.S.; Attar, H.; Ehtemam-Haghighi, S.; Calin, M.; Wang, Z.; Hohenwarter, A.; Kaban, I.; Prashanth, K.G.; Eckert, J. (2018)
In: Materials Science and Engineering A, Vol. 733, 80 - 86. - ArticleTailoring the Strength of Nanoporous Gold by Self-Assembled Monolayers of AlkanethiolsMameka, N.; Luehrs, L.; Heissler, S.; Gliemann, H.; Woell, C. (2018)
In: ACS Applied Nano Materials, Vol. 1, 12, 6613 - 6621. - ArticleStudy of slip activity in a Mg-Y alloy by in situ high energy X-ray diffraction microscopy and elastic viscoplastic self-consistent modelingWang, L.; Huang, Z.; Wang, H.; Maldar, A.; Yi, S.; Park, J.; Kenesei, P.; Lilleodden, E.; Zeng, X. (2018)
In: Acta Materialia, Vol. 155, 138 - 152. - ArticleEnhanced Wear Performance of Hybrid Epoxy-Ceramic Coatings on Magnesium SubstratesYang, J.; Di, S.; Blawert, C.; Lamaka, S.V.; Wang, L.; Fu, B.; Jiang, P.; Wang, L.; Zheludkevich, M.L. (2018)
In: ACS Applied Materials and Interfaces, Vol. 10, 36, 30741 - 30751. - ArticleEfficient analysis of stress concentrations in laminated composite structures with geometric discontinuitiesSchnabel, J.E.; Mittelstedt, C. (2018)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 18, 1, e201800046. - ArticleExperimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087 Froend, M.; Bock, F.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 988 - 994. - ArticleDevelopment of an optimised shielding strategy for laser beam welding of Ti6Al2Sn4Zr2Mo Burkhardt, I.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Enz, J. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 1404 - 1410. - ArticleResidual stress and microstructural features of friction-stir-welded GL E36 shipbuilding steelLemos, G.V.B.; Cunha, P.H.C.P.; Nunes, R.M.; Bergmann, L.; dos Santos, J.F.; Clarke, T. (2018)
In: Materials Science and Technology, Vol. 34, 1, 95 - 103. - ArticleFundamentals of Force-Controlled Friction Riveting: Part I - Joint Formation and Heat DevelopmentCipriano, G.P.; Blaga, L.A.; dos Santos, J.F.; Vilaca, P.; Amancio-Filho, S.T. (2018)
In: Materials, Vol. 11, 11, 2294. - ArticleInfluence of different Al-Cu substrates on the properties of laser metal deposited Al coatingsEnz, J.; Lolos, C.; Riekehr, S.; Ventzke, V.; Kashaev, N. (2018)
In: Procedia CIRP, Vol. 74, 127 - 130. - ArticleMicrostructure and morphology evolution of probeless friction stir spot welded joints of aluminum alloyLi, W.; Chu, Q.; Yang, X.; Shen, J.; Vairis, A.; Wang, W. (2018)
In: Journal of Materials Processing Technology, Vol. 252, 69 - 80. - ArticleResidual stresses and fatigue crack growth in friction surfacing coated Ti-6Al-4V sheetsDovzhenko, G.; Hanke, S.; Staron, P.; Maawad, E.; Schreyer, A.; Horstmann, M. (2018)
In: Journal of Materials Processing Technology, Vol. 262, 104 - 110. - ArticleProspects of laser beam welding and friction stir welding processes for aluminum airframe structural applicationsKashaev, N.; Ventzke, V.; Cam, G. (2018)
In: Journal of Manufacturing Processes, Vol. 36, 571 - 600. - ArticleOn the topological; morphological; and microstructural characterization of nanoporous metalsLilleodden, E.; Voorhees, P. (2018)
In: MRS Bulletin, Vol. 43, 20 - 26. - ArticleOn a novel strain indicator based on uncorrelated misorientation angles for correlating dislocation density to local strengthGuglielmi, P.O.; Ziehmer, M.; Lilleodden, E.T. (2018)
In: Acta Materialia, Vol. 150, 195 - 205. - ArticleMicrostructure and microhardness of wire-based laser metal deposited AA5087 using an Ytterbium fibre laserFroend, M.; Ventzke, V.; Riekehr, S.; Kashaev, N.; Klusemann, B.; Enz, J. (2018)
In: Materials Characterization, Vol. 143, 59 - 67. - ArticleSynthesis of uniform bulk nanoporous palladium with tunable structureShi, S.; Markmann, J.; Weissmueller, J. (2018)
In: Electrochimica Acta, Vol. 285, 60 - 69. - ArticleMultiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082Herrnring, J.; Staron, P.; Kashaev, N.; Klusemann, B. (2018)
In: Materialia, Vol. 3, 243 - 255.
2017
- ArticleRefilling termination hole in AA 2198–T851 by refill friction stir spot welding Reimann, M.; Goebel, J.; Gartner, T.M.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 157 - 166. - ArticleFully periodic RVEs for technological relevant composites: not worth the effort!Schneider, K.; Klusemann, B.; Bargmann, S. (2017)
In: Journal of Mechanics of Materials and Structures, Vol. 12, 4, 471 - 484. - ArticleFiber laser welding of dissimilar titanium (Ti-6Al-4V/cp-Ti) T-joints and their laser forming process for aircraft applicationFroend, M.; Fomin, F.; Riekehr, S.; Alvarez, P.; Zubiri, F.; Bauer, S.; Klusemann, B.; Kashaev, N. (2017)
In: Optics and Laser Technology, Vol. 96, 123 - 131. - ArticleResidual Stress Evaluation in Friction Stir Welds of Inconel 625 - Avaliacao das Tensoes Residuais em Juntas Soldadas de Inconel 625 Obtidas Atraves da Soldagem por Friccao e Mistura Mecanica Lemos, G.V.B.; Nunes, R.M.; Doll, P.; Bergmann, L.; Strohaecker, T.R.; dos Santos, J.F. (2017)
In: Soldagem & Inspecao, Vol. 22, 1, 35 - 45. - ArticleProcess Optimization and Microstructure Analysis in Refill Friction Stir Spot Welding of 3-mm-thick Al-Mg-Si Aluminum AlloySantana, L.M.; Suhuddin, U.F.H.; Oelscher, M.H.; Strohaecker, T.R.; dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 4213 - 4220. - ArticleInterface Elasticity Effects in Polymer-Filled Nanoporous MetalsWilmers, J.; McBride, A.; Bargmann, S. (2017)
In: Journal of the Mechanics and Physics of Solids, Vol. 99, 163 - 177. - ArticleSurface excess elasticity of gold: Ab initio coefficients and impact on the effective elastic response of nanowiresElsner, B.A.M.; Mueller, S.; Bargmann, S.; Weissmueller, J. (2017)
In: Acta Materialia, Vol. 124, 468 - 477. - ArticleHysteresis Analysis and Control of a Metal-Polymer Hybrid Soft Actuator Schimmack, M.; Feistauer, E.E.; Amancio-Filho, S.T.; Mercorelli, P. (2017)
In: Energies, Vol. 10, 4, 508. - ArticleClosed-form formulas for the effective properties of random particulate nanocomposites with complete Gurtin–Murdoch model of material surfacesNazarenko, L.; Bargmann, S.; Stolarski, H. (2017)
In: Continuum Mechanics and Thermodynamics, Vol. 29, 1, 77 - 96. - ArticleAccessing Colony Boundary Strengthening of Fully Lamellar TiAl Alloys via Micromechanical ModelingSchnabel, J.E.; Bargmann, S. (2017)
In: Materials, Vol. 10, 8, 896. - ArticleFree-edge stress fields in cylindrically curved symmetric and unsymmetric cross-ply laminates under bending loadSchnabel, J.E.; Yousfi, M.; Mittelstedt, C.; (2017)
In: Composite Structures, Vol. 180, 862 - 875. - ArticleUltrasound Assisted Casting of an AM60 Based Metal Matrix Nanocomposite, Its Properties, and Recyclability Dieringa, H.; Katsarou, L.; Buzolin, R.; Szakacs, G.; Horstmann, M.; Wolff, M.; Mendis, C.; Vorozhtsov, S.; John, D.St. (2017)
In: Metals, Vol. 7, 10, 388. - ArticleComparative study of severe plastic deformation at elevated temperatures of two aluminium alloys during friction surfacingHanke, S.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 247, 257 - 267. - ArticleMicrostructure and mechanical performance of autogenously fibre laser beam welded Ti-6242 butt jointsKashaev, N.; Pugachev, D.; Ventzke, V.; Fomin, F.; Burkhardt, I.; Enz, J.; Riekehr, S. (2017)
In: Materials Science and Engineering A, Vol. 694, 110 - 120. - ArticleOn the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted JointsZocoller Borba, N.; Afonso, C.R.M.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2017)
In: Materials, Vol. 10, 2, 184. - ArticleInfluence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V Fitseva, V.; Hanke, S.; dos Santos, J.F. (2017)
In: Materials and Manufacturing Processes, Vol. 32, 5, 557 - 563. - ArticleInfluence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap jointsGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2017)
In: Welding in the world, Vol. 61, 6, 1099 - 1115. - ArticleEffects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimensKashaev, N.; Ventzke, V.; Horstmann, M.; Chupakhin, S.; Riekehr, S.; Falck, R.; Maawad, E.; Staron, P.; Schell, N.; Huber, N. (2017)
In: International Journal of Fatigue, Vol. 98, 223 - 233. - ArticleOn the origin of the anomalous compliance of dealloying-derived nanoporous goldNgo, B.-N.D.; Roschning, B.; Albe, K.; Weissmueller, J.; Markmann, J. (2017)
In: Scripta Materialia, Vol. 130, 74 - 77. - ArticleSilver-rich clusters in nanoporous goldKrekeler, T.; Strasser, A.V.; Graf, M.; Wang, K.; Hartig, C.; Ritter, M.; Weissmueller, J. (2017)
In: Materials Research Letters, Vol. 5, 5, 314 - 321. - ArticleSize affected dislocation activity in crystals: Advanced surface and grain boundary conditionsHusser, E.; Soyarslan, C.; Bargmann, S. (2017)
In: Extreme Mechanics Letters, Vol. 13, 36 - 41. - ArticleDegradation mechanisms of pcBN tool material during Friction Stir Welding of Ni-base alloy 625Hanke, S.; Lemos, G.V.B.; Bergmann, L.; Martinazzi, D.; dos Santos, J.F.; Strohaecker, T.R. (2017)
In: Wear , Vol. A346-A377, 403 - 408. - ArticleFiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical Properties Kashaev, N.; Pugachev, D.; Riekehr, S.; Ventzke, V. (2017)
In: Materials Science Forum, THERMEC 2016, Vol. 879, 903 - 908. - ArticleA continuum damage model for multi-axial low cycle fatigue of porous sintered metals based on the critical plane conceptMa, S.; Yuan, H. (2017)
In: Mechanics of Materials, Vol. 104, 13 - 25. - ArticleMicro-to-nano-scale deformation mechanism of a Ti-based dendritic-ultrafine eutectic alloy exhibiting large tensile ductilityOkulov, I.V.; Boenisch, M.; Volegov, A.S.; Shakur Shahabi, H.; Wendrock, H.; Gemming, T.; Eckert, J. (2017)
In: Materials Science and Engineering A, Vol. 682, 673 - 678. - ArticleDealloying-based interpenetrating-phase nanocomposites matching the elastic behavior of human bone Okulov, I.V.; Weissmueller, J.; Markmann, J. (2017)
In: Scientific Reports, Vol. 7, 20. - ArticleThe Role of Geometrically Necessary Dislocations in Cantilever Beam Bending Experiments of Single CrystalsHusser, E.; Bargmann, S. (2017)
In: Materials, Vol. 10, 3, 289. - ArticleSemi-stationary shoulder bobbin tool friction stir welding of AA2198-T851 Goebel, J.; Reimann, M.; Norman, A.; dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 37 - 45. - ArticleDeformation mechanisms in nanoporous metals: Effect of ligament shape and disorder Jiao, J.; Huber, N. (2017)
In: Computational Materials Science, Vol. 127, 194 - 203. - ArticleMicrostructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steelSuhuddin, U.F.H.; Fischer, V.; Kostka, A.; dos Santos, J.F. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 658 - 665. - ArticleProgress in friction stir welding of Ni alloysLemos, G.V.B.; Hanke, S.; dos Santos, J.F.; Bergmann, L.; Reguly, A.; Strohaecker, T.R. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 643 - 657. - ArticleLocal flow stresses in interpenetrating-phase composites based on nanoporous gold — In situ diffractionWang, K.; Hartig, C.; Blankenburg, M.; Mueller, M.; Guenther, R.; Weissmueller, J. (2017)
In: Scripta Materialia, Vol. 127, 151 - 155. - ArticleNumerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speedsBachmann, M.; Carstensen, J.; Bergmann, L.; dos Santos, J.F.; Wu, C.S.; Rethmeier, M. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 91, 1-4, 1443 - 1452. - ArticleComposition optimization of low modulus and high-strength TiNb-based alloys for biomedical applicationsOkulov, I.V.; Volegov, A.S.; Attar, H.; Boenisch, M.; Ehtemam-Haghighi, S.; Calin, M.; Eckert, J. (2017)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 65, 866 - 871. - ArticleMechanical properties of laser beam welded similar and dissimilar aluminum alloysEnz, J.; Kumar, M.; Riekehr, S.; Ventzke, V.; Huber, N.; Kashaev, N. (2017)
In: Journal of Manufacturing Processes, Vol. 29, 272 - 280. - ArticleEffect of friction spot welding (FSpW) on the surface corrosion behavior of overlapping AA6181-T4/Ti-6Al-4V jointsVacchi, G.S.; Plaine, A.H.; Silva, R.; Sordi, V.L.; Suhuddin, U.F.H.; Alcantara, N.G.; Kuri, S.E.; Rovere, C.A.D.; (2017)
In: Materials and Design, Vol. 131, 127 - 134. - ArticleArtificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drillingChupakhin, S.; Kashaev, N.; Klusemann, B.; Huber, N. (2017)
In: The Journal of Strain Analysis for Engineering Design, Vol. 52, 3, 137 - 151. - ArticleInfluence of Y2O3 nanoparticles on the twinning of single crystalline magnesiumMallmann, C.; Simar, A.; Ferrie, E.; Fivel, M.; Lilleodden, E.T. (2017)
In: Scripta Materialia, Vol. 138, 79 - 82. - ArticleMicrostructure and mechanical behavior of friction spot welded AA6181-T4/Ti6Al4V dissimilar jointsPlaine, A.H.; Suhuddin, U.F.H.; Alcantara, N.G.; dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 3703 - 3714. - ArticleIn Situ Experiment for Laser Beam Welding of Ti Alloys Using High-Energy X-RaysStaron, P.; Liu, J.; Riekehr, S.; Schell, N.; Huber, N.; Kashaev, N.; Mueller, M.; Schreyer, A. (2017)
In: Materials Science Forum, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII, Vol. 905, 114 - 119. - ArticleThe weld interface for friction spot welded 5052 aluminium alloyTier, M.D.; Rosendo, T.S.; Mazzaferro, J.A.Mazzaferro, C.P.; dos Santos, J.F.; Strohaecker, T.R. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 90, 1-4, 267 - 276. - ArticleInfluence of Rotational Speed in the Friction Surfacing of Titanium Grade 1 on Ti-6Al-4VLopes do Vale, N.; Fitseva, V.; Hanke, S.; Urtiga Filho, S.L.; dos Santos, J.F. (2017)
In: Materials Research : Revista Brasileira de Materiais , Vol. 20, 2, 830 - 835. - ArticleThe stiffness and strength of metamaterials based on the inverse opal architecturedo Rosario, J.J.; Berger, J.B.; Lilleodden, E.T.; McMeeking, R.M.; Schneider, G.A. (2017)
In: Extreme Mechanics Letters, Vol. 12, 86 - 96. - ArticleNanoporous Metals with Structural Hierarchy: A ReviewJuarez, T.; Biener, J.; Weissmueller, J.; Hodge, A.M. (2017)
In: Advanced Engineering Materials, Vol. 19, 12, 1700389. - ArticlePlastic Poisson’s Ratio of Nanoporous Metals: A Macroscopic Signature of Tension–Compression Asymmetry at the NanoscaleLuehrs, L.; Zandersons, B.; Huber, N.; Weissmueller, J. (2017)
In: Nano Letters, Vol. 17, 10, 6258 - 6266. - ArticleSemiordered Hierarchical Metallic Network for Fast and Large Charge-Induced StrainCheng, C.; Luehrs, L.; Krekeler, T.; Ritter, M.; Weissmueller, J. (2017)
In: Nano Letters, Vol. 17, 8, 4774 - 4780. - ArticleNanoporous Gold by Alloy Corrosion: Method-Structure-Property RelationshipsGraf, M.; Roschning, B.; Weissmueller, J. (2017)
In: Journal of the Electrochemical Society, Vol. 164, 4, C194 - C200. - ArticleElectrochemical tuning of the optical properties of nanoporous goldJalas, D.; Shao, L.-H.; Canchi, R.; Okuma, T.; Lang, S.; Petrov, A.; Weissmueller, J.; Eich, M. (2017)
In: Scientific Reports, Vol. 7, 44139. - ArticleElectrocatalytic methanol oxidation with nanoporous gold: microstructure and selectivityGraf, M.; Haensch, M.; Carstens, J.; Wittstock, G.; Weissmueller, J. (2017)
In: Nanoscale, Vol. 9, 45, 17839 - 17848. - ArticleA new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloyHuang, Y.; Lv, Z.; Wan, L.; Shen, J.; dos Santos, J.F. (2017)
In: Materials Letters, Vol. 207, 172 - 175. - ArticleInfluence of the microstructure on effective mechanical properties of carbon nanotube compositesDruecker, S.; Wilmers, J.; Bargmann, S. (2017)
In: Coupled Systems Mechanics, Vol. 6, 1, 1 - 15. - ArticleActuation by hydrogen electrosorption in hierarchical nanoporous palladium Shi, S.; Markmann, J.; Weissmueller, J. (2017)
In: Philosophical Magazine, Vol. 97, 19, 1571 - 1587. - ArticleTemperature dependence of plastic instability in Al alloys: A nanoindentation studyOvri, H.; Lilleodden, E.T. (2017)
In: Materials and Design, Vol. 125, 69 - 75. - ArticleX-Ray Studies of Nanoporous Gold: Powder Diffraction by Large Crystals with Small HolesGraf, M.; Ngo, B.-N.D.; Weissmueller, J.; Markmann, J. (2017)
In: Arxiv.org, Condensed Matter, Materials Science, 1708.07789. - ArticleMicrostructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot weldingReimann, M.; Goebel, J.; dos Santos, J.F. (2017)
In: Materials and Design, Vol. 132, 283 - 294. - ArticleA nanoporous gold-polypyrrole hybrid nanomaterial for actuationWang, K.; Stenner, C.; Weissmueller, J. (2017)
In: Sensors and Actuators B, Vol. 248, 622 - 629. - ArticleHydrogen embrittlement under cathodic protection of friction stir welded UNS S32760 super duplex stainless steelPohl Meinhardt, C.; Scheid, A.; dos Santos, J.F.; Bergmann, L.A.; Borges, Favaro, M.; Fortis Kwietniewski, C.E. (2017)
In: Materials Science and Engineering A, Vol. 706, 48 - 56. - ArticleFriction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performanceProenca, B.C.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2017)
In: Welding International, Vol. 31, 7, 509 - 518. - ArticleOn the impact of capillarity for strength at the nanoscaleMameka, N.; Markmann, J.; Weissmueller, J. (2017)
In: Nature Communications, Vol. 8, 1976. - ArticleStudy of process/structure/property relationships in probeless friction stir spot welded AA2198 Al-Li alloyChu, Q.; Li, W.Y.; Yang, X.W.; Shen, J.J.; Li, Y.B.; Wang, W.B. (2017)
In: Welding in the World, Vol. 61, 2, 291 - 298. - ArticleFrische Forschung - LASERSTRAHLSCHWEISSEN vON HOCHLEGIERTEN ALUMINIUM-ZINK-LEGIERUNGENEnz, J. (2017)
In: Laser Community - Das Laser-Magazin von TRUMPF, Vol. 25, 19. - ArticleInfluence of Porosity on the High Cycle Fatigue Behaviour of Laser Beam Welded Ti-6Al-4V Butt JointsFomin, F.; Kashaev, N. (2017)
In: Procedia Structural Integrity , Vol. 7, 415 - 422. - ArticleEffect of nodal mass on macroscopic mechanical properties of nanoporous metalsJiao, J.; Huber, N. (2017)
In: International Journal of Mechanical Sciences, Vol. 134, 234 - 243.
2016
- ArticleThermomechanical formulation of ductile damage coupled to nonlinear isotropic hardening and multiplicative viscoplasticitySoyarslan, C.; Bargmann, S. (2016)
In: Journal of the Mechanics and Physics of Solids, Vol. 91, 334 - 358. - ArticleAnisotropic constitutive model incorporating multiple damage mechanisms for multiscale simulation of dental enamelMa, S.; Scheider, I.; Bargmann, S. (2016)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 62, 515 - 533. - ArticleInfluence of the Interlayer Film Thickness on the Mechanical Performance of AA2024-T3/CF-PPS Hybrid Joints Produced by Friction Spot Joining - Influencia da Espessura do Filme Polimerico Intermediario na Resistencia Mecanica de Juntas Hibridas de Alumínio 2024-T3 e CF-PPS Produzidas por Uniao Pontual por FriccaoAndre, N.M.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 2 - 15. - ArticleUltrasonic joining: A novel direct-assembly technique for metal-composite hybrid structuresFeistauer, E.E.; Guimaraes, R.P.M.; Ebel, T.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Materials Letters, Vol. 170, 1 - 4. - ArticleInfluence of crystallographic texture on the microstructure, tensile properties and residual stress state of laser-welded titanium jointsMaawad, E.; Gan, W.; Hofmann, M.; Ventzke, V.; Riekehr, S.; Brokmeier, H.-G.; Kashaev, N.; Mueller, M. (2016)
In: Materials and Design, Vol. 101, 137 - 145. - ArticleEffect of Nd:YAG laser beam welding on weld morphology and mechanical properties of Ti–6Al–4V butt joints and T-jointsKashaev, N.; Ventzke, V.; Fomichev, V.; Fomin, F.; Riekehr, S. (2016)
In: Optics and Lasers in Engineering, Vol. 86, 172 - 180. - ArticleContinuum damage modeling and simulation of hierarchical dental enamelMa, S.; Scheider, I.; Bargmann, S. (2016)
In: Modelling and Simulation in Materials Science Engineering, Vol. 24, 4, 045014. - ArticleFriction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanismsAndre, N.M.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Composites / B, Vol. 94, 197 - 208. - ArticleA Thermomechanically Consistent Constitutive Theory for Modeling Micro-Void and/or Micro-Crack Driven Failure in Metals at Finite StrainsSoyarslan, C.; Turtuk, I.C.; Deliktas, B.; Bargmann, S. (2016)
In: International Journal of Applied Mechanics, Vol. 8, 1, 1650009. - ArticleLaser beam welded structures for a regional aircraft: weight, cost and carbon footprint savingsAlexopoulos, N.D.; Gialos, A.A.; Zeimpekis, V.; Velonaki, Z.; Kashaev, N.; Riekehr, S.; Karanika, A. (2016)
In: Journal of Manufacturing Systems, Vol. 39, 38 - 52. - ArticleInfluence of Rotational Speed on the Microstructure and Mechanical Performance of Friction-Riveted Thermosetting Composite Joints - Influencia da Velocidade de Rotacao do Rebite na Microestrutura e no Desempenho Mecanico de Juntas de Composito Termofixo Rebitadas por FriccaoZocoller Borba, N.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 30 - 43. - ArticleKeyhole closure using friction spot welding in aluminum alloy 6061–T6Reimann, M.; Gartner, T.; Suhuddin, U.; Goebel, J.; dos Santos, J.F. (2016)
In: Journal of Materials Processing Technology, Vol. 237, 12 - 18. - ArticleLaser Weldability of High-Strength Al-Zn Alloys and Its Improvement by the Use of an Appropriate Filler MaterialEnz, J.; Riekehr, S.; Ventzke, V.; Huber, N.; Kashaev, N. (2016)
In: Metallurgical and Materials Transactions A, Vol. 47, 6, 2830 - 2841. - ArticleA framework for geometrically non-linear gradient extended crystal plasticity coupled to heat conduction and damageEkh, M.; Bargmann, S. (2016)
In: Multiscale and Multiphysics Mechanics, Vol. 1, 2, 171 - 188. - ArticleNanoporous Gold - Testing Macro-scale Samples to Probe Small-scale Mechanical BehaviorMameka, N.; Wang, K.; Markmann, J.; Lilleodden, E.T.; Weissmueller, J. (2016)
In: Materials Research Letters, Vol. 4, 1, 27 - 36. - ArticleFatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distributionEffertz, P.S.; Infante, V.; Quintino, L.; Suhuddin, U.; Hanke, S.; dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 87, 381 - 390. - ArticleScaling laws of nanoporous gold under uniaxial compression: Effects of structural disorder on the solid fraction, elastic Poisson's ratio, Young's modulus and yield strengthRoschning, B.; Huber, N. (2016)
In: Journal of the Mechanics and Physics of Solids, Vol. 92, 55 - 71. - ArticlePlasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particlesLu, X.; Blawert, C.; Huang, Y.; Ovri, H.; Zheludkevich, M.L.; Kainer, K.U. (2016)
In: Electrochimica Acta, Vol. 187, 20 - 33. - ArticleModeling of fracture in small punch tests for small- and large-scale yielding conditions at various temperaturesSoyarslan, C.; Guelcimen, B.; Bargmann, S.; Haehner, P. (2016)
In: International Journal of Mechanical Sciences, Vol. 106, 266 - 285. - ArticleStructure-property relationships in nanoporous metallic glassesSopu, D.; Soyarslan, C.; Sarac, B.; Bargmann, S.; Stoica, M.; Eckert, J. (2016)
In: Acta Materialia, Vol. 106, 199 - 207. - ArticleProcess parameter optimization in friction spot welding of AA5754 and Ti6Al4V dissimilar joints using response surface methodologyPlaine, A.H.; Gonzalez, A.R.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 85, 5, 1575 - 1583. - ArticleInterface formation and properties of friction spot welded joints of AA5754 and Ti6Al4V alloysPlaine, A.H.; Suhuddin, U.F.H.; Afonso, C.R.M.; Alcantara, N.G.; dos Santos, J.F. (2016)
In: Materials and Design, Vol. 93, 224 - 231. - ArticleVariants of Lemaitre’s damage model and their use in formability prediction of metallic materialsSoyarslan, C.; Richter, H.; Bargmann, S. (2016)
In: Mechanics of Materials, Vol. 92, 58 - 79. - ArticleMaterials based design of structures: computational modeling of the mechanical behavior of gold-polymer nanocompositesBargmann, S.; Soyarslan, C.; Husser, E.; Konchakova, N. (2016)
In: Mechanics of Materials, Vol. 94, 53 - 65. - ArticleFibre laser welding of high-alloyed Al–Zn–Mg–Cu alloysEnz, J.; Riekehr, S.; Ventzke, V.; Huber, N.; Kashaev, N. (2016)
In: Journal of Materials Processing Technology, Vol. 237, 155 - 162. - ArticleMechanism-based modelling of plastic deformation in magnesium alloysSteglich, D.; Tian, X.; Besson, J. (2016)
In: European Journal of Mechanics A, Vol. 55, 289 - 303. - ArticleFinite element damage analysis of an underwater glider–ship collisionDruecker, S.; Steglich, D.; Merckelbach, L.; Werner, A.; Bargmann, S. (2016)
In: Journal of Marine Science and Technology, Vol. 21, 2, 261 - 270. - ArticleElastic and plastic Poisson’s ratios of nanoporous goldLuehrs, L.; Soyarslan, C.; Markmann, J.; Bargmann, S.; Weissmueller, J. (2016)
In: Scripta Materialia, Vol. 110, 65 - 69. - ArticleXPS analysis of the interface between AA2024-T3 / CF-PPS friction spot jointsGoushegir, S.M.; Scharnagl, N.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Surface and Interface Analysis :SIA, Vol. 48, 8, 706 - 711. - ArticleFatigue Crack Growth Behaviour in Friction Stir Welded Aluminium–Lithium Alloy Subjected to Biaxial LoadsRichter-Trummer, V.; Zhang, X.; Irving, P.E.; Pacchione, M.; Beltrao, M.; dos Santos, J.F. (2016)
In: Experimental Techniques, Vol. 40, 3, 921 - 935. - ArticleFatigue behavior of friction spot welds in lap shear specimens of AA5754 and Ti6Al4V alloysPlaine, A.H.; Suhuddin, U.F.H.; Alcantara, N.G.; dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 91, 149 - 157. - ArticleFailure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniquesGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2016)
In: Composites / A, Vol. 81, 121 - 128. - ArticleAutomatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion compositesSchneider, K.; Klusemann, B.; Bargmann, S. (2016)
In: Advances in Engineering Software, Vol. 99, 177 - 188. - ArticlePiezoelectric Gold: Strong Charge-Load Response in a Metal-Based Hybrid NanomaterialStenner, C.; Shao, L.-H.; Mameka, N.; Weissmueller, J. (2016)
In: Advanced Functional Materials, Vol. 26, 28, 5174 - 5181. - ArticleNanostructured MWCNT/Polypyrrole Actuators with Anisotropic Strain ResponseSchnoor, T.I.W.; Vainio, U.; Shao, l.-H.; Lilleodden, E.T.; Mueller, M.; Schreyer, A.; Schulte, K.; Fiedler, B. (2016)
In: Advanced Engineering Materials, Vol. 18, 4, 597 - 607. - ArticlePhase Transformations During Solidification of a Laser-Beam-Welded TiAl Alloy—An In Situ Synchrotron Study Liu, J.; Staron, P.; Riekehr, S.; Stark, A.; Schell, N.; Huber, N.; Schreyer, A.; Mueller, M.; Kashaev, N. (2016)
In: Metallurgical and Materials Transactions A, Vol. 47, 12, 5761 - 5770. - ArticleFriction Stir Welding of Shipbuilding Steel with PrimerAzevedo, J.; Quintino, L.; Infante, V.; Miranda, R.M.; dos Santos, J.F. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 16 - 29. - ArticleImprovement of friction spot welding (FSpW) to join polyamide 6 and polyamide 66/carbon fibre laminateGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2016)
In: Welding International, Vol. 30, 4, 247 - 254. - ArticleMaterial-flow behavior during friction-stir welding of 6082-T6 aluminum alloyHuang, Y.; Wang, Y.; Wan, L.; Liu, H.; Shen, J.; dos Santos, J.F.; Zhou, L.; Feng, J. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 87, 1, 1115 - 1123. - ArticleThe role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatingsFitseva, V.; Hanke, S.; dos Santos, J.F.; Stemmer, P.; Gleising, B. (2016)
In: Materials and Design, Vol. 110, 112 - 123. - ArticleElectrochemically Tunable Resistance of Nanoporous Platinum Produced by DealloyingSteyskal, E.-M.; Qi, Z.; Poelt, P.; Albu, M.; Weissmueller, J.; Wuerschum, R. (2016)
In: Langmuir, Vol. 32, 31, 7757 - 7764. - ArticleKink formation and concomitant twin nucleation in Mg–YWang, L.; Sabisch, J.; Lilleodden, E.T. (2016)
In: Scripta Materialia, Vol. 111, 68 - 71. - ArticleMechanical and Corrosion Behavior of New Generation Ti-45Nb Porous Alloys Implant DevicesPrashanth, K.G.; Zhuravleva, K.; Okulov, I.V.; Calin, M.; Eckert, J.; Gebert, A. (2016)
In: Technologies, Vol. 4, 4, 33. - ArticleFourth-order strain-gradient phase mixture model for nanocrystalline fcc materialsKlusemann, B.; Bargmann, S.; Estrin, Y. (2016)
In: Modelling and Simulation in Materials Science Engineering, Vol. 24, 8, 085016. - ArticleLurie solution for spherical particle and spring layer model of interphases: Its application in analysis of effective properties of compositesNazarenko, L.; Bargmann, S.; Stolarski, H. (2016)
In: Mechanics of Materials, Vol. 96, 39 - 52. - ArticleEffect of elasto-plastic material behaviour on determination of residual stress profiles using the hole drilling methodChupakhin, S.; Kashaev, N.; Huber, N. (2016)
In: Journal of Strain Analysis for Engineering Design, Vol. 51, 8, 572 - 581. - ArticlePhase Transformation and Residual Stress in a Laser Beam Spot-Welded TiAl-Based AlloyLiu, J.; Staron, P.; Riekehr, S.; Stark, A.; Schell, N.; Huber, N.; Schreyer, A.; Mueller, M.; Kashaev, N. (2016)
In: Metallurgical and Materials Transactions A, Vol. 47, 12, 5750 - 5760. - ArticleThe effect of yield surface curvature change by cross hardening on forming limit diagrams of sheetsSoyarslan, C.; Klusemann, B.; Bargmann, S. (2016)
In: International Journal of Mechanical Sciences, Vol. 117, 53 - 66. - ArticlePerformance of friction stir welded tailor welded blanks in AA5059 and AA6082 alloys for marine applicationsFeistauer, E.; Bergmann, L.; dos Santos, J.F. (2016)
In: Key Engineering Materials, Aluminium Constructions: Sustainability, Durability and Structural Advantages, Vol. 710, 91 - 96. - ArticleGlobal and local mechanical properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloyWang, F.F.; Li, W.Y.; Shen, J.; Zhang, Z.H.; Li, J.L.; dos Santos, J.F. (2016)
In: Science and Technology of Welding and Joining, Vol. 21, 6, 479 - 483. - ArticleOn the feasibility of a friction-based staking joining method for polymer–metal hybrid structuresAbibe, A.B.; Sonego, M.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2016)
In: Materials and Design, Vol. 92, 632 - 642. - ArticleFriction spot joining (FSpJ) of aluminum-CFRP hybrid structuresGoushegir, S.M. (2016)
In: Welding in the World, Vol. 60, 6, 1073 - 1093. - ArticleNanoporous gold: 3D structural analyses of representative volumes and their implications on scaling relations of mechanical behaviourHu, K.; Ziehmer, M.; Wang, K.; Lilleodden, E.T. (2016)
In: Philosophical Magazine, Vol. 96, 32-34, 3322 - 3335. - ArticleTexture-based forming limit prediction for Mg sheet alloys ZE10 and AZ31Steglich, D.; Jeong, Y. (2016)
In: International Journal of Mechanical Sciences, Vol. 117, 102 - 114. - ArticleThermoelastic modelling of the skin at finite deformationsMcBride, A.; Bargmann, S.; Pond, D.; Limbert, G. (2016)
In: Journal of Thermal Biology, Vol. 62 B, 201 - 209. - ArticleModeling of microstructural pattern formation in crystal plasticityKlusemann, B. (2016)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 16, 1, 361 - 362. - ArticleProcess Optimization of Dual-Laser Beam Welding of Advanced Al-Li Alloys Through Hot Cracking Susceptibility ModelingTian, Y.; Robson, J.D.; Riekehr, S.; Kashaev, N.; Wang, L.; Lowe, T.; Karanika, A. (2016)
In: Metallurgical and Materials Transactions A, Vol. 47, 7, 3533 - 3544. - ArticleA principle curvatures analysis of the isothermal evolution of nanoporous gold: Quantifying the characteristic length-scalesZiehmer, M.; Hu, K.; Wang, K.; Lilleodden, E.T. (2016)
In: Acta Materialia, Vol. 120, 24 - 31.
2015
- ArticleNew insights into plastic instability in precipitation strengthened Al–Li alloysOvri, H.; Lilleodden, E.T. (2015)
In: Acta Materialia, Vol. 89, 88 - 97. - ArticleElectrocapillary coupling at rough surfacesDeng, Q.; Gosslar, D.-H.; Smetanin, M.; Weissmueller, J. (2015)
In: Physical Chemistry Chemical Physics, Vol. 17, 17, 11725 - 11731. - ArticlePrediction of Crashworthiness for extruded Magnesium MaterialsSteglich, D.; Tian, X. (2015)
In: Key Engineering Materials, Material Forming ESAFORM 2015, Vol. 651-653, 1009 - 1014. - ArticleInfluence of external cooling configuration on friction surfacing of AA6082 T6 over AA2024 T351Krohn, H.; Hanke, S.; Beyer, M.; dos Santos, J.F. (2015)
In: Manufacturing Letters, Vol. 5, 17 - 20. - ArticleExperimental and Numerical Formability Analysis of AZ31 and ZE10 SheetsSteglich, D.; Mekonen, M.N.; Bohlen, J. (2015)
In: Materials Today: Proceedings, Vol. 2, S1, S 125 - S 130. - ArticleInfluence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap jointsGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 83, 431 - 442. - ArticleCrystallographic Texture in Bobbin Tool Friction-Stir-Welded AluminumShen, J.; Wang, F.; Suhuddin, U.F.H.; Hu, S.; Li, W.; dos Santos, J.F. (2015)
In: Metallurgical and Materials Transactions A, Vol. 46, 7, 2809 - 2813. - ArticleAnomalous compliance and early yielding of nanoporous goldNgo, B.-N.D.; Stukowski, A.; Mameka, N.; Markmann, J.; Albe, K.; Weissmueller, J. (2015)
In: Acta Materialia, Vol. 93, 144 - 155. - ArticleMicrostructural influences on strengthening in a naturally aged and overaged Al-Cu-Li-Mg based alloyOvri, H.; Jaegle, E.A.; Stark, A.; Lilleodden, E.T. (2015)
In: Materials Science and Engineering A, Vol. 637, 162 - 169. - ArticleTwin-roll Casting after Intensive Melt Shearing and Subsequent Rolling of an AM30 Magnesium Alloy with Addition of CaO and SiCDieringa, H.; Das, S.; Eskin, D.; Fan, Z.; Katsarou, L.; Horstmann, M.; Kurz, G.; Mendis, C.; Hort, N.; Kainer, K.U. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 35 - 40. - ArticleAssessment of alternative joining techniques for Ti–6Al–4V/CFRP hybrid joints regarding tensile and fatigue strengthKashaev, N.; Ventzke, V.; Riekehr, S.; Dorn, F.; Horstmann, M. (2015)
In: Materials and Design, Vol. 81, 73 - 81. - ArticleEnergy-equivalent inhomogeneity approach to analysis of effective properties of nanomaterials with stochastic structureNazarenko, L.; Bargmann, S.; Stolarski, H. (2015)
In: International Journal of Solids and Structures, Vol. 59, 183 - 197. - ArticleSingle-sided laser beam welding of a dissimilar AA2024–AA7050 T-jointEnz, J.; Khomenko, V.; Riekehr, S.; Ventzke, V.; Huber, N.; Kashaev, N. (2015)
In: Materials and Design, Vol. 76, 110 - 116. - ArticleApplication of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samplesCoratella, S.; Sticchi, M.; Toparli, M.B.; Fitzpatrick, M.E.; Kashaev, N. (2015)
In: Surface and Coatings Technology, Vol. 273, 39 - 49. - ArticleMechanical characterization of oligo(ethylene glycol)-based hydrogels by dynamic nanoindentation experimentsGuglielmi, P.O.; Herbert, E.G.; Tartivel, L.; Behl, M.; Lendlein, A.; Huber, N.; Lilleodden, E.T. (2015)
In: Journal of the Mechanical Behavior of Biomedical Materials, Vol. 46, 1 - 10. - ArticleA continuum mechanical model for the description of solvent induced swelling in polymeric glasses: thermomechanics coupled with diffusionWilmers, J.; Bargmann, S. (2015)
In: European Journal of Mechanics A, Vol. 53, 10 - 18. - ArticleThe plastic yield and flow behavior in metallic glassesThamburaja, P.; Klusemann, B.; Adibi, S.; Bargmann, S. (2015)
In: Applied Physics Letters, Vol. 106, 5, 051903. - ArticleDamage modeling of small-scale experiments on dental enamel with hierarchical microstructureScheider, I.; Xiao, T.; Yilmaz, E.; Schneider, G.A.; Huber, N.; Bargmann, S. (2015)
In: Acta Biomaterialia, Vol. 15, 244 - 253. - ArticleCharacterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple ShearGerstein, G.; Klusemann, B.; Bargmann, S.; Schaper, M. (2015)
In: Materials, Vol. 8, 1, 285 - 301. - ArticleExperimental and numerical crushing analyses of thin-walled magnesium profilesSteglich, D.; Tian, X.; Bohlen, J.; Riekehr, S.; Kashaev, N.; Kainer, K.U.; Huber, N. (2015)
In: International Journal of Crashworthiness, Vol. 20, 2, 177 - 190. - ArticleNumerical prediction of the stress–strain response of a lamellar GammaTiAl polycrystal using a two-scale modelling approachCornec, A.; Kabir, M.R.; Huber, N. (2015)
In: Materials Science and Engineering A, Vol. 620, 273 - 285. - ArticleFriction Riveting of Aluminum Alloy 6056 T6 and Polyamide 6: Role of the Rotation Speed on the Formation of the Anchoring Zone and Mechanical Performance - Rebitagem por Friccao (“FricRiveting”) de Liga de Alumínio 6056 T6 e Poliamida 6: Influencia da Velocidade de Rotacao na Formacao da Zona de Ancoragem e no Desempenho MecanicoProenca, B.C.; Blaga, L.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 489 - 500. - ArticleUltrafine Sanding Paper: A Simple Tool for Creating Small ParticlesSchaefer, H.; Hess, C.; Tobergte, H.; Volf, A.; Ichilmann, S.; Eickmeier, H.; Voss, B.; Kashaev, N.; Nordmann, J.; Akram, W.; Hartmann-Azanza, B.; Steinhart, M. (2015)
In: Small, Vol. 11, 8, 931 - 935. - ArticleFriction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strengthEsteves, J.V.; Goushegir, S.M.; dos Santos, J.F.; Canto, L.B.; Hage, E.Jr.; Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 66 B, 437 - 445. - ArticleReview of Residual Stress Modification Techniques for Extending the Fatigue Life of Metallic Aircraft ComponentsSticchi, M.; Schnubel, D.; Kashaev, N.; Huber, N. (2015)
In: Applied Mechanics Reviews, Vol. 67, 1, 010801. - ArticleLode Parameter Dependence and Quasi-Unilateral Effects in Continuum Damage Mechanics: Models and Applications in Metal FormingSoyarslan, C.; Richter, H.; Bargmann, S. (2015)
In: Key Engineering Materials, Material Forming ESAFORM 2015, Vol. 651-653, 187 - 192. - ArticlePorous Gold with a Nested-Network Architecture and Ultrafine StructureQi, Z.; Vainio, U.; Kornowski, A.; Ritter, M.; Weller, H.; Jin, H.; Weissmueller, J. (2015)
In: Advanced Functional Materials, Vol. 25, 17, 2530 - 2536. - ArticleNanoporous-gold-based composites: toward tensile ductilityWang, K.; Kobler, A.; Kuebel, C.; jelitto, H.; Schneider, G.; Weissmueller, J. (2015)
In: NPG Asia Materials, Vol. 7, e187. - ArticleA directional modification of the Levkovitch–Svendsen cross-hardening model based on the stress deviatorSoyarslan, C.; Klusemann, B.; Bargmann, S. (2015)
In: Mechanics of Materials, Vol. 86, 21 - 30. - ArticleMicrostructure of AISI 410S Ferritic Stainless Steel and AISI 304L Austenitic Stainless Steel Dissimilar Weld Joined by FSW Process - Microestrutura de uma Solda Dissimilar entre o Aço Inoxidável Ferrítico AISI 410S e o Aço Inoxidável Austenítico AISI 304L Soldado pelo Processo FSWAndrade, T.C.; Silva, C.C.; Miranda, H.C.de; Motta, M.F.; Farias, J.P.; Bergman, L.A.; dos Santos, J.F. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 467 - 478. - ArticleSelf‐Assembled Ultra High Strength, Ultra Stiff Mechanical Metamaterials Based on Inverse Opalsdo Rosário, J.; Lilleodden, E.; Waleczek, M.; Kubin, R.; Petrov, A.; Dyachenko, P.; Sabisch, J.; Nielsch, K.; Huber, N.; Eich, M.; Schneider, G. (2015)
In: Advanced Engineering Materials, Vol. 17, 10, 1420 - 1424. - ArticleInfluence of the geometry on the fatigue performance of crenellated fuselage panelsLu, J.; Huber, N.; Kashaev, N. (2015)
In: Ciencia & Tecnologia dos Materiais, Vol. 27, 2, 100 - 107. - ArticleA computational investigation of a model of single-crystal gradient thermoplasticity that accounts for the stored energy of cold work and thermal annealingMcBride, A.; Bargmann, S.; Reddy, B.D. (2015)
In: Computational Mechanics, Vol. 55, 4, 755 - 769. - ArticleLaser Weldbability of different Al-Zn alloys and its improvementEnz, J.; Riekehr, S.; Ventzke, V.; Kashaev, N. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 389 - 394. - ArticleThe Electro-Chemo-Mechanical Coupling in Lithium Alloy Electrodes and Its OriginsKitzler, T.; Maawad, E.; Toebbens, D.M.; Ziehmer, M.; Markmann, J. (2015)
In: Journal of the Electrochemical Society, Vol. 162, 14, A2684 - A2691. - ArticleCrenellation Patterns for Fatigue Crack Retardation in Fuselage Panels Optimized via Genetic AlgorithmLu, J.; Kashaev, N.; Huber, N. (2015)
In: Procedia Engineering, Vol. 114, 248 - 254. - ArticleIn situ study of phase transformations during laser-beam welding of a TiAl alloy for grain refinement and mechanical property optimizationLiu, J.; Staron, P.; Riekehr, S.; Stark, A.; Schell, N.; Huber, N.; Schreyer, A.; Mueller, M.; Kashaev, N. (2015)
In: Intermetallics, Vol. 62, 27 - 35. - ArticleContinuum modeling of material interfaces and surfaces based on molecular statics computationsSievers, C.; Mosler, J. (2015)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 15, 1, 359 - 360. - ArticleLess Noble or More Noble: How Strain Affects the Binding of Oxygen on GoldDeng, Q.; Gopal, V, Weissmueller, J. (2015)
In: Angewandte Chemie, Vol. 127, 44, 13173 - 13177. - ArticleThe optimization of friction spot welding process parameters in AA6181-T4 and Ti6Al4V dissimilar jointsPlaine, A.H.; Gonzalez, A.R.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2015)
In: Materials and Design, Vol. 83, 36 - 41. - ArticleComputational investigation of multi-axial damage modeling for porous sintered metals with experimental verification Ma, S.; Yuan, H. (2015)
In: Engineering Fracture Mechanics, Vol. 149, 89 - 110. - ArticleFriction spot welding of carbon fiber-reinforced polyamide 66 laminateGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio-Filho, S.T. (2015)
In: Materials Letters, Vol. 159, 509 - 509. - ArticleSliding wear behaviour of a Cr-base alloy after microstructure alterations induced by friction surfacingHanke, S.; Fischer, A.; dos Santos, J.F. (2015)
In: Wear , Vol. 338-339, 332 - 338. - ArticleFriction Spot Welding of Similar AA5754 to AA5754 Aluminum Alloys and Dissimilar AA5754 Aluminum to AZ31 Magnesium AlloysSuhuddin, U.; Piccolo, D.; Fischer, V.; dos Santos, J.F. (2015)
In: Advanced Materials Research, Advanced Materials Research and Production, Vol. 1112, 485 - 488. - ArticleEffect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al-Li alloyWang, F.F.; Li, W.Y.; Shen, J.J.; Hu, S.Y.; Li, J.L.; dos Santos, J.F.; Huber, N. (2015)
In: Materials and Design, Vol. 86, 933 - 940. - ArticleMicrostructure and mechanical performance of metal-composite hybrid joints produced by FricRivetingAltmeyer, J.; Suhuddin, U.F.H.; dos Santos, J.F.; Amancio-Filho, S.T. (2015)
In: Composites / B, Vol. 81, 130 - 140. - ArticleFriction surfacing of Ti–6Al–4V: Process characteristics and deposition behaviour at various rotational speedsFitseva, V.; Krohn, H.; Hanke, S.; dos Santos, J.F. (2015)
In: Surface and Coatings Technology, Vol. 278, 56 - 63. - ArticleA parametric study of laser spot size and coverage on the laser shock peening induced residual stress in thin aluminium samplesSticchi, M.; Staron, P.; Sano, Y.; Meixer, M.; Klaus, M.; Rebelo-Kornmeier, J.; Huber, N.; Kashaev, N. (2015)
In: The Journal of Engineering, Vol. 2015, 13, 97 - 105. - ArticleThermomechanical modeling of polysynthetically twinned TiAl crystalsButzke, J.-E.; Bargmann, S. (2015)
In: Philosophical Magazine, Vol. 95, 24, 2607 - 2626. - ArticleMicrostructure and Mechanical Properties of Laser Beam Welded Joints between Fine-Grained and Standard Ti-6Al-4V Sheets Subjected to Superplastic FormingKashaev, N.; Ventzke, V.; Horstmann, M.; Riekehr, S.; Yashin, G.; Stutz, L.; Beck, W. (2015)
In: Advanced Engineering Materials, Vol. 17, 3, 374 - 382. - ArticleMechanical Properties of Fibre Laser Welded AZ31B Sheets and their Dependence on the Spot-SizeRiekehr, S.; Ravasi, R.; Enz, J.; Ventzke, V.; Kashaev, N. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 298 - 304. - ArticleChallenges and Solutions in the Development of Magnesium Sheet for Sustainable Vehicle ConceptsKainer, K.U.; Hoppe, R.; Bohlen, J.; Kurz, G.; Yi, S.; Letzig, D. (2015)
In: Materials Science Forum, Light Metals Technology 2015, Vol. 828-829, 15 - 22. - ArticleOxidized Mild Steel S235: An Efficient Anode for Electrocatalytically Initiated Water SplittingSchaefer, H.; Kuepper, K.; Wollschlaeger, J.; Kashaev, N.; Hardege, J.; Walder, L.; Beladi-Mousavi, S.M.; Hartmann-Azanza, B.; Steinhart, M.; Sadaf, S.; Dorn, F. (2015)
In: ChemSusChem, Vol. 8, 18, 3099 - 3110.
2014
- ArticleCharacterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu) aluminum alloysLarrayoz Izcara, X.; Guirao Blank, A.; Pyczak, F.; Staron, P.; Schumann, S.; Huber, N. (2014)
In: Materials Science and Engineering A, Vol. 610, 46 - 53. - ArticleProzessentwicklung zum Rotationsreibschweißen der Gamma-TiAl-Feingusslegierung Ti-47Al-3.5(Mn+Cr+Nb)-0.8(B+Si) mit Ti6Al4V: Teil: 2 - The Development of the Rotational Friction Welding Process for the Welding of Gamma-TiAl-Casting Alloy Ti-47Al-3.5(Mn+Cr+Nb)-0.8(B+Si) to Ti6Al4V: Part: 2Ventzke, V.; Riekehr, S.; Horstmann, M.; Kashaev, N.; Brokmeier, H.-G.; Huber, N. (2014)
In: Practical Metallography - Praktische Metallographie, Vol. 51, 6, 401 - 424. - ArticleEutectic structures in friction spot welding joint of aluminum alloy to copperShen, J.; Suhuddin, U.F.H.; Barbosa, M.E.B.; dos Santos, J.F. (2014)
In: Applied Physics Letters, Vol. 104, 19, 191901. - ArticleMechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applicationsFeistauer, E.E.; Bergmann, L.A.; Barreto, L.S.; dos Santos, J.F. (2014)
In: Materials and Design, 323 - 332. - ArticleElectrical stiffness modulation—confirming the impact of surface excess elasticity on the mechanics of nanomaterialsMameka, N.; Markmann, J.; Jin, H.-J.; Weissmueller, J. (2014)
In: Acta Materialia, Vol. 76, 272 - 280. - ArticleIncreased Room Temperature Formability of Mg AZ31 by High Speed Friction Stir ProcessingHuetsch, L.L.; Huetsch, J.; Herzberg, K.; dos Santos, J.F.; Huber, N. (2014)
In: Materials and Design, Vol. 54, 980 - 988. - ArticleFatigue, Fatigue Crack Propagation and Mechanical Fracture Behaviour of Laser Beam-Welded AZ31 Magnesium SheetsKashaev, N.; Riekehr, S.; Horstmann, M.; Ventzke, V. (2014)
In: Materials Science Forum, Thermec 2013, Vol. 783-786, 2310 - 2315. - ArticleMechanical Testing of Thin Sheet Magnesium Alloys in Biaxial Tension and Uniaxial CompressionSteglich, D.; Tian, X.; Bohlen, J.; Kuwabara, T. (2014)
In: Experimental Mechanics, Vol. 54, 7, 1247 - 1258. - ArticleEffect of the friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone jointsAltmeyer, J.; dos Santos, J.F.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 60, 164 - 176. - ArticleComputational modeling of intrinsically induced strain gradients during compression of c-axis-oriented magnesium single crystalHusser, E.; Lilleodden, E.T.; Bargmann, S. (2014)
In: Acta Materialia, Vol. 71, 206 - 219. - ArticleProzessentwicklung zum Rotationsreibschweißen der Gamma-TiAl-Feingusslegierung Ti-47Al-3.5(Mn+Cr+Nb)-0.8(B+Si) mit Ti6Al4V: Teil: 1 - The Development of the Rotational Friction Welding Process for the Welding of Gamma-TiAl-Casting Alloy Ti-47Al-3.5(Mn+Cr+Nb)-0.8(B+Si) to Ti6Al4V: Part: 1Ventzke, V.; Riekehr, S.; Horstmann, M.; Kashaev, N.; Brokmeier, H.-G.; Huber, N. (2014)
In: Practical Metallography - Praktische Metallographie, Vol. 51, 5, 321 - 352. - ArticleLaser Welding of High-Strength Aluminium Alloys for the Sheet Metal Forming ProcessEnz, J.; Riekehr, S.; Ventzke, V.; Sotirov, N.; Kashaev, N. (2014)
In: Procedia CIRP, Vol. 18, 203 - 208. - ArticleSimulation of non-classical diffusion in polymersWilmers, J.; Bargmann, S. (2014)
In: Heat and Mass Transfer, Vol. 50, 11, 1543 - 1552. - ArticleCrack Mitigation during Dealloying of Au25Cu75Zhong, Y.; Markmann, J.; Jin, H.-J.; Ivanisenko, Y.; Kurmanaeva, L.; Weissmueller, J. (2014)
In: Advanced Engineering Materials, Vol. 16, 4, 389 - 398. - ArticleHybrid Friction Diffusion Bonding of Aluminium Tube-to-Tube-Sheet Connections in Coil-Wound Heat ExchangersDethlefs, A.; Roos, A.; dos Santos, J.F.; Wimmer, G. (2014)
In: Materials and Design, Vol. 60, 7 - 12. - ArticleFriction surfacing - A reviewGandra, J.; Krohn, H.; Miranda, R.M.; Vilaca, P.; Quintino, L.; dos Santos, J.F. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 5, 1062 - 1093. - ArticleThe influence of focused-ion beam preparation technique on microcompression investigations: Lathe vs. annular millingHuetsch, J.; Lilleodden, E.T. (2014)
In: Scripta Materialia, Vol. 77, 49 - 51. - ArticleProcessing of Magnesium Porous Structures by Infiltration Casting for Biomedical ApplicationsTrinidad, J.; Marco, I.; Arruebarrena, G.; Wendt, J.; Letzig, D.; Saenz de Argandona, E.; Goodall, R. (2014)
In: Advanced Engineering Materials, Vol. 16, 2, 241 - 247. - ArticleInfluence of Interfaces on Effective Properties of Nanomaterials with Stochastically Distributed Spherical InclusionsNazarenko, L.; Bargmann, S.; Stolarski, H. (2014)
In: International Journal of Solids and Structures, Vol. 51, 5, 954 - 966. - ArticleA combined experimental-numerical approach for elasto-plastic fracture of individual grain boundariesKupka, D.; Huber, N.; Lilleodden, E.T. (2014)
In: Journal of the Mechanics and Physics of Solids, Vol. 64, 455 - 467. - ArticleFatigue and Fatigue Crack Propagation of Laser Beam-Welded AA2198 Joints and Integral StructuresKashaev, N.; Chupakhin, S.; Enz, J.; Ventzke, V.; Groth, A.; Horstmann, M.; Riekehr, S. (2014)
In: Advanced Materials Research, 11th International Fatigue Congress, Vol. 891-892, 1457 - 1462. - ArticleScaling laws of nanoporous metals under uniaxial compressionHuber, N.; Viswanath, R.N.; Mameka, N.; Markmann, J.; Weissmueller, J. (2014)
In: Acta Materialia, Vol. 67, 252 - 265. - ArticleMechanical modulation of reaction rates in electrocatalysisDeng, Q.; Smetanin, M.; Weissmueller, J. (2014)
In: Journal of Catalysis, Vol. 309, 351 - 361. - ArticleContinuum mechanical modeling of laser-pulsed heating in polycrystals: A multi-physics problem of coupling diffusion, mechanics, and thermal wavesBargmann, S.; Favata, A. (2014)
In: Zeitschrift fuer angewandte Mathematik und Mechanik : ZAMM, Vol. 94, 6, 487 - 498. - ArticleSwitchable imbibition in nanoporous goldXue, Y.; Markmann, J.; Duan, H.; Weissmueller, J.; Huber, P. (2014)
In: Nature Communications, Vol. 5, 4237. - ArticleA Revised Exposition of the GreenNaghdi Theory of Heat PropagationBargmann, S.; Favata, A.; Podio-Guidugli, P. (2014)
In: Journal of Elasticity, Vol. 114, 2, 143 - 154. - ArticleMicrostructure and mechanical properties of friction spot welds of dissimilar AA5754 Al and AZ31 Mg alloysSuhuddin, U.; Fischer, V.; Kroeff, F.; dos Santos, J.F. (2014)
In: Materials Science and Engineering A, Vol. 590, 384 - 389. - ArticleEffect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Laser Beam Welded TiAl-based AlloyLiu, J.; Ventzke, V.; Staron, P.; Schell, N.; Kashaev, N.; Huber, N. (2014)
In: Metallurgical and Materials Transactions A, Vol. 45, 1, 16 - 28. - ArticleComputational modelling of submicron-sized metallic glassesBargmann, S.; Xiao, T.; Klusemann, B. (2014)
In: Philosophical Magazine, Vol. 94, 1, 1 - 19. - ArticleEinseitiges Nd:YAG-Laserstrahlschweissen zum Herstellen von T-Stossverbindungen aus Aluminiumlegierungen fuer den FlugzeugbauVentzke, V.; Riekehr, S.; Horstmann, M.; Haack, P.; Kashaev, N. (2014)
In: Schweissen und Schneiden, Vol. 66, 1-2, 22 - 26. - ArticleMaterials by design: An experimental and computational investigation on the microanatomy arrangement of porous metallic glassesSarac, B.; Klusemann, B.; Xiao, T.; Bargmann, S. (2014)
In: Acta Materialia, Vol. 77, 411 - 422. - ArticleA computational study of a model of single-crystal strain-gradient viscoplasticity with an interactive hardening relationBargmann, S.; Reddy, B.D.; Klusemann, B. (2014)
In: International Journal of Solids and Structures, Vol. 51, 15-16, 2754 - 2764. - ArticleMicrostructure and interface characterization of dissimilar friction stir welded lap joints between Ti–6Al–4V and AISI 304Campo, K.N.; Campanelli, L.C.; Bergmann, L.; dos Santos, J.F.; Bolfarini, C. (2014)
In: Materials and Design, Vol. 56, 139 - 145. - ArticleApplication of a Gradient Crystal Plasticity Model to Numerical Analysis of Metal Part of Nanoporous Metal – Polymer CompositesKonchakova, N.; Bargmann, S. (2014)
In: Procedia Engineering, Vol. 81, 1348 - 1353. - ArticleA novel homogenization method for phase field approaches based on partial rank-one relaxationMosler, J.; Shchyglo, O.; Montazer Hojjat, H. (2014)
In: Journal of the Mechanics and Physics of Solids, Vol. 68, 251 - 266. - ArticleOn the thermodynamically consistent modeling of distortional hardening: A novel generalized frameworkShi, B.; Bartels, A.; Mosler, J. (2014)
In: International Journal of Plasticity, Vol. 63, 170 - 182. - ArticleElectrocapillary Coupling during ElectrosorptionDeng, Q.; Weissmueller, J. (2014)
In: Langmuir, Vol. 30, 34, 10522 - 10530. - ArticleFriction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performanceGoushegir, S.M.; dos Santos, J.F.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 54, 196 - 206. - ArticleWrinkling of Atomic Planes in Ultrathin Au NanowiresRoy, A.; Kundu, S.; Mueller, K.; Rosenauer, A.; Singh, S.; Pant, P.; Gururajan, M.P.; Kumar, P.; Weissmueller, J.; Singh, A.K.; Ravishankar, N. (2014)
In: Nano Letters, Vol. 14, 8, 4859 - 4866. - ArticleEffective bulk moduli of materials containing stochastically distributed nano-inhomogeneities with surface stressesNazarenko, L.; Bargmann, S. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 537 - 538. - ArticleDual-mixed finite element analysis of crystalline sub-micron goldKonchakova, N.; Husser, E.; Bargmann, S. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 329 - 330. - ArticleNon-local modeling of size effects in amorphous metalsKlusemann, B.; Xiao, T.; Bargmann, S. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 529 - 530. - ArticleModeling of fiber-reinforced PMMA at different scalesDiaz, G.; Mosler, J. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 159 - 160. - ArticleMaterial saving and cost reduction with hot forming of U-shaped titanium part - Materialeinsparung und Kostenreduzierung durch Heissumformung von U-foermigen TitanbauteilenStutz, L.; Beck, W.; Arends, S.; Horstmann, M.; Ventzke, V.; Kashaev, N. (2014)
In: Materialwissenschaft und Werkstofftechnik, Vol. 45, 9, 841 - 846. - ArticleFricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performanceRodrigues, C.F.; Blaga, L.A.; dos Santos, J.F.; Canto, L.B.; Hage, E. Jr.; Amancio-Filho, S.T. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 10, 2029 - 2039. - ArticleInherent and induced anisotropic finite visco-plasticity with applications to the forming of DC06 sheetsBehrouzi, A.; Soyarslan, C.; Klusemann, B.; Bargmann, S. (2014)
In: International Journal of Mechanical Sciences, Vol. 89, 101 - 111. - ArticleStress concentration phenomena in the vicinity of composite plate-doubler junctions by a layerwise analysis approachButzke, J.E.; Mittelstedt, C. (2014)
In: Composite Structures, Vol. 118, 351 - 366. - ArticleImprovement of the Friction Spot Welding (FSpW) to join Polyamide 6 and Polyamide 66/Carbon Fiber Laminate - Aperfeicoamento da Tecnica de Soldagem Pontual por Friccao (FSpW) para Uniao de Poliamida 6 e Laminado de Poliamida 66 com Fibra de CarbonoGoncalves, J.; dos Santos, J.F.; Canto, L.B.; Amancio Filho, S.T. (2014)
In: Soldagem & Inspecao, Vol. 19, 1, 19 - 27. - ArticleFeasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocompositeJunior, W.S.; Handge, U.A.; dos Santos, J.F.; Abetz, V.; Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 64, 246 - 250. - ArticleEffect of Local Laser Surfacing on the Fatigue Crack Propagation Rate of Al-alloy 6056 and its Laser beam WeldQi, F.; Staron, P.; Ventzke, V. (2014)
In: Procedia Materials Science, Vol. 3, 1834 - 1840. - ArticleOne-sided Nd:YAG laser beam welding for the manufacture of T-joints made of aluminium alloys for aircraft constructionVentzke, V.; Riekehr, S.; Horstmann, M.; Haack, P.; Kashaev, N. (2014)
In: Welding and Cutting, Vol. 13, 4, 245 - 249. - ArticleFracture Behavior of a Laser Beam Welded High-strength Al-Zn AlloyEnz, J.; Iwan, H.; Riekehr, S.; Ventzke, V.; Kashaev, N. (2014)
In: Procedia Materials Science, Vol. 3, 1828 - 1833. - ArticleA Damage Mechanics based Evaluation of Dynamic Fracture Resistance in Gas PipelinesScheider, I.; Nonn, A.; Voelling, A.; Mondry, A.; Kalwa, C. (2014)
In: Procedia Materials Science, Vol. 3, 1956 - 1964. - ArticleFriction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRPJunior, W.S.; Emmler, T.; Abetz, C.; Handge, U.A.; dos Santos, J.F.; Amancio-Filho, S.T.; Abetz, V. (2014)
In: Polymer, Vol. 55, 20, 5146 - 5159. - ArticleAb-initio modeling of electromechanical coupling at Si surfacesHoppe, S.; Michl, A.; Weissmueller, J.; Mueller, S. (2014)
In: Journal of Applied Physics, Vol. 116, 7, 073507. - ArticleEffects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool friction-stir welded Mg AZ31Li, W.Y.; Fu, T.; Huetsch, L.; Hilgert, J.; Wang, F.F.; dos Santos, J.F.; Huber, N. (2014)
In: Materials and Design, Vol. 64, 714 - 720. - ArticleOrientation Distribution of Vertically Aligned Multiwalled Carbon NanotubesVainio, U.; Schnoor, T.I.W.; Koyiloth Vayalil, S.; Schulte, K.; Mueller, M.; Lilleodden, E.T. (2014)
In: The Journal of Physical Chemistry C, Vol. 118, 18, 9507 - 9513. - ArticleProperty optimization of porous metallic glasses via structural designSarac, B.; Wilmers, J.; Bargmann, S. (2014)
In: Materials Letters, Vol. 134, 306 - 310.
2013
- ArticleA study on local thermal and strain phenomena of high-speed friction stir-processed Mg AZ31Huetsch, L.L.; Herzberg, K.; dos SantosJ.F.; Huber, N. (2013)
In: Welding in the world, Vol. 57, 4, 515 - 521. - ArticleDetermination of average dislocation densities in metals by analysis of digitally processed TEM images- Bestimmung von durchschnittlichen Versetzungsdichten in Metallen durch Analyse digital bearbeiteter Transmissionselektronenmikroskopie-AufnahmenHusser, E.; Clausmeyer, T.; Gersteyn, G.; Bargmann, S. (2013)
In: Materialwissenschaft und Werkstofftechnik, Vol. 44, 6, 541 - 546. - ArticleComparative study of mechanical properties using standard and micro-specimens of base materials Inconel 625, Inconel 718 and Ti-6Al-4VKashaev, N.; Horstmann, M.; Ventzke, V.; Riekehr, S.; Huber, N. (2013)
In: Journal of Materials Research and Technology : JMRT, Vol. 2, 1, 43 - 47. - ArticleCrashworthiness of Magnesium Sheet StructuresSteglich, D.; Bohlen, J.; Tian, X.; Riekehr, S.; Kashaev, N.; Bargmann, S.; Letzig, D.; Kainer, K.U.; Huber, N. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 590 - 594. - ArticleExamination of the Energy Phase Space of Mixed Copper Grain Boundaries by Orientation Imaging Microscopy (OIM) and Sphere-on-a-Plate MethodZiehmer, M.; Tschoepe, A.; Birringer, R.; Markmann, J. (2013)
In: Acta Materialia, Vol. 61, 15, 5586 - 5594. - ArticleOn Energy and Entropy Influxes in the Green-Naghdi Type III Theory of Heat ConductionBargmann, S.; Favata, A.; Podio-Guidugli, P. (2013)
In: Proceedings of the Royal Society A, Vol. 469, 2152, 20120705. - ArticleModeling and simulation of size effects in metallic glasses with a non-local continuum mechanics theoryKlusemann, B.; Bargmann, S. (2013)
In: Journal of the Mechanical Behavior of Materials, Vol. 22, 1-2, 51 - 66. - ArticleFormation of Intermetallic Compounds in Dissimilar Friction Spot Weld of Al to Mg AlloysSuhuddin, U.; Fischer, V.; dos Santos, J.F. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 731 - 735. - ArticleCatalytic activity of nanostructured Au: Scale effects versus bimetallic/bifunctional effects in low-temperature CO oxidation on nanoporous AuWang, L.-C.; Zhong, Y.; Jin, H.; Widmann, D.; Weissmueller, J.; Behm, R.J. (2013)
In: Beilstein Journal of Nanotechnology, Vol. 4, 111 - 128. - ArticleAnalysis and comparison of two finite element algorithms for dislocation density based crystal plasticityKlusemann, B.; Svendsen, B.; Bargmann, S. (2013)
In: GAMM-Mitteilungen, Vol. 36, 2, 219 - 238. - ArticleComposites of Nanoporous Gold and PolymerWang, K.; Weissmueller, J. (2013)
In: Advanced Materials, Vol. 25, 9, 1280 - 1284. - ArticleAsymmetric mechanical properties and tensile behaviour prediction of aluminium alloy 5083 friction stir welding jointsRao, D.; Huber, K.; Heerens, J.; dos Santos, J.F.; Huber, N. (2013)
In: Materials Science and Engineering A, Vol. 565, 44 - 50. - ArticleMagnesium degradation as determined by artificial neural networksWillumeit, R.; Feyerabend, F.; Huber, N. (2013)
In: Acta Biomaterialia, Vol. 9, 10, 8722 - 8729. - ArticleFriction stir welding of structural steel S235 and S355Szabo, R.; Bergmann, L.; dos Santos, J.F. (2013)
In: Welding and Material Testing, Vol. 22, 4, 3 - 7. - ArticleHierarchical Nested-Network Nanostructure by DealloyingQi, Z.; Weissmueller, J. (2013)
In: ACS Nano, Vol. 7, 7, 5948 - 5954. - ArticleMicroscopic temperature field prediction during adiabatic loading using gradient extended crystal plasticityBargmann, S.; Ekh, M. (2013)
In: International Journal of Solids and Structures, Vol. 50, 6, 899 - 906. - ArticleRemarks on the Green–Naghdi theory of heat conductionBargmann, S. (2013)
In: Journal of Non-Equilibrium Thermodynamics, Vol. 38, 2, 101 - 118. - ArticleMechanical and failure behaviour of hybrid polymer–metal staked jointsAbibe, A.B.; Amancio-Filho, S.T.; dos Santos, J.F.; Hage, E.jr. (2013)
In: Materials and Design, Vol. 46, 338 - 347. - ArticleOn the macroscopic description of yield surface evolution by means of distortional hardening models: Application to magnesiumShi, B.; Mosler, J. (2013)
In: International Journal of Plasticity, Vol. 44, 1 - 22. - ArticleRetardation of fatigue crack growth in aircraft aluminium alloys via laser heating – Simulation based design optimisationSchnubel, D.; Horstmann, M.; Huber, N. (2013)
In: International Journal of Structural Integrity, Vol. 4, 4, 429 - 445. - ArticleMetallurgy and Mechanical Performance of AZ31 Magnesium Alloy Friction Spot WeldsCampanelli, L.C.; Suhuddin, U.F.H.; Antonialli, A.I.S.; dos Santos, J.F.; Alcantara, N.G.; Bolfarini, C. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 4, 515 - 521. - ArticleThe thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloySuhuddin, U.F.H.; Fischer, V.; dos Santos, J.F. (2013)
In: Scripta Materialia, Vol. 68, 1, 87 - 90. - ArticleSize effects in short fibre reinforced compositesScheider, I.; Chen, Y.; Hinz, A.; Huber, N.; Mosler, J. (2013)
In: Engineering Fracture Mechanics, Vol. 100, 17 - 27. - ArticleExperimental characterization of microstructure development during loading path changes in bcc sheet steelsClausmeyer, T.; Gerstein, G.; Bargmann, S.; Boogaard, A.H.van den; Zillmann, B. (2013)
In: Journal of Materials Science, Vol. 48, 2, 674 - 689. - ArticleA hybrid variationally consistent homogenization approach based on Ritzs methodBleier, N.; Mosler, J. (2013)
In: International Journal for Numerical Methods in Engineering, Vol. 94, 7, 625 - 647. - ArticleMechanical behavior of nanoscale Cu/PdSi multilayersKnorr, I.; Cordero, N.M.; Lilleodden, E.T.; Volkert, C.A. (2013)
In: Acta Materialia, Vol. 61, 13, 4984 - 4995. - ArticleTowards bio-inspired engineering materials: Modeling and simulation of the mechanical behavior of hierarchical bovine dental structureBargmann, S.; Scheider, I.; Xiao, T.; Yilmaz, E.; Schneider, G.A.; Huber, N. (2013)
In: Computational Materials Science, Vol. 79, 390 - 401. - ArticleThe influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium weldsTier, M.D; Rosendo, T.S; dos Santos, J.F.; Huber, N.; Mazzaferro, J.A.; Mazzaferro, C.P.; Strohaecker, T.R. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 6, 997 - 1005. - ArticleSilver particles growth by pulse electrolysis in acetonitrile solutionsKuntyi, O.; Okhremchuk, Y.; Bilan, O.; Hapke, J.; Saldan, I. (2013)
In: Central European Journal of Chemistry, Vol. 11, 4, 514 - 518. - ArticleEffect of backplate diffusivity on microstructure and mechanical properties of friction stir welded jointsZhang, Z.; Li, W.; Shen, J.; Chao, Y.J.; Li, J.; Ma, Y.-E. (2013)
In: Materials and Design, Vol. 50, 551 - 557. - ArticleMechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin filmsSchlueter, K.; Zamponi, C.; Hapke, J.; Hort, N.; Kainer, K.U.; Quandt, E. (2013)
In: International Journal of Materials Research, Vol. 104, 3, 286 - 292. - ArticleElectrocapillary coupling coefficients for hydrogen electrosorption on palladiumViswanath, R.N.; Weissmueller, J. (2013)
In: Acta Materialia, Vol. 61, 16, 6301 - 6309. - ArticleNon-linear deformation properties of materials with stochastically distributed anisotropic inclusionsNazarenko, L.; Bargmann, S.; Khoroshun, L. (2013)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 13, 1, 253 - 254. - ArticleThick-shelled, grazer-protected diatoms decouple ocean carbon and silicon cycles in the iron-limited Antarctic Circumpolar Current Assmy, P.; Smetacek,V.; Montresor, M.; Klaas, C.; Henjes, J.; Strass, V.H.; Arrieta, J.M.; Bathmann, U.; Berg, G.M.; Breitbarth, E.; Cisewski, B.; Friedrichs, L.; Fuchs, N.; Herndl, G.J.; Jansen, S.; Kraegefsky, S.; Latasa, M.; Peeken, I.; Roettgers, R.; Scharek, R.; Schueller, S.E.; Steigenberger, S.; Webb, A.; Wolf-Gladrow, D. (2013)
In: Proceedings of the National Academy of Sciences of the United States of America: PNAS, Vol. 110, 51, 20633 - 20638. - ArticleSign-inverted response of aluminum work function to tangential strainMichl, A.; Weissmueller, J.; Mueller, S. (2013)
In: Journal of Physics: Condensed Matter, Vol. 25, 44, 445012. - ArticleFriction stir welding development of aluminium alloys for structural connectionsGabor, R.; dos Santos, J.F. (2013)
In: Proceedings of the Romanian Academy : Series A, Vol. 14, 1, 64 - 71. - ArticleMethodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determinationRichter-Trummer, V.; Koch, D.; Witte, A.; dos Santos, J.F.; de Castro, P.M.S.T. (2013)
In: The International Journal of Advanced Manufacturing Technology, Vol. 68, 9-12, 2271 - 2281. - ArticleOn the interaction between different size effects in fibre reinforced PMMA: Towards composites with optimised fracture behaviourScheider, I.; Xiao, T.; Huber, N.; Mosler, J. (2013)
In: Computational Materials Science, Vol. 80, 35 - 42. - ArticleCavitation erosion of Cr60Ni40 coatings generated by friction surfacingHanke, S.; Beyer, M.; Silvonen, A.; dos Santos, J.F.; Fischer, A. (2013)
In: Wear , Vol. 301, 1-2, 415 - 423. - ArticleHybrid modelling of 7449-T7 aluminium alloy friction stir welded jointsWang, H.; Colegrove, P.A.; dos Santos, J.F. (2013)
In: Science and Technology of Welding and Joining, Vol. 18, 2, 147 - 153. - ArticleThe effect of heat treatment on crack control and grain refinement in laser beam welded Beta-solidifying TiAl-based alloyLiu, J.; Dahmen, M.; Ventzke, V.; Kashaev, N.; Poprawe, R. (2013)
In: Intermetallics, Vol. 40, 65 - 70. - ArticleDaily scale wintertime sea surface temperature and IPC-Navidad variability in the southern Bay of Biscay from 1981 to 2010Esnaola, G.; Saenz, J.; Zorita, E.; Fontain, A.; Valencia, V.; Lazure, P. (2013)
In: Ocean Science, Vol. 9, 4, 655 - 679. - ArticleExperimental and Numerical Investigation of Mg Alloy Sheet FormabilityNebebe Mekonen, M.; Steglich, D.; Bohlen, J.; Stutz, L.; Letzig, D.; Mosler, J. (2013)
In: Materials Science and Engineering A, Vol. 586, 204 - 214. - ArticleLap Shear Test of a Magnesium Friction Spot Joint: Numeric ModelingCampanelli, L.C.; Antonialli, A.I.S.; de.Alcantara, N.G.; Bolfarini, C.; Suhuddin, U.F.H.; dos Santos, J.F. (2013)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 10, 2, 97 - 102. - ArticleFailure of Magnesium Sheets Under Monotonic Loading: 3D Examination of Fracture Mode and MechanismsSteglich, D.; Morgeneyer, T. (2013)
In: International Journal of Fracture, Vol. 183, 1, 105 - 112. - ArticleNumerical investigation of the tool contact condition during friction stir welding of aerospace aluminium alloyWang, H.; Colegrove, P.A.; dos Santos, J.F. (2013)
In: Computational Materials Science, Vol. 71, 101 - 108. - ArticleFriction Riveting of glass-fibre-reinforced polyetherimide composite and titanium grade 2 hybrid jointsBlaga, L.; Bancila, R.; dos Santos, J.F.; Amancio-Filho, S.T. (2013)
In: Materials and Design, Vol. 50, 825 - 829. - ArticleFriction riveting (FricRiveting) – An innovative technology for joining hybrid polymer-metal and composite-metal structures / Nituirea prin frecare (FricRiveting) – O tehnologie inovativă pentru îmbinarea structurilor hibride polimer-metal și compozit-metalAmancio-Filho, S.T.; Blaga, L.; dos Santos, J.F.; Bancila, R. (2013)
In: Sudura : Romanian Welding Society´s Review, Vol. 23, 1, 14 - 16.
2012
- ArticleMechanical Testing of Solid-Solid Interfaces at the MicroscaleKupka, D.; Lilleodden, E.T. (2012)
In: Experimental Mechanics, Vol. 52, 6, 649 - 658. - ArticleThe solvent induced interfiber adhesion and its influence on the mechanical and filtration properties of polyethersulfone electrospun nanofibrous microfiltration membranesHomaeigohar, S.; Koll, J.; Lilleodden, E.T.; Elbahri, M. (2012)
In: Separation and Purification Technology, Vol. 98, 456 - 463. - ArticleFatigue crack propagation into the residual stress field along and perpendicular to laser beam butt-weld in aluminium alloy AA6056Vaidya, W.V.; Staron, P.; Horstmann, M. (2012)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 35, 5, 399 - 411. - ArticleMaterial modeling of AZ31 Mg sheet considering variation of r-values and asymmetry of the yield locusAndar, M.O.; Kuwabara, T.; Steglich, D. (2012)
In: Materials Science and Engineering A, Vol. 549, 82 - 92. - ArticleAb initio investigation of surface stress response to charging of transition and noble metalsAlbina, J.-M.; Elsaesser, C.; Weissmueller, J.; Gumbsch, P.; Umeno, Y. (2012)
In: Physical Review B, Vol. 85, 12, 125118. - ArticleVariational constitutive updates for microstructure evolution in hcp metalsMosler, J.; Homayonifar, M. (2012)
In: GAMM-Mitteilungen, Vol. 35, 1, 43 - 58. - ArticleRetardation of fatigue crack growth in aircraft aluminium alloys via laser heating - Experimental proof of conceptSchnubel, D.; Horstmann, M.; Ventzke, V.; Riekehr, S.; Staron, P.; Fischer, T.; Huber, N. (2012)
In: Materials Science and Engineering A, Vol. 546, 8 - 14. - ArticleHierarchical flexural strength of enamel: transition from brittle to damage-tolerant behaviourBechtle, S.; Oezcoban, H.; Lilleodden, E.T.; Huber, N.; Schreyer, A.; Swain, M.V.; Schneider, G.A. (2012)
In: Journal of the Royal Society Interface, Vol. 9, 71, 1265 - 1274. - ArticleA method to determine site-specific, anisotropic fracture toughness in biological materialsBechtle, S.; Oezcoban, H.; Yilmaz, E.D.; Fett, T.; Rizzi, G.; Lilleodden, E.T.; Huber, N.; Schreyer, A.; Swain, M.V.; Schneider, G.A. (2012)
In: Scripta Materialia, Vol. 66, 8, 515 - 518. - ArticleMechanical Characterization and Constitutive Modeling of Mg Alloy SheetsNebebe Mekonen, M.; Steglich, D.; Bohlen, J.; Letzig, D.; Mosler, J. (2012)
In: Materials Science and Engineering A, Vol. 540, 174 - 186. - ArticleLow cycle fatigue damage mechanism of the lightweight alloy Al2024Khan, S.; Wilde, F.; Beckmann, F.; Mosler, J. (2012)
In: International Journal of Fatigue, Vol. 38, 92 - 99. - ArticleUse of spherical indentation technique for measurement of property variations of GammaTiAlCornec, A.; Kabir, M.R.; Huber, N. (2012)
In: Journal of Materials Research, Vol. 27, 378 - 388. - ArticleEfficient variational constitutive updates by means of a novel parameterization of the flow ruleBleier, N.; Mosler, J. (2012)
In: International Journal for Numerical Methods in Engineering, Vol. 89, 9, 1120 - 1143. - ArticleThe influence of crack face contact on the prediction of fatigue crack propagation in residual stress fieldsSchnubel, D.; Huber, N. (2012)
In: Engineering Fracture Mechanics, Vol. 84, 15 - 24. - ArticlePreliminary Investigation on Friction Spot Welding of AZ31 Magnesium AlloyCampanelli, L.C.; Suhuddin, U.F.H.; dos Santos, J.F.; Alcantara, N.G. (2012)
In: Materials Science Forum, THERMEC 2011, Vol. 706-709, 3016 - 3021. - ArticleTransient Wear Simulation in Sliding Contacts of Spur Gear TeethChen, Y.J.; Huber, N. (2012)
In: Computers, Materials & Continua : CMC, Vol. 29, 1, 1 - 14. - ArticleOn the Role of Residual Ag in Nanoporous Au Catalysts for CO Oxidation: A Combined Microreactor and TAP Reactor StudyWang, L.-C.; Zhong, Y.; Widmann, D.; Weissmueller, J.; Behm, R.J. (2012)
In: ChemCatChem, Vol. 4, 2, 251 - 259. - ArticleDevelopment of computational models to predict the mechanical behavior of Friction Riveting jointsBorges, M.F.; Amancio-Filho, S.T.; dos Santos, J.F.; Strohaecker, T.R.; Mezzaferro, J.A.E. (2012)
In: Computational Materials Science, Vol. 54, 7 - 15. - ArticleA constitutive law for the thermo-mechanical modelling of magnesium alloy extrusionErtuerk, S.; Brocks, W.; Bohlen, J.; Letzig, D.; Steglich, D. (2012)
In: International Journal of Material Forming, Vol. 5, 4, 325 - 339. - ArticleExperimental and numerical lifetime assessment of Al 2024 sheetKhan, S.; Kintzel, O.; Mosler, J. (2012)
In: International Journal of Fatigue, Vol. 37, 112 - 122. - ArticleCrack retardation mechanism due to overload in base material and laser welds of Al alloysDaneshpour, S.; Dyck, J.; Ventzke, V.; Huber, N. (2012)
In: International Journal of Fatigue, Vol. 42, 95 - 103. - ArticleOptimization of hydrogen storage tubular tanks based on light weight hydridesLozano, G.A.; Na Ranong, C.; Bellosta von Colbe, J.M.; Bormann, R.; Hapke, J.; Fieg, G.; Klassen, T.; Dornheim, M. (2012)
In: International Journal of Hydrogen Energy, Vol. 37, 3, 2825 - 2834. - ArticleEfficient modeling of microstructure evolution in magnesium by energy minimizationHomayonifar, M.; Mosler, J. (2012)
In: International Journal of Plasticity, Vol. 28, 1, 1 - 20. - ArticleTemperature and Texture Development during High Speed Friction Stir Processing of Magnesium AZ31Huetsch, L.L.; Hilgert, J.; Herzberg, K.; dos Santos, J.; Huber, N. (2012)
In: Advanced Engineering Materials, Vol. 14, 9, 762 - 771. - ArticleBiaxial Deformation Behaviour of AZ31 Magnesium Alloy: Crystal-Plasticity-Based Prediction and Experimental ValidationSteglich, D.; Jeong, Y.; Andar, M.O.; Kuwabara, T. (2012)
In: International Journal of Solids and Structures, Vol. 49, 25, 3551 - 3561. - ArticleMicrostructural Evolution During Friction Surfacing of Dissimilar Aluminum AlloysSuhuddin, U.; Mironow, S.; Krohn, H.; Beyer, M.; dos Santos, J.F. (2012)
In: Metallurgical and Materials Transactions A, Vol. 43, 13, 5224 - 5231. - ArticleInfluence of the FSW clamping force on the final distortion and residual stress fieldRichter-Trummer, V.; Suzano, E.; Beltrao, M.; Roos, A.; dos Santos, J.F.; de Castro, P.M.S.T. (2012)
In: Materials Science and Engineering A, Vol. 538, 81 - 88. - ArticleFeasibility study of the Friction Spot Welding (FSpW) process in thermoplastics - Estudo de viabilidade da soldagem de termoplásticos por "Friction Spot Welding" (FSpW)de Oliveira, P.H.F.; Amancio Filho, S.T; dos Santos, J.F.; Hage, E.jr. (2012)
In: Soldagem & Inspecao, Vol. 17, 2, 96 - 103. - ArticleThermodynamically and variationally consistent modeling of distortional hardening: application to magnesiumShi, B.; Mosler, J. (2012)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 12, 1, 259 - 260. - ArticleInfluence of the Local Chemical Composition on the Mechanical Properties of Laser Beam Welded Al-Li AlloysEnz, J.; Riekehr, S.; Ventzke, V.; Kashaev, N. (2012)
In: Physics Procedia, Vol. 39, 51 - 58. - ArticleInvestigation of In Situ and Conventional Post-Weld Heat Treatments on Dual-Laser-Beam-Welded Gamma-TiAl-Based AlloyLiu, J.; Ventzke, V.; Staron, P.; Schell, N.; Kashaev, N.; Huber, N. (2012)
In: Advanced Engineering Materials, Vol. 14, 10, 923 - 927. - ArticleGrain rotation by dislocation climb in a finite-size grain boundaryBachurin, D.V.; Nazarov, A.A.; Weissmueller, J. (2012)
In: Acta Materialia, Vol. 60, 20, 7064 - 7077. - ArticleMetal content and morphology of nanostructured Ag–Pd co-depositsKuntyi, O.; Saldan, I.; Bilan, O.; Okhremchuk, Y.; Hapke, J.; Kree, V.; Just, R. (2012)
In: Materials Letters, Vol. 69, 79 - 81. - ArticleComplex Dental Structure and Wear Biomechanics in Hadrosaurid DinosaursErickson, G.M.; Krick, B.A.; Hamilton, M.; Bourne, G.R.; Norell, M.A.; Lilleodden, E.; Sawyer, W.G. (2012)
In: Science, Vol. 338, 6103, 98 - 101. - ArticleShear layer modelling for bobbin tool friction stir weldingHilgert, J.; dos Santos, J.F.; Huber, N. (2012)
In: Science and Technology of Welding and Joining, Vol. 17, 6, 454 - 459. - ArticleParameters optimization for friction spot welding of AZ31 magnesium alloy by Taguchi method - Otimizacao dos parametros de soldagem por friccao por ponto da liga de magnesio AZ31 pelo metodo de TaguchiCampanelli, L.C.; Suhuddin, U.F.H.; dos Santos, J.F.Alcantara, N.G. (2012)
In: Soldagem & Inspecao, Vol. 17, 1, 26 - 31. - ArticleCoupling aspects in the simulation of hydrogen-induced stress-corrosion crackingBrocks, W.; Falkenberg, R.; Scheider, I. (2012)
In: Procedia IUTAM, Vol. 3, 11 - 24. - ArticleFriction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructureCoelho, R.S.; Kostka, A.; dos Santos, J.F.; Kaysser-Pyzalla, A. (2012)
In: Materials Science and Engineering A, Vol. 556, 175 - 183. - ArticleSign-inversion of charging-induced variation of electrical resistance of nanoporous platinumSteyskal, E.-M.; Besenhard, M.; Landgraf, S.; Zhong, Y.; Weissmueller, J.; Poelt, P.; Albu, M.; Wuerschum, R. (2012)
In: Journal of Applied Physics, Vol. 112, 7, 073703. - ArticleElectrically Tunable Nanoporous Carbon Hybrid ActuatorsShao, L.-H.; Biener, J.; Jin, H.-J.; Biener, M.M.; Baumann, T.F.; Weissmueller, J. (2012)
In: Advanced Functional Materials, Vol. 22, 14, 3029 - 3034. - ArticleFatigue and fracture strength of ship block joints welded with large gapsFricke, W.; Zacke, S.; Kocak, M.; Eren, S.E. (2012)
In: Welding in the world, Vol. 56, 3-4, 30 - 39. - ArticleProzessoptimierung fuer das Laserstrahlschweissen von hochfesten Aluminium-Lithium-LegierungenEnz, J.; Riekehr, S.; Ventzke, V.; Kashaev, N.; Huber, N. (2012)
In: Schweissen und Schneiden, Vol. 64, 8, 482 - 485. - ArticleAn analytical fracture mechanics model for estimation of S–N curves of metallic alloys containing large second phase particlesZerbst, U.; Madia, M.; Hellmann, D. (2012)
In: Engineering Fracture Mechanics, Vol. 82, 115 - 134. - ArticleRetardation of fatigue crack growth in aircraft aluminium alloys via laser heating – Numerical prediction of fatigue crack growthSchnubel, D.; Huber, N. (2012)
In: Computational Materials Science, Vol. 65, 461 - 469. - ArticleMacroscopic 3D Nanographene with Dynamically Tunable Bulk PropertiesBiener, J.; Dasgupta, S.; Shao, L.; Wang, D.; Worsley, M.A.; Wittstock, A.; Lee, J.R.I.; Biener, M.M.; Orme, C.A.; Kucheyev, S.O.; Wood, B.C.; WilleyT.M.; Hamza, A.V.; Weissmueller, J.; Hahn, H.; Baumann, T.F. (2012)
In: Advanced Materials, Vol. 24, 37, 5083 - 5087. - ArticleOn the mechanism of electrochemical modulation of plasmonic resonancesShao, L.H.; Ruther, M.; Linden, S.; Wegener, M.; Weissmueller, J. (2012)
In: Applied Physics Letters, Vol. 101, 12, 1109.
2011
- ArticleNumerical simulation of forming limit test for AZ31 at 200°CNebebe Mekonen, M.; Bohlen, J.; Steglich, D.; Mosler, J. (2011)
In: Key Engineering Materials, Sheet Metal 2011, Vol. 473, 468 - 473. - ArticleEffective 3D failure simulations by combining the advantages of embedded Strong Discontinuity Approaches and classical interface elementsRadulovic, R.; Bruhns, O.T.; Mosler, J. (2011)
In: Engineering Fracture Mechanics, Vol. 78, 12, 2470 - 2485. - ArticleApplication of Danckwerts-type boundary conditions to the modeling of the thermal behavior of metal hydride reactorsNa Ranong, C.; Lozano, G.; Hapke, J.; Roetzel, W.; Fieg, G.; Bellosta von Colbe, J. (2011)
In: Chemical Engineering Science, Vol. 66, 20, 4654 - 4662. - ArticleInfluence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys Springer, H.; Kostka, A.; dos Santos, J.F.; Raabe, D. (2011)
In: Materials Science and Engineering A, Vol. 528, 13-14, 4630 - 4642. - ArticleA thermodynamically and variationally consistent class of damage-type cohesive modelsMosler, J.; Scheider, I. (2011)
In: Journal of the Mechanics and Physics of Solids, Vol. 59, 8, 1647 - 1668. - ArticleA Material with Electrically Tunable Strength and Flow StressJin, H.-J.; Weissmueller, J. (2011)
In: Science, Vol. 332, 6034, 1179 - 1182. - ArticleModelling direction-dependent hardening in magnesium sheet forming simulationsSteglich, D.; Brocks, W.; Bohlen, J.; Barlat, F. (2011)
In: International Journal of Material Forming, Vol. 4, 2, 243 - 253. - ArticleMechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy Rosendo, T.S.; Parra, B.; Tier, M.A.D.; da Silva, A.A. M.; dos Santos, J.F.; Strohaecker, T.R.; Alcantara, N.G. (2011)
In: Materials and Design, Vol. 32, 3, 1094 - 1100. - ArticleSolid State Spot Welding of Lightweight Alloys - Soldagem por Ponto no Estado Solido de Ligas Levesde Campanelli, L.C.; de Alcantara, N.G.; dos Santos, J.F. (2011)
In: Soldagem & Inspecao, Vol. 16, 3, 301 - 307. - ArticlePreliminary Investigation of the Microstructure and Mechanical Behaviour of 2024 Aluminium Alloy Friction Spot WeldsAmancio-Filho, S.T.; Camillo, A.P.C.; Bergmann, L.; dos Santos, J.F.; Kury, S.E.; Machado, N.G.A. (2011)
In: Materials Transactions, Vol. 52, 5, 985 - 991. - ArticleCompressive Failure of UD-CFRP containing void defects:In situ SEM MicroanalysisHapke, J.; Gehrig, F.; Huber, N.; Schulte, K.; Lilleodden, E.T. (2011)
In: Composites Science and Technology, Vol. 71, 9, 1242 - 1249. - ArticleIn Situ Experiments with Synchrotron High-Energy X-Rays and NeutronsStaron, P.; Fischer, T.; Lippmann, T.; Stark, A.; Daneshpour, S.; Schnubel, D.; Uhlmann, E.; Gerstenberger, R.; Camin, B.; Reimers, W.; Eidenberger, E.; Clemens, H.; Huber, N.; Schreyer, A. (2011)
In: Advanced Engineering Materials, Vol. 13, 8, 658 - 663. - ArticleHENRY GRANJON PRIZE COMPETITION 2009 Winner Category A: “Joining and Fabrication Technology”FRICTION RIVETING: development and analysis of a new joining technique for polymer-metal multi-material structuresAmancio-Filho, S.T. (2011)
In: Welding in the world, Vol. 55, 1-2, 13 - 24. - ArticleOn the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structuresAmancio, S.T.; Bueno, C.; dos Santos, J.F.; Huber, N.; Hage, E.jr. (2011)
In: Materials Science and Engineering A, Vol. 528, 10-11, 3841 - 3848. - ArticleMechanical properties and stress corrosion cracking behaviour of AZ31 magnesium alloy laser weldmentsSrinivasan, P.B.; Riekehr, S.; Blawert, C.; Dietzel, W.; Kocak, M. (2011)
In: Transactions of Nonferrous Metals Society of China , Vol. 21, 1, 1 - 8. - ArticleOn the coupling of plastic slip and deformation-induced twinning in magnesium: A variationally consistent approach based on energy minimizationHomayonifar, M.; Mosler, J. (2011)
In: International Journal of Plasticity, Vol. 27, 7, 983 - 1003. - ArticleDevelopment and Analysis of a New Joining Method for Polymer–Metal Hybrid StructuresAbibe, A.B.; Amancio-Filho, S.T.; dos Santos, J.F.; Hage, E.jr.; (2011)
In: Journal of Thermoplastic Composite Materials, Vol. 24, 2, 233 - 249. - ArticleParameters affecting the damage tolerance behaviour of railway axlesZerbst, U.; Schoedel, M.; Beier, H.T. (2011)
In: Engineering Fracture Mechanics, Vol. 78, 5, 793 - 809. - ArticleComparison of different stress-state dependent cohesive zone models applied to thin-walled structuresScheider, I.; Rajendran, M.; Banerjee, A. (2011)
In: Engineering Fracture Mechanics, Vol. 78, 3, 534 - 543. - ArticleEfficient modeling of localized material failure by means of a variationally consistent embedded strong discontinuity approachMosler, J.; Stankovic, L.; Radulovic, R. (2011)
In: International Journal for Numerical Methods in Engineering, Vol. 88, 10, 1008 - 1041. - ArticleFriction Riveting development and analysis of a new joining technique for polymer-metal multi-material structures - Rivettatura a frizione: sviluppo ed analisi de una nuova tecnologia per la giunzione di strutture composite polmero-metallicheAmancio-Filho, S.T. (2011)
In: Rivista Italiana della Saldatura, Vol. 63, 2, 197 - 208. - ArticleOn the thermomechanical coupling in finite strain plasticity theory with non-linear kinematic hardening by means of incremental energy minimizationCanadija, M.; Mosler, J. (2011)
In: International Journal of Solids and Structures, Vol. 48, 7-8, 1120 - 1129. - ArticleAn investigation on Friction Spot Welding in AA6181-T4 AlloyParra, B.; Saccon, V.T.; de Alcantara, N.G.; Rosendo, I.; dos Santos, J.F. (2011)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 8, 3, 184 - 190. - ArticleMicrostructure evaluation and mechanical properties of a friction stir spot welded TRIP 800 steelMazzaferro, C.C.P.; Ramos, F.D.; Mazzaferro, J.A.E.; de Souza Rosendo, T.; Tier, M.A.D.; da Silva, A.M.; dos Santos, J.F.; Reguly, A. (2011)
In: Welding International, Vol. 25, 9, 683 - 690. - ArticleFriction Riveting (FricRiveting). Development of a New Joining Technique for Polymer-Metal Hybrid Joints. Part II:Thermal and Mechanical Properties - Rebitagem por friccao ("FricRiveting"). Desenvolvimento de uma nova tecnica de uniao para juntas híbridas do tipo polimero-metal. Parte II: propriedades termicas e mecanicasAmancio-Filho, S.T. (2011)
In: Soldagem & Inspecao, Vol. 16, 4, 396 - 404. - ArticleFriction Riveting (FricRiveting). Development of a New Joining Technique for Polymer-Metal Hybrid Joints. Part I: Process and Microstructure - Rebitagem por friccao ("FricRiveting"). Desenvolvimento de uma nova tecnica de uniao para juntas hibridas do tipo polimero-metal. Parte I: processo e microestruturaAmancio-Filho, S.T. (2011)
In: Soldagem & Inspecao, Vol. 16, 4, 387 - 394. - ArticleForeword: Neutron and X-Ray Diffraction Studies of Advanced MaterialsBarabash, R.I.; Tiley, J.; Wang, Y.D.; Liaw, P.; Lilleodden, E.T. (2011)
In: Metallurgical and Materials Transactions A, Vol. 42, 1, 4 - 5. - ArticleApplication of eddy current techniques to inspect friction spot welds in aluminium alloy AA2024 and a composite materialSantos, T.G.; Vilaca, P.; Quintino, L.; dos Santos, J.F.; Miranda, R.M. (2011)
In: Welding in the world, Vol. 55, 9-10, 12 - 18. - ArticleCavitation erosion of NiAl-bronze layers generated by friction surfacingHanke, S.; Fischer, A.; Beyer, M.; dos Santos, J. (2011)
In: Wear , Vol. 273, 1, 32 - 37. - ArticleModeling of coupled deformation-induced twinning and dislocation slip using incremental energy minimizationHomayonifar, M.; Mosler, J. (2011)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 11, 1, 387 - 388. - ArticleComparison of different distortional hardening models suitable for the analysis of magnesiumShi, B.; Mosler, J. (2011)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 11, 1, 439 - 440. - ArticleThermodynamically and variationally consistent cohesive zone models for large deformationMosler, J.; Scheider, I. (2011)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 11, 1, 167 - 168. - ArticleDynamic electro-chemo-mechanical analysis during cyclic voltammetrySmetanin, M.; Deng, Q.; Weissmueller, J. (2011)
In: Physical Chemistry Chemical Physics, Vol. 13, 38, 17313 - 17322. - ArticleAn efficient algorithm for the inverse problem in elasticity imaging by means of variational r-adaptionArnold, A.; Bruhns, O.T.; Mosler, J. (2011)
In: Physics in Medicine and Biology, Vol. 56, 14, 4239 - 4265. - ArticleKinematics of polycrystal deformation by grain boundary slidingWeissmueller, J.; Markmann, J.; Grewer, M.; Birringer, R. (2011)
In: Acta Materialia, Vol. 59, 11, 4366 - 4377. - ArticleThermal Models for Bobbin Tool Friction Stir Welding Hilgert, J.; Schmidt, H.N.B.; dos Santos, J.F.; Huber, N. (2011)
In: Journal of Materials Processing Technology, Vol. 211, 2, 197 - 204. - ArticleNovel approach for the treatment of cyclic loading using a potential-based cohesive zone modelScheider, I.; Mosler, J. (2011)
In: Procedia Engineering, Vol. 10, 2164 - 2169. - ArticleDiffusion bonding of TiAl using reactive Ni/Al nanolayers and Ti and Ni foilsSimoees, S.; Viana, F.; Kocak, M.; Ramos, A.S.; Vieira, M.T. (2011)
In: Materials Chemistry and Physics, Vol. 128, 1-2, 202 - 207. - ArticleResearch with Neutron and Synchrotron Radiation on Aerospace and Automotive Materials and ComponentsKaysser, W.; Esslinger, J.; Abetz, V.; Huber, N.; Kainer, K.U.; Klassen, T.; Pyczak, F.; Schreyer, A.; Staron, P. (2011)
In: Advanced Engineering Materials, Vol. 13, 8, 637 - 657. - ArticleAnisotropic plastic Deformation and Damage in commercial Al 2198 T8 Sheet MetalSteglich, D.; Wafai, H.; Besson, J. (2011)
In: Key Engineering Materials, Advances in Fracture and Damage Mechanics IX, Vol. 452-453, 97 - 100. - ArticleAn incremental minimization principle suitable for the analysis of low cycle fatigue in metals: A coupled ductile–brittle damage modelKintzel, O.; Mosler, J. (2011)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 200, 45-46, 3127 - 3138. - ArticleMicrostructural and mechanical characterization of laser beam welded AA6056 Al-alloyPakdil, M.; Cam, G.; Kocak, M.; Erim, S. (2011)
In: Materials Science and Engineering A, Vol. 528, 24, 7350 - 7356. - ArticleMicrostructural mapping of friction stir welded AA 7075-T6 and AlMgSc alloys using electrical conductivitySantos, T.G.; Miranda, R.M.; Vilaca, P.; Teixeira, J.P.; dos Santos, J. (2011)
In: Science and Technology of Welding and Joining, Vol. 16, 7, 630 - 635.
2010
- ArticleModelling of unlubricated oscillating sliding wear of DLC-coatings considering surface topography, oxidation and graphitisationSteiner, L.; Bouvier, V.; May, U.; Hegadekatte, V.; Huber, N. (2010)
In: Wear , Vol. 268, 9-10, 1184 - 1194. - ArticleEmpirical kinetic model of sodium alanate reacting system (I). Hydrogen absorptionLozano, G.A.; Na Ranong, C.; Bellosta von Colbe, J.M.; Bormann, R.; Fieg, G.; Hapke, J.; Dornheim, M. (2010)
In: International Journal of Hydrogen Energy, Vol. 35, 13, 6763 - 6772. - ArticlePreliminary study on the feasibility of friction spot welding in PMMAde Oliveira, P.H.F.; Amancio-Filho, S.T.; dos Santos, J.F.; Hage, E.jr. (2010)
In: Materials Letters, Vol. 64, 19, 2098 - 2101. - ArticleImproving interfacial properties of a laser beam welded dissimilar joint of aluminium AA6056 and titanium Ti6Al4V for aeronautical applicationsVaidya, W.V.; Horstmann, M.; Ventzke, V.; Petrovski, B.; Kocak, M.; Kocik, R.; Tempus, G. (2010)
In: Journal of Materials Science, Vol. 45, 22, 6242 - 6254. - ArticleAn experimental and numerical lifetime assessment of Al 2024 sheetKhan, S.S.; Hellmann, D.; Kintzel, O.; Mosler, J. (2010)
In: Procedia Engineering, Vol. 2, 1, 1141 - 1144. - ArticleMicrocompression study of Mg (0 0 0 1) single crystal Lilleodden, E. (2010)
In: Scripta Materialia, Vol. 62, 8, 532 - 535. - ArticleSimulation of friction and wear in DLC/steel contacts for different loading histories and geometries: Ball-on-plate configuration and piston–cylinder-contactsSteiner, L.; Bouvier, V.; May, U.; Huber, N. (2010)
In: Tribology International, Vol. 43, 8, 1410 - 1416. - ArticleModelling of thermo-mechanical Behaviour of Magnesium Alloys during Indirect ExtrusionErtuerk, S.; Steglich, D.; Bohlen, J.; Letzig, D.; Brocks, W. (2010)
In: Key Engineering Materials, Advances on Hot Extrusion and Simulation of Light Alloys, Vol. 424, 167 - 171. - ArticleEfficient computation of the elastography inverse problem by combining variational mesh adaption and a clustering techniqueArnold, A.; Reichling, S.; Bruhns, O.T.; Mosler, J. (2010)
In: Physics in Medicine and Biology, Vol. 55, 7, 2035. - ArticleDuctile Tearing Resistance of Metal SheetsBrocks, W.; Anuschewski, P.; Scheider, I. (2010)
In: Engineering Failure Analysis, Vol. 17, 3, 607 - 616. - ArticleSimulation of Stress-Corrosion Cracking by the Cohesive ModelFalkenberg, R.; Brocks, W.; Dietzel, W.; Scheider, I. (2010)
In: Key Engineering Materials, Advances in Fracture and Damage Mechanics VIII , Vol. 417-418, 329 - 332. - ArticleMicrostructural characterization of friction welded TiAl-Ti6Al4V hybrid jointsVentzke, V.; Brokmeier, H.-G.; Merhof, P.; Kocak, M. (2010)
In: Solid State Phenomena, Texture and Anisotropy of Polycrystals III, Vol. 160, 319 - 326. - ArticleStress State Dependent Cohesive Zone Model for Thin Walled StructuresRajendran, M.; Scheider, I.; Banerjee, A. (2010)
In: Key Engineering Materials, Advances in Fracture and Damage Mechanics VIII , Vol. 417-418, 353 - 356.