Publikationen und Konferenzbeiträge
2025
journal articleGenerative 3D reconstruction of Ti-6Al-4V basketweave microstructures by optimization of differentiable microstructural descriptorsBlümer, V.,Safi, A.R.,Soyarslan, C.,Klusemann, B.,van den Boogaard, T. (2025)
In: Acta Materialia, Vol. 291, 120947, Elsevier, Amsterdam.- journal articleMechanical behavior, microstructural evolution and texture analysis of AA2024-T351 processed by multi-layer friction surfacing with high build ratesHoffmann, M.,Roos, A.,Klusemann, B. (2025)
In: Progress in Additive Manufacturing, Springer International Publishing, Cham. - journal articleFriction surfacing of aluminum alloys on Ti6Al4V - Investigation of process parameters, material deposition behavior and bonding mechanismsHoffmann, M.,Roos, A.,Klusemann, B. (2025)
In: Surface and Coatings Technology, Vol. 503, 131985, Elsevier, Amsterdam. - journal articleEnhancement of the mechanical properties of semi-stationary bobbin-tool friction stir welded joints in AA2219 through post-weld heat treatmentRezende, G.N.,Bernardi, M.,Hoffmann, M.,Bergmann, L.,Zepon, G.,Klusemann, B. (2025)
In: Materials Science and Engineering: A, Vol. 920, 147498, Elsevier, Amsterdam.
Zur Publikation beim Verlag 2024,2024
- journal articleApplication of Friction Riveting technique for the assembly of electronic components on printed circuit boards (PCB)Rodrigues, C.F.,Vilas Boas, M.C.,Blaga, L.,Bartz, O.,Klusemann, B. (2024,2024)
In: The International Journal of Advanced Manufacturing Technology, Vol. 133, 5163-5173, Springer, London.
2024
- journal articleAn Original Machine Learning-Based Approach for the Online Monitoring of Refill Friction Stir Spot Welding: Weld Diagnostic and Tool State PrognosticDahmene, F.,Yaacoubi, S.,El Mountassir, M.,Porot, G.,Masmoudi, M.,Nennig, P.,Suhuddin, U.F.H.,Dos Santos, J.F. (2024)
In: Journal of Materials Engineering and Performance, Vol. 33, 1931-1947, Springer, New York, NY. - journal articleEffect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditionsExamilioti, T.N.,Karanikolas, D.,Riekehr, S.,Al-Hamdany, N.,Papanikos, P.,Klusemann, B.,Kashaev, N.,Alexopoulos, N.D. (2024)
In: Engineering Fracture Mechanics, Vol. 295, 109811, Elsevier, Kidlington. - journal articleBehavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloyPasetti-Rosa, A.,Victoria-Hernandez, J.,da Cunha, P.H.C.P.,de Lima Lessa, C.R.,Bergmann, L.A.,Kurtz, G.,Letzig, D.,Klusemann, B. (2024)
In: Journal of Materials Research and Technology : JMRT, Vol. 29, 4895-4901, Elsevier, Rio de Janeiro. - journal articleExperimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6Becker, N.,dos Santos, J.F.,Klusemann, B. (2024)
In: Engineering Fracture Mechanics, Vol. 300, 109963, Elsevier, Kidlington. - journal articleCorrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloysAntunes Duda, E.,Kallien, Z.,da Silva Soares, S.,Hernandez Schneider, T.,Piaggio Cardoso, H.R.,Braga Lemos, G.V.,Falcade, T.,Reguly, A.,Klusemann, B. (2024)
In: Scientific Reports, Vol. 14, 9882, Springer Nature, London. - journal articleInvestigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacingHoffmann, M.,Roos, A.,Klusemann, B. (2024)
In: Surface and Coatings Technology, Vol. 480, 130610, Elsevier, Amsterdam. - journal articleEffect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phasesde Castro, C.C.,Neves, A.M.,Klusemann, B. (2024)
In: Journal of Magnesium and Alloys, Vol. 12, 6, 2298-2311, Elsevier, Amsterdam. - journal articleNumerical simulation of friction extrusion: process characteristics and material deformation due to frictionDiyoke, G.,Rath, L.,Chafle, R.,Ben Khalifa, N.,Klusemann, B. (2024)
In: International Journal of Material Forming, Vol. 17, 26, Springer, Paris. - journal articleData-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacingBock, F.E.,Kallien, Z.,Huber, N.,Klusemann, B. (2024)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 418A, 116453, Elsevier, Amsterdam. - journal articleClarify the forming mechanism and afecting factors of defects in semi-stationary shoulder bobbin tool friction stir weldingQuan, W.,Wenya, L.,Xiaogang, D.,Shouwei, R.,Jing, Z.,Klusemann, B. (2024)
In: Welding in the World, Vol. 68, 1783–1790, Springer, Berlin. - journal articleLocal and global mechanical properties of orbital friction stir welding on API X65 PSL2 steel / Inconel 625 clad pipesAmavisca, C.V.,Lemos, G.V.B.,Ramos, F.D.,Bergmann, L.,Reguly, A.,Klusemann, B. (2024)
In: The International Journal of Advanced Manufacturing Technology, Vol. 134, 3325–3336, Springer, London. - journal articleAnalysis of Mechanical Properties and Microstructure of Single and Double-Pass Friction Stir Welded T-Joints for Aluminium Stiffened PanelsWagner, D.,Bernardi, M.,Grassel, F.,Chen, T.,Schimanski, K.,Bergmann, L.,Klusemann, B. (2024)
In: Materials & Design, Vol. 247, 113438, Elsevier, Oxford. - journal articleFeasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic compositeMalaske, L.,Blaga, L.A.,Bergmann, L.,Ahmad, B.,Zhang, X.,Klusemann, B. (2024)
In: Journal of Composite Materials, Vol. 58, 17, 1987–2003, Sage Publications, Stanford. - journal articleEffect of Ambient Conditions in Friction SurfacingHoffmann, M.,Duda, E.A.,Aspes, P.,Klusemann, B. (2024)
In: Welding in the World, Vol. 69, 397-406, Springer, Berlin. - journal articleInsight into layer formation during friction surfacing: Relationship between deposition behavior and microstructureHoffmann, M.,Kallien, Z.,Antunes Duda, E.,Klusemann, B. (2024)
In: Materials Today : Communications, Vol. 41, 110337, Elsevier, Amsterdam. - journal articleDuctility and fracture behavior of cold spray additive manufactured zincHuang, C.J.,Chen, T.,Fu, B.L.,Zhang, Z.M.,List, A.,Wiehler, L.,Klusemann, B.,Li, W.Y.,Gärtner, F.,Klassen, T. (2024)
In: Additive Manufacturing, Vol. 89, 104310, Elsevier, Amsterdam. - journal articleFatigue crack initiation and propagation in plain and notched PBF-LB/M, WAAM, and wrought 316L stainless steel specimensBraun, M.,Chen, T.,Shen, J.,Fassmer, H.,Klusemann, B.,Sheikhi, S.,Ehlers, S.,Müller, E.,Sarmast, A.,Schubnell, J. (2024)
In: Materials & Design, Vol. 244, 113122, Elsevier, Oxford. - journal articleCALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systemsMathew, E.,Chafle, R.,Klusemann, B. (2024)
In: Calphad, Vol. 85, 102692, Pergamon Press, Oxford.
2023
- journal articleStrengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed FusionTaghipour, A.,Mazaheri, Y.,McDavid, J.,Sheikhi, S.,Braun, M.,Shen, J.,Klusemann, B.,Ehlers, S. (2023)
In: Advanced Engineering Materials, Vol. 25, 4, 2201230, Wiley, Weinheim. - journal articleFatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealantBernardi, M.,Suhuddin, U.,Fu, B.,Gerber, J.,Bianchi, M.,Ostrovsky, I.,Sievers, B.,Faes, K.,Maawad, E.,Lazzeri, L.,dos Santos, J.,Klusemann, B. (2023)
In: International Journal of Fatigue, Vol. 172, 107539, Elsevier, Oxford. - journal articleAnisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacingRath, Lars,Kallien, Zina,Roos, Arne,Santos, Jorge F. dos,Klusemann, Benjamin (2023)
In: The International Journal of Advanced Manufacturing Technology, Vol. 125, 5-6, 2091-2102, Springer Science and Business Media LLC, London. - journal articleFriction Stir Lap Welding of Inconel 625 and a High Strength SteelBossle, E.P.,Vicharapu, B.,Lemos, G.V.B.,Lessa, C.R.D.L.,Bergmann, L.,dos Santos, J.F.,Clarke, T.G.R.,De, A. (2023)
In: Metals, Vol. 13, 1, 146, MDPI, Basel. - journal articleOn anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditionsExamilioti, T.N.,Li, W.,Kashaev, N.,Ventzke, V.,Klusemann, B.,Alexopoulos, N.D. (2023)
In: Journal of Materials Research and Technology : JMRT, Vol. 24, 895-908, Elsevier, Rio de Janeiro. - journal articleFriction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint propertiesRodrigues, C.F.,Blaga, L.,Klusemann, B. (2023)
In: Journal of Materials Research and Technology : JMRT, Vol. 24, 4639-4649, Elsevier, Rio de Janeiro. - journal articleTemperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacingKallien, Z.,Roos, A.,Knothe-Horstmann, C.,Klusemann, B. (2023)
In: Materials Science and Engineering: A, Vol. 871, 144872, Elsevier, Amsterdam. - journal articleSemi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloyLi, G.,Chen, T.,Fu, B.,Shen, J.,Bergmann, L.,Zhou, L.,Chen, K.,dos Santos, J.F.,Klusemann, B. (2023)
In: Journal of Materials Processing Technology, Vol. 317, 117984, Elsevier, Amsterdam. - journal articleQuasi-in-situ observation of microstructure at the friction interface: shear deformation; dynamic recrystallization and mechanical responses during friction welding processJin, F.,Fu, B.,Shen, J.,Li, J.,Li, W.,dos Santos, J.F.,Klusemann, B. (2023)
In: Materials Characterization, Vol. 200, 112911, Elsevier, New York. - journal articleRapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processingEscobar, J.,Gwalani, B.,Silverstein, J.,Ajantiwalay, T.,Roach, C.,Bergmann, L.,dos Santos, J.F.,Maawad, E.,Klusemann, B.,Devaraj, A. (2023)
In: Materials Characterization, Vol. 202, 112999, Elsevier, New York. - journal articleFatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacingKallien, Z.,Knothe-Horstmann, C.,Klusemann, B. (2023)
In: Additive Manufacturing Letters, Vol. 6, 100154, Elsevier, Amsterdam. - journal articleEffect of Welding Speed on Friction Stir Welds of PM2000 AlloyWang, J.,Fu, B.,Bergmann, L.,Liu, F.,Klusemann, B. (2023)
In: Journal of Materials Engineering and Performance, Vol. 32, 2, 577-586, Springer, New York, NY. - journal articleFeasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625Amavisca, C.V.,Bergmann, L.,de L.Lessa, C.R.,Schroeder, J.G.,Ramos, F.D.,Lemos, G.V.B.,Reguly, A.,Klusemann, B. (2023)
In: Scientific Reports, Vol. 13, 10669, Springer Nature, London. - journal articleApplication of friction surfacing for solid state additive manufacturing of cylindrical shell structuresKallien, Z.,Rath, L.,Roos, A.,Klusemann, B. (2023)
In: Additive Manufacturing Letters, Elsevier, Amsterdam. - journal articleDeep Rolling for Tailoring Residual Stresses of AA2024 Sheet MetalsLehmann, J.,Keller, S.,Esterl, F.,Kashaev, N.,Klusemann, B.,Ben Khalifa, N. (2023)
In: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering, Vol. 3, 352-362. - journal articleExperimental evaluation of Refill friction Stir spot Welds (RFSSW) as crack arrest features in co-consolidated thermoplastic laminatesSioutis, I.,Tserpes, K.,Tsiangou, E.,Boutin, H.,Allegre, F.,Blaga, L. (2023)
In: Composite Structures, Vol. 309, 116754, Elsevier, London. - journal articleApplication of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloyChen, T.,Fu, B.,Shen, J.,Suhuddin, U.F.H.R.,Wiese, B.,Huang, Y.,Wang, M.,dos Santos, J.F.,Bergmann, J.P.,Klusemann, B. (2023)
In: Journal of Magnesium and Alloys, Elsevier, Amsterdam. - journal articleMicrostructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusionSuhuddin, U.F.H.,Rath, L.,Halak, R.M.,Klusemann, B. (2023)
In: Materials Characterization, Vol. 205, 113252, Elsevier, New York. - journal articleProcess parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by Friction SurfacingBrandes, A.C.,Roos, A.,Klusemann, B.,Martins, J.P.,dos Santos, J.F.,Carvalho, A.L.M. (2023)
In: Journal of Materials Research and Technology : JMRT, Vol. 27, 7593-7605, Elsevier, Rio de Janeiro. - journal articleDeformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen formingSala, S.T.,Bock, F.E.,Pöltl, D.,Klusemann, B.,Huber, N.,Kashaev, N. (2023)
In: Journal of Intelligent Manufacturing, Springer Science + Business Media B.V. - journal articleFriction surfacing of aluminum to steel: influence of different substrate surface topographiesRoos, A.,Metternich, F.,Kallien, Z.,Baumann, J.,Ehrich, J.,Kipp, M.,Hanke, S.,Biermann, D.,Klusemann, B. (2023)
In: Materials & Design, Vol. 235, 112390, Elsevier, Oxford. - journal articleAnalysis of a phase-field finite element implementation for precipitationSafi, A.R.,Chafle, R.,Klusemann, B. (2023)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 22, 1, e202200238, Wiley, Weinheim. - journal articleRefill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfideSchäfer, H.,Blaga, L.A.,Stöver, E.,Klusemann, B. (2023)
In: Thin-Walled Structures, Vol. 191, 111037, Elsevier, Amsterdam. - journal articleCorrelation of microstructure and local mechanical properties along build direction for multi-layer friction surfacing of aluminum alloysKallien, Z.,Hoffmann, M.,Roos, A.,Klusemann, B. (2023)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 75, 4212-4222, Springer, New York. - journal articleMicrostructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parametersde Castro, C.C.,Shen, J.,dos Santos, J.F.,Klusemann, B. (2023)
In: Journal of Materials Processing Technology, Vol. 318, 118018, Elsevier, Amsterdam.
2022
- journal articleEffect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steelBergmann, L.,Batistão, B.,de Alcantara, N.,Gargarella, P.,Klusemann, B. (2022)
In: Welding in the World, Vol. 66, 9, 1747-1756, Springer, Berlin. - journal articleCoupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress PredictionPozdnyakov, V.,Keller, S.,Kashaev, N.,Klusemann, B.,Oberrath, J. (2022)
In: Metals, Vol. 12, 1, 107, MDPI, Basel. - journal articleChanges in processing characteristics and microstructural evolution during friction extrusion of aluminumHalak, R.,Rath, L.,Suhuddin, U.,dos Santos, J.,Klusemann, B. (2022)
In: International Journal of Material Forming, Vol. 15, 3, 24, Springer, Paris. - journal articleTailoring powder strengths for enhanced quality of cold sprayed Al6061 depositsHuang, C.,List, A.,Shen, J.,Fu, B.,Yin, S.,Chen, T.,Klusemann, B.,Gärtner, F.,Klassen, T. (2022)
In: Materials & Design, Vol. 215, 110494, Elsevier, Oxford. - journal articleMitigating the susceptibility to intergranular corrosion of alloy 625 by friction-stir weldingLemos, G.V.B.,Farina, A.B.,Piaggio, H.,Bergmann, L.,Ferreira, J.Z.,dos Santos, J.F.,Vander Voort, G.,Reguly, A. (2022)
In: Scientific Reports, Vol. 12, 1, 3482, Springer Nature, London. - journal articleEffect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheetsSala, S.,Keller, S.,Chupakhin, S.,Pöltl, D.,Klusemann, B.,Kashaev, N. (2022)
In: Journal of Materials Processing Technology, Vol. 305, 117578, Elsevier, Amsterdam. - journal articleFundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturingSoujon, M.,Kallien, Z.,Roos, A.,Zeller-Plumhoff, B.,Klusemann, B. (2022)
In: Materials & Design, Vol. 219, 110786, Elsevier, Oxford. - journal articleExperimental and numerical investigation of laser beam-welded Al–Cu–Li joints using micro-mechanical characteristicsExamilioti, T.,Papanikos, P.,Kashaev, N.,Klusemann, B.,Alexopoulos, N. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 19, 2431-2446, Elsevier, Rio de Janeiro. - journal articleA multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloyWang, J.,Fu, B.,Shen, J.,Bergmann, L.,Lu, X.,dos Santos, J.,Klusemann, B. (2022)
In: Journal of Materials Processing Technology, Vol. 307, 117679, Elsevier, Amsterdam. - journal articleThe effect of prior adhesive bonding on the corrosion behavior of AA2024 FSWed single lap jointsCharalampidou, C.,Braga, D.,Bergmann, L.,Kourkoulis, S.,da Silva, L.,Infante, V.,dos Santos, J.,Moreira, P.,Alexopoulos, N. (2022)
In: Mechanics of Materials, Vol. 164, 104122, Elsevier, Amsterdam. - journal articleCombined experimental-numerical analysis of the temperature evolution and distribution during friction surfacingKallien, Z.,Klusemann, B. (2022)
In: Surface and Coatings Technology, Vol. 437, 128350, Elsevier, Amsterdam. - journal articleTool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheetsde Castro, C.,Shen, J.,Plaine, A.,Suhuddin, U.,de Alcantara, N.,dos Santos, J.,Klusemann, B. (2022)
In: Journal of Materials Research and Technology : JMRT, Vol. 20, 857-866, Elsevier, Rio de Janeiro. - journal articleDataset from healthy and defective spot welds in refill friction stir spot welding using acoustic emissionDahmene, F.,Yaacoubi, S.,El Mountassir, M.,Porot, G.,Masmoudi, M.,Nennig, P.,Suhuddin, U.,dos Santos, J. (2022)
In: Data in Brief, Vol. 45, 108750, Elsevier, Amsterdam. - journal articleMicroscale Damage Evolution and Failure Behavior of Metal–Composite Friction Spot Joints: Modelling and Experimental AnalysesAndré, N.M.,Alessio, R.P.,dos Santos, J.F.,Amancio-Filho, S.T. (2022)
In: Metals, Vol. 12, 12, 2080, MDPI, Basel. - journal articleComparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequencesSu, Y.,Li, W.,Shen, J.,Bergmann, L.,dos Santos, J.F.,Klusemann, B.,Vairis, A. (2022)
In: Materials Science and Engineering: A, Vol. 859, 144227, Elsevier, Amsterdam. - journal articleNumerical investigation of dissimilar friction stir welding of AISI 304L and 410S stainless steelsCruz da Silva, Y.,Caminha Andrade, T.,Vieira de Oliveira Júnior, F.,dos Santos, J.,Marcondes, F.,Miranda, H.,Silva, C. (2022)
In: The International Journal of Advanced Manufacturing Technology, Vol. 121, 3-4, 2721-2733, Springer, London. - journal articleEffects of semi-solid structure on interface formation of dissimilar aluminum to galvanized steel welds produced by load-controlled Refill Friction Stir Spot WeldingFerrari, V.R.,Coury, F.G.,Suhuddin, U.F.H.,Alcântara, N.G.,dos Santos, J.F.,Ohashi, R.,Fujimoto, M.,Koga, G.Y. (2022)
In: Journal of Manufacturing Processes, Vol. 84, 298-315, Elsevier, Dearborn, MI. - journal articleHeterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloyEscobar, J.,Gwalni, B.,Olszta, M.,Silverstein, J.,Ajantiwalay, T.,Overman, N.,Fu, W.,Li, Y.,Bergmann, L.,Maawad, E.,Klusemann, B.,dos Santos, J.,Devaraj, A. (2022)
In: Journal of Alloys and Compounds, Vol. 928, 167007, Elsevier, Lausanne. - journal articleInfluence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental–numerical studySandmann, P.,Keller, S.,Kashaev, N.,Ghouse, S.,Hooper, P.,Klusemann, B.,Davies, C. (2022)
In: Additive Manufacturing, Vol. 60, 103204, Elsevier, Amsterdam. - journal articleModeling of temperature- and strain-driven intermetallic compound evolution in an Al–Mg system via a multiphase-field approach with application to refill friction stir spot weldingRaza, S.,Mittnacht, T.,Diyoke, G.,Schneider, D.,Nestler, B.,Klusemann, B. (2022)
In: Journal of the Mechanics and Physics of Solids, Vol. 169, 105059, Elsevier Science, Kidlington.
Zur Publikation2021
- journal articleExperimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloySun, R.,Keller, S.,Zhu, Y.,Guo, W.,Kashaev, N.,Klusemann, B. (2021)
In: International Journal of Fatigue, Vol. 145, 106081, Elsevier, Oxford. - journal articleApplication of stress intensity factor superposition in residual stress fields considering crack closureKeller, S.,Klusemann, B. (2021)
In: Engineering Fracture Mechanics, Vol. 243, 107415, Elsevier, Kidlington. - journal articleExperimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloysBock, F.,Herrnring, J.,Froend, M.,Enz, J.,Kashaev, N.,Klusemann, B. (2021)
In: Journal of Manufacturing Processes, Vol. 64, 982-995, Elsevier, Dearborn, MI. - journal articleProbing underlying mechanisms for pcBN tool decay during friction stir welding of nickel-based alloysVicharapu, B.,Lemos, G.,Bergmann, L.,dos Santos, J.,De, A.,Clarke, T. (2021)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 18, e2455, Associacao Brasileira de Metalurgia, Sao Paulo. - journal articleHydrothermal aging of friction riveted thermoplastic composite joints for aircraft applicationsBorba, N.,dos Santos, J.,Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 255, 112871, Elsevier, London. - journal articlePhase-field modelling for fatigue crack growth under laser shock peening-induced residual stressesSeiler, M.,Keller, S.,Kashaev, N.,Klusemann, B.,Kästner, M. (2021)
In: Archive of Applied Mechanics, Vol. 91, 8, 3709-3723, Springer, Berlin. - journal articleHybrid Modelling by Machine Learning Corrections of Analytical Model Predictions towards High-Fidelity Simulation SolutionsBock, F.,Keller, S.,Huber, N.,Klusemann, B. (2021)
In: Materials, Vol. 14, 8, 1883, MDPI, Basel. - journal articleFriction-based processes for hybrid multi-material joiningLambiase, F.,Balle, F.,Blaga, L.,Liu, F.,Amancio-Filho, S. (2021)
In: Composite Structures, Vol. 266, 113828, Elsevier, London. - journal articleCompression Behaviour of Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.,Ventzke, V.,Neto, L.,Riekehr, S.,Martina, F.,Kashaev, N.,Hönnige, J.,Williams, S.,Klusemann, B. (2021)
In: Metals, Vol. 11, 6, 877, MDPI, Basel. - journal articleModeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid techniqueHerrnring, J.,Sundman, B.,Staron, P.,Klusemann, B. (2021)
In: Acta Materialia, Vol. 215, 117053, Elsevier, Amsterdam. - journal articleInfluence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing depositsEhrich, J.,Roos, A.,Klusemann, B.,Hanke, S. (2021)
In: Materials Science and Engineering: A, Vol. 819, 141407, Elsevier, Amsterdam. - journal articleRecent progress on control strategies for inherent issues in friction stir weldingMeng, X.,Huang, Y.,Cao, J.,Shen, J.,Dos Santos, J. (2021)
In: Progress in Materials Science, Vol. 115, 100706, Elsevier, Oxford. - journal articleTailoring of residual stresses by specific use of defined prestress during laser shock peeningSchwab, K.,Keller, S.,Kashaev, N.,Klusemann, B. (2021)
In: Journal of Materials Processing Technology, Vol. 295, 117154, Elsevier, Amsterdam. - journal articleEffect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198Examilioti, T.,Kashaev, N.,Ventzke, V.,Klusemann, B.,Alexopoulos, N. (2021)
In: Materials Characterization, Vol. 178, 111257, Elsevier, New York. - journal articleInvestigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel®625Landell, R.,de Lima Lessa, C.,Bergmann, L.,dos Santos, J.,Kwietniewski, C.,Klusemann, B. (2021)
In: Welding in the World, Vol. 65, 393-403, Springer, Berlin. - journal articleAssessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy JointsWen, Q.,Li, W.,Patel, V.,Bergmann, L.,Klusemann, B.,dos Santos, J. (2021)
In: Acta Metallurgica Sinica (English Letters), Vol. 34, 125-134, Springer, Beijing. - journal articleImproved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot weldingFu, B.,Shen, J.,Suhuddin, U.,Chen, T.,dos Santos, J.,Klusemann, B.,Rethmeier, M. (2021)
In: Scripta Materialia, Vol. 203, 114113, Elsevier, Amsterdam. - journal articleMicrostructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery applicationGera, D.,Fu, B.,Suhuddin, U.,Plaine, A.,Alcantara, N.,dos Santos, J.,Klusemann, B. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 13, 2272-2286, Elsevier, Rio de Janeiro. - journal articleComparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-jointsSu, Y.,Li, W.,Shen, J.,Fu, B.,dos Santos, J.,Klusemann, B.,Vairis, A. (2021)
In: Materials Science and Engineering: A, Vol. 823, 141698, Elsevier, Amsterdam. - journal articleRevealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steelFu, B.,Shen, J.,Suhuddin, U.,Pereira, A.,Maawad, E.,dos Santos, J.,Klusemann, B.,Rethmeier, M. (2021)
In: Materials & Design, Vol. 209, 109997, Elsevier, Oxford. - journal articleMultimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloyEscobar, J.,Gwalani, B.,Olszta, M.,Silverstein, J.,Overman, N.,Bergmann, L.,dos Santos, J.F.,Staron, P.,Maawad, E.,Klusemann, B.,Mathaudhu, S.,Devaraj, A. (2021)
In: Journal of Alloys and Compounds, Vol. 887, 161351, Elsevier, Lausanne. - journal articleProcess Transferability of Friction Riveting of AA2024-T351/Polyetherimide (PEI) Joints Using Hand-Driven, Low-Cost Drilling EquipmentFeier, A.,Becheru, A.,Brîndușoiu, M.,Blaga, L. (2021)
In: Processes, Vol. 9, 8, 1376, MDPI, Basel. - journal articleEffect of the Gap Width in AZ31 Magnesium Alloy Joints Obtained by Friction Stir WeldingChiuzuli, F.,Batistão, B.,Bergmann, L.,Alcantara, N.,dos Santos, J.,Klusemann, B.,Gargarella, P. (2021)
In: Journal of Materials Research and Technology : JMRT, Vol. 15, 5297-5306, Elsevier, Rio de Janeiro. - journal articleSimulation of fatigue crack growth in residual-stress-afflicted specimen with a phase-field modelSeiler, M.,Keller, S.,Kashaev, N.,Klusemann, B.,Kästner, M. (2021)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 21, 1, e202100210, Wiley, Weinheim. - journal articleExperimental and Numerical Analysis of Refill Friction Stir Spot Welding of Thin AA7075-T6 SheetsJanga, V.S.R.,Awang, M.,Yamin, M.F.,Suhuddin, U.F.H.,Klusemann, B.,Dos Santos, J.F. (2021)
In: Materials, Vol. 14, 23, 7485, MDPI, Basel. - journal articleInfluence of LDH conversion coatings on the adhesion and corrosion protection of friction spot-joined AA2024-T3/CF-PPSBouali, A.,André, N.,Silva Campos, M.,Serdechnova, M.,Dos Santos, J.,Amancio-Filho, S.,Zheludkevich, M. (2021)
In: Journal of Materials Processing Technology, Vol. 67, 197-210, Elsevier, Amsterdam.
2020
- journal articleInvestigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061Ferreira, A.,Campanelli, L.,Suhuddin, U.,Alcantara, N.,dos Santos, J. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 106, 3523-3531, Springer, London. - journal articleDurability of Metal-Composite Friction Spot Joints under Environmental ConditionsGoushegir, S.,Scharnagl, N.,dos Santos, J.,Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1144, MDPI, Basel. - journal articleOn the influence of laser beam welding parameters for autogenous AA2198 welded jointsExamilioti, T.,Kashaev, N.,Enz, J.,Klusemann, B.,Alexopoulos, N. (2020)
In: The International Journal of Advanced Manufacturing Technology, Vol. 110, 2079-2092, Springer, London. - journal articleOn the application of laser shock peening for retardation of surface fatigue cracks in laser beam‐welded AA6056Kashaev, N.,Ushmaev, D.,Ventzke, V.,Klusemann, B.,Fomin, F. (2020)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, 7, 1500-1513, Blackwell, Oxford. - journal articleThe Influence of Laser Shock Peening on Fatigue Properties of AA2024-T3 Alloy with a Fastener HoleSikhamov, R.,Fomin, F.,Klusemann, B.,Kashaev, N. (2020)
In: Metals, Vol. 10, 4, 495, MDPI, Basel. - journal articleNumerical residual strength prediction of stationary shoulder friction stir welding structuresScheider, I.,Barbini, A.,dos Santos, J. (2020)
In: Engineering Fracture Mechanics, Vol. 230, 107010, Elsevier, Kidlington. - journal articleCombined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peeningSandmann, P.,Nielsen, M.,Keller, S.,Maawad, E.,Staron, P.,Klusemann, B. (2020)
In: Strain : the journal of the British Society for Strain Measurement, Vol. 56, 4, e12338, Wiley, Oxford. - journal articleDiffusion-driven microstructure evolution in OpenCalphadHerrnring, J.,Sundman, B.,Klusemann, B. (2020)
In: Computational Materials Science, Vol. 175, 109236, Elsevier, Amsterdam. - journal articleLow-velocity impact response of friction riveted joints for aircraft applicationBorba, N.Z.,Körbelin, J.,Fiedler, B.,dos Santos, J.F.,Amancio-Filho, S.T. (2020)
In: Materials and Design, Vol. 186, 108369, Elsevier, Oxford. - journal articleMicrostructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal depositionFroend, M.,Ventzke, V.,Dorn, F.,Kashaev, N.,Klusemann, B.,Enz, J. (2020)
In: Materials Science and Engineering A, Vol. 772, 138635, Elsevier, Amsterdam. - journal articleMechanical integrity of friction-riveted joints for aircraft applicationsBorba, N.,Kötter, B.,Fiedler, B.,dos Santos, J.F.,Amancio-Filho, S.T. (2020)
In: Composite Structures, Vol. 232, 111542, Elsevier. - journal articleExperimentally established correlation of friction surfacing process temperature and deposit geometryKallien, Z.,Rath, L.,Roos, A.,Klusemann, B. (2020)
In: Surface and Coatings Technology, Vol. 397, 126040, Elsevier, Amsterdam. - journal articleSingle-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performancePina Cipriano, G.,Ahiya, A.,dos Santos, J.,Vilaça, P.,Amancio-Filho, S. (2020)
In: Welding in the World, Vol. 64, 47-58, Springer, Berlin. - journal articleMultiphase-field modeling of temperature-driven intermetallic compound evolution in an Al–Mg system for application to solid-state joining processesRaza, S.,Klusemann, B. (2020)
In: Modelling and Simulation in Materials Science Engineering, Vol. 28, 8, 085003, IOP Publishing, Bristol. - journal articleImpact resistance of metal-composite hybrid joints produced by frictional heatAndré, N.,dos Santos, J.,Amancio-Filho, S. (2020)
In: Composite Structures, Vol. 233, 111754, Elsevier, London. - journal articleRefill friction stir spot welding of AA6082-T6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behaviorHessel Silva, B.,Zepon, G.,Bolfarini, C.,dos Santos, J. (2020)
In: Materials Science and Engineering: A, Vol. 773, 138724, Elsevier, Amsterdam. - journal articleNumerical investigation of the influence of FSW parameters on the heat and mass transfer of austenitic stainless steelsda Silva, Y.,Oliveira Júnior, F.,dos Santos, J.,Marcondes, F.,Silva, C. (2020)
In: Welding in the World, Vol. 64, 4, 2019-2032, Springer, Berlin. - journal articleMicrostructure Features and Mechanical Properties of Double-Sided Friction Stir Welded Joints of AA2050-T84 Thick PlatesSantini, F.,Plaine, A.,Afonso, C.,Bergmann, L.,Alcantara, N.,dos Santos, J.,Miyazaki, M. (2020)
In: Materials Research, Vol. 23, 6, e20200309, Universidade Federal de Sao Carlos, Sao Carlos. - journal articleAn investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid jointsFeistauer, E.,dos Santos, J.,Amanci-Filho, S. (2020)
In: Welding in the World, Vol. 64, 1481-1495, Springer, Berlin. - journal articleProcess-Related Changes in Polyetherimide Joined by Friction-Based Injection Clinching Joining (F-ICJ)Abibe, A.,Sônego, M.,Canto, L.,dos Santos, J.,Amancio-Filho, S. (2020)
In: Materials, Vol. 13, 5, 1027, MDPI, Basel. - journal articlePrediction of the mechanical and failure behavior of metal-composite hybrid joints using cohesive surfacesAlessio, R.,Andre, N.,Goushegir, S.,dos Santos, J.,Mazzaferro, J.,Amancio-Filho, S.T. (2020)
In: Materials Today Communications, Vol. 24, 101205, Elsevier, Amsterdam. - journal articleCharacterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steelBatistao, B.,Bergmann, L.,Gargarela, P.,Alcantara, N.,dos Santos, J.,Klusemann, B. (2020)
In: Journal of Materials Research and Technology, Vol. 9, 6, 15132-15142, Elsevier, Rio de Janeiro. - journal articleMechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding : Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-SchweißenYamin, M.,Awang, M.,Suhuddin, U.,Sallih, N.,Klusemann, B.,Dos Santos, J. (2020)
In: Materials Science and Engineering Technology - Materialwissenschaft und Werkstofftechnik, Vol. 51, 6, 830-835, Wiley, Weinheim. - journal articleOn the stability of the passive Ti-6Al-4V film of friction stir welds with stainless steel: Effect of not native metal speciesSilva, D.,Campanelli, L.,Bergmann, L.,dos santos, J.,Hammer, P.,Della Rovere, C.,Aquino, J. (2020)
In: Electrochimica Acta, Vol. 358, 136900, Elsevier, Kidlington.
2019
- journal articleA study of the parameters influencing mechanical properties and the fatigue performance of refill friction stir spot welded AlMgSc alloyLage, S.,Campanelli, L.,Guerra, A.,Shen, J.,dos Santos, J.,da Silva, P.,Bolfarini, C. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 100, 101-110, Springer, London. - journal articleTwo-step simulation approach for laser shock peeningPozdnyakov, V.,Keller, S.,Kashaev, N.,Klusemann, B.,Oberrath, J. (2019)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 19, 1, e201900497, Wiley. - journal articleFatigue performance of hybrid overlap friction stir welding and adhesive bonding of an Al‐Mg‐Cu alloyBraga, D.F.O.,Maciel, R.,Bergmann, L.,da Silva, L.F.M.,Infante, V.,dos Santos, J.F.,Moreira, P.M.G.P. (2019)
In: Fatigue and Fracture of Engineering Materials and Structures, Vol. 42, 6, 1262-1270, Blackwell, Oxford. - journal articleA Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials MechanicsBock, F.E.,Aydin, R.C.,Cyron, C.J.,Huber, N.,Kalidindi, S.R.,Klusemann, B. (2019)
In: Frontiers in Materials, Vol. 6, 110, Frontiers Media, Lausanne. - journal articleEffect of Laser Peening Process Parameters and Sequences on Residual Stress ProfilesKallien, Z.,Keller, S.,Ventzke, V.,Kashaev, N.,Klusemann, B. (2019)
In: Metals, Vol. 9, 6, 655, MDPI Publishing, Basel. - journal articleResidual stress characterization in friction stir welds of alloy 625Lemos, G.V.B.,Farina, A.B.,Menezes Nunes, R.,Pereira da Cunha, P.H.C.,Bergmann, L.,dos Santos, J.F.,Reguly, A. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 3, 2528-2537, Brazilian Metallurgical, Materials and Mining Association. - journal articleNumerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured StructuresAbbaszadeh, M.,Hönnige, J.R.,Martina, F.,Neto, L.,Kashaev, N.,Colegrove, P.,Williams, S.,Klusemann, B. (2019)
In: Journal of Materials Engineering and Performance, Vol. 28, 8, 4931-4942, ASM International, Materials Park, OH. - journal articleThermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiancesFroend, M.,Ventzke, V.,Kashaev, N.,Klusemann, B.,Enz, J. (2019)
In: Additive Manufacturing, Vol. 29, 100800, Elsevier, Amsterdam. - journal articleInfluence of Cu/Li ratio on the microstructure evolution of bobbin-tool friction stir welded Al–Cu–Li alloysEntringer, J.,Reimann, M.,Norman, A.,dos Santos, J.F. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 2031-2040, Brazilian Metallurgical, Materials and Mining Association. - journal articleA review on direct assembly of through‐the‐thickness reinforced metal–polymer composite hybrid structuresFeistauer, E.,dos Santos, J.,Amancio-Filho, S. (2019)
In: Polymer Engineering & Science, Vol. 59, 4, 661-674, Wiley, Hoboken, NY. - journal articleEffects of Friction Surfacing on the Characteristics of Consumable Rods of Ti-6Al-4Vdo Vale, N.,Fitseva, V.,Hanke, S.,Filho, S.,dos Santos, J. (2019)
In: Materials Research : Revista Brasileira de Materiais, Vol. 22, e20180888, Universidade Federal de Sao Carlos, Sao Carlos. - journal articleComparison of Friction Surfacing Process and Coating Characteristics of Ti-6Al-4V and Ti Grade 1Vale, N.,Fitseva, V.,Urtiga Filho, S.,dos santos, J.,Hanke, S. (2019)
In: JOM: The Journal of the Minerals, Metals and Materials Society, Vol. 71, 4339-4348, Springer, New York. - journal articleApplication of response surface methodology for optimization of hybrid friction diffusion bonding of tube-to-tube-sheet connections in coil-wound heat exchangersAlba, D.,Roos, A.,Wimmer, G.,Gonzalez, A.,Hanke, S.,Dos Santos, J. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 2, 1701-1711, Elsevier, Rio de Janeiro. - journal articleThermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid JointsSonego, M.,Abibe, A.,Canevarolo, S.,Bettini, S.,dos Santos, J.,Canto, L.,Amancio-Filho, S. (2019)
In: International Polymer Processing, Vol. 34, 1, 100-110, Hanser, München. - journal articleThe effect of grain boundary precipitates on stress corrosion cracking in a bobbin tool friction stir welded Al-Cu-Li alloyEntringer, J.,Meisnar, M.,Reimann, M.,Blawert, C.,Zheludkevich, M.,dos Santos, J.F. (2019)
In: Materials Letters: X, Vol. 2, 100014, Elsevier. - journal articleEvaluation of Joint Formation and Mechanical Performance of the AA7075-T6/CFRP Spot Joints Produced by Frictional HeatManente Andre, N.,dos Santos, J.F.,Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 891, MDPI Publishing, Basel. - journal articleEffect of welding speed on friction stir welds of GL E36 shipbuilding steelCosta Pereira da Cunha, P.H.,Braga, Lemos, G,V.,Bergmann, L.,Reguly, A.,dos Santos, J.F.,Marinho, R.R.,Piza Paes, M.T. (2019)
In: Journal of Materials Research and Technology : JMRT, Vol. 8, 1, 1041-1051, Brazilian Metallurgical, Materials and Mining Association. - journal articleEffect of friction spot welding parameters on the joint formation and mechanical properties of Al to CuCardillo, M.E.B.,Shen, J.,de Alcantara, N.G.,Afonso, C.R.M.,dos Santos, J.F. (2019)
In: Welding in the World, Vol. 63, 1, 33-41, Springer/Pergamon Press, Oxford. - journal articleMicrostructure and Mechanical Performance of Additively Manufactured Aluminum 2024-T3/Acrylonitrile Butadiene Styrene Hybrid Joints Using an AddJoining TechniqueFalck, R.,dos Santos, J.F.,Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 6, 864, MDPI Publishing, Basel. - journal articleThe Influence of Clamping Pressure on Joint Formation and Mechanical Performance of Ti6Al4V/CF-PEEK Friction-Riveted JointsZocoller Borba, N.,dos Santos, J.F.,Amancio-Filho, S.T. (2019)
In: Materials, Vol. 12, 5, 745, MDPI Publishing, Basel. - journal articleApplication of design of experiments for laser shock peening process optimizationChupakhin, S.,Klusemann, B.,Huber, N.,Kashaev, N. (2019)
In: The International Journal of Advanced Manufacturing Technology, Vol. 102, 5 - 8, 1567-1581, Springer, London. - journal articleFundamentals of Force-Controlled Friction Riveting: Part II - Joint Global Mechanical Performance and Energy EfficiencyCipriano, G.P.,Blaga, L.A.,dos Santos, J.F.,Vilaca, P.,Amancio-Filho, S.T. (2019)
In: Materials, Vol. 11, 12, 2489, MDPI Publishing, Basel. - journal articleIntergranular corrosion evaluation of friction stir welded AISI 410S ferritic stainless steelQueiroz Caetano, G.de,Carvalho Silva, C.,Motta, M.F.,Miranda, H.C.,Farias, J.P.,Bergmann, L.A.,dos Santos, J.F. (2019)
In: Journal of Materials Science and Technology, Vol. 8, 2, 1878-1887, Elsevier / Allerton, Amsterdam, New York, NY. - journal articleExperimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peeningKeller, S.,Horstmann, M.,Kashaev, N.,Klusemann, B. (2019)
In: International Journal of Fatigue, Vol. 124, 265-276, Elsevier. - journal articleComputational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive modelRaza, S.H.,Soyarslan, C.,Bargmann, S.,Klusemann, B. (2019)
In: Computer Methods in Applied Mechanics and Engineering, Vol. 344, 887-909, Elsevier, Amsterdam. - journal articleThe scaled boundary finite element method for computational homogenization of heterogeneous mediaTalebi, H.,Silani, M.,Klusemann, B. (2019)
In: International Journal for Numerical Methods in Engineering, Vol. 118, 1, 1-17, Wiley.
2018
- journal articleInfluence of Alloys Position, Rolling and Welding Directions on Properties of AA2024/AA7050 Dissimilar Butt Weld Obtained by Friction Stir WeldingBarbini, A.,Carstensen, J.,dos Santos, J.F. (2018)
In: Metals, Vol. 8, 4, 202, MDPI Publishing, Basel. - journal articleProcess development for wire-based laser metal deposition of 5087 aluminium alloy by using fibre laserFroend, M.,Riekehr, S.,Kashaev, N.,Klusemann, B.,Enz, J. (2018)
In: Journal of Manufacturing Processes, Vol. 34 A, 721-732, Elsevier, Dearborn, MI. - journal articleEffect of reverse material flow on the microstructure and performance of friction stir welded T-joints of an Al-Mg alloyFeistauer, E.E.,Bergmann, L.A.,dos Santos, J.F. (2018)
In: Materials Science and Engineering A, Vol. 731, 454-464, Elsevier. - journal articleGeneration of 3D representative volume elements for heterogeneous materials: A reviewBargmann, S.,Klusemann, B.,Markmann, J.,Schnabel, J.E.,Schneider, K.,Soyarslan, C.,Wilmers, J. (2018)
In: Progress in Materials Science, Vol. 96, 322-384, Elsevier, Oxford. - journal articleAddJoining: a novel additive manufacturing approach for layered metal-polymer hybrid structuresFalck, R.,Goushegir, S.M.,dos Santos, J.F.,Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 217, 211-214, Elsevier. - journal articleTexture Development and Material Flow Behavior During Refill Friction Stir Spot Welding of AlMgScShen, J.,Lage, S.B.M.,Suhuddin, U.F.H.,Bolfarini, C.,dos Santos, J.F. (2018)
In: Metallurgical and Materials Transactions A, Vol. 49, 1, 241-254, Springer, Warrendale, PA. - journal articleImproving weld formability by a novel dual-rotation bobbin tool friction stir weldingWang, F.F.,Li, W.Y.,Shen, J.,Wen, Q.,dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 135-139, Elsevier / Allerton, Amsterdam, New York, NY. - journal articleEstudo da Sensitizacao em Juntas Soldadas de Inconel® 625 Produzidas Atraves da Soldagem por Friccao e Mistura Mecanica - Sensitization Study in Friction Stir Welds of Inconel®625Martinazzi, D.,Lemos, G.V.B.,Cardoso, H.R.P.,dos Santos, R.E.,Ferreira, J.Z.,Bergmann, L.,dos Santos, J.F.,Reguly, A. (2018)
In: Periodico Tche Quimica, Vol. 15, 29, 53-60, Tche Quimica Group, Porto Alegre. - journal articleMicrostructure Evolution and Mechanical Properties of Keyhole Repair Welds in AA 2219-T851 using Refill Friction Stir Spot WeldingReimann, M.,Goebel, J.,dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5220-5226, ASM International, Materials Park, OH. - journal articleComposite surface pre-treatments: improvement on adhesion mechanisms and mechanical performance of metal-composite friction spot joints with additional film interlayerManente Andre, N.,Goushegir, S.M.,Scharnagl, N.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2018)
In: The Journal of Adhesion, Vol. 94, 9, 723-742, Taylor & Francis, New York. - journal articleExperimental and numerical investigation of residual stresses in laser shock peened AA2198Keller, S.,Chupakhin, S.,Staron, P.,Maawad, E.,Kashaev, N.,Klusemann, B. (2018)
In: Journal of Materials Processing Technology, Vol. 255, 294-307, Elsevier. - journal articleResidual stress and microstructural features of friction-stir-welded GL E36 shipbuilding steelLemos, G.V.B.,Cunha, P.H.C.P.,Nunes, R.M.,Bergmann, L.,dos Santos, J.F.,Clarke, T. (2018)
In: Materials Science and Technology, Vol. 34, 1, 95-103, Taylor & Francis/Maney, London. - journal articleDirect-Friction Riveting of polymer composite laminates for aircraft applicationsBorba, N.Z.,Blaga, L.,dos Santos, J.F.,Amancio-Filho, S.T. (2018)
In: Materials Letters, Vol. 215, 31-34, Elsevier. - journal articleInfluence of rotation speed and axial force on the friction stir welding of AISI 410S ferritic stainless steelde Queiroz Caetano, G.,Silva, C.C.,Motta, M.F.,Miranda, H.C.,Farias, J.P.,Bergmann, L.A.,dos Santos, J.F. (2018)
In: Journal of Materials Processing Technology, Vol. 262, 430-436, Elsevier, Amsterdam. - journal articleInfluence of Cu/Li Ratio on the Welding Forces and Mechanical Properties of Two Bobbin Tool Friction Stir Welded Al-Cu-Li AlloysGoebel, J.,Reimann, M.,dos Santos, J.F. (2018)
In: Journal of Materials Engineering and Performance, Vol. 27, 10, 5212-5219, ASM International, Materials Park, OH. - journal articleFundamentals of Force-Controlled Friction Riveting: Part I - Joint Formation and Heat DevelopmentCipriano, G.P.,Blaga, L.A.,dos Santos, J.F.,Vilaca, P.,Amancio-Filho, S.T. (2018)
In: Materials, Vol. 11, 11, 2294, MDPI Publishing, Basel. - journal articleSurface modification methods for fatigue properties improvement of laser welded Ti64 butt jointsFomin, F.,Klusemann, B.,Kashaev, N. (2018)
In: Procedia Structural Integrity, Vol. 13, 273-278, Elsevier, Amsterdam. - journal articleExperimental Investigation of Temperature Distribution during Wire-Based Laser Metal Deposition of the Al-Mg Alloy 5087Froend, M.,Bock, F.,Ventzke, V.,Riekehr, S.,Kashaev, N.,Klusemann, B.,Enz, J. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 988-994, Trans Tech Publications, Aedermannsdorf. - journal articleInfluence of a non-rotating shoulder on heat generation, microstructure and mechanical properties of dissimilar AA2024/AA7050 FSW jointsBarbini, A.,Carstensen, J.,dos Santos, J.F. (2018)
In: Journal of Materials Science and Technology, Vol. 34, 1, 119-127, Elsevier / Allerton, Amsterdam, New York, NY. - journal articleUnderstanding precipitate evolution during friction stir welding of Al-Zn-Mg-Cu alloy through in-situ measurement coupled with simulationdos Santos, J.F.,Staron, P.,Fischer, T.,Robson, J.D.,Kostka, A.,Colegrove, P.,Wang, H.,Hilgert, J.,Bergmann, L.,Huetsch, L.L.,Huber, N.,Schreyer, A. (2018)
In: Acta Materialia, Vol. 148, 163-172, Elsevier, Amsterdam. - journal articlePrecipitation Kinetics of AA6082: An Experimental and Numerical InvestigationHerrnring, J.,Kashaev, N.,Klusemann, B. (2018)
In: Materials Science Forum, THERMEC 2018, Vol. 941, 1411-1417, Trans Tech Publications, Aedermannsdorf. - journal articleMicrostructure and microhardness of wire-based laser metal deposited AA5087 using an Ytterbium fibre laserFroend, M.,Ventzke, V.,Riekehr, S.,Kashaev, N.,Klusemann, B.,Enz, J. (2018)
In: Materials Characterization, Vol. 143, 59-67, Elsevier. - journal articleMultiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082Herrnring, J.,Staron, P.,Kashaev, N.,Klusemann, B. (2018)
In: Materialia, Vol. 3, 243-255, Elsevier, Amsterdam. - journal articleMicrostructure and hardness evolution of laser metal deposited AA5087 wall-structuresFroend, M.,Ventzke, V.,Riekehr, S.,Kashaev, N.,Klusemann, B.,Enz, J. (2018)
In: Procedia CIRP, Vol. 74, 131-135, Elsevier.
2017
- journal articleProgress in friction stir welding of Ni alloysLemos, G.V.B.,Hanke, S.,dos Santos, J.F.,Bergmann, L.,Reguly, A.,Strohaecker, T.R. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 643-657, Maney, London. - journal articleFully periodic RVEs for technological relevant composites: not worth the effort!Schneider, K.,Klusemann, B.,Bargmann, S. (2017)
In: Journal of Mechanics of Materials and Structures, Vol. 12, 4, 471-484, Mathematical Sciences Publishers, Berkeley, CA. - journal articleFiber laser welding of dissimilar titanium (Ti-6Al-4V/cp-Ti) T-joints and their laser forming process for aircraft applicationFroend, M.,Fomin, F.,Riekehr, S.,Alvarez, P.,Zubiri, F.,Bauer, S.,Klusemann, B.,Kashaev, N. (2017)
In: Optics and Laser Technology, Vol. 96, 123-131, Elsevier, Oxford. - journal articleMicrostructure evolution in refill friction stir spot weld of a dissimilar Al–Mg alloy to Zn-coated steelSuhuddin, U.F.H.,Fischer, V.,Kostka, A.,dos Santos, J.F. (2017)
In: Science and Technology of Welding and Joining, Vol. 22, 8, 658-665, Maney, London. - journal articleOn the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted JointsZocoller Borba, N.,Afonso, C.R.M.,Blaga, L.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2017)
In: Materials, Vol. 10, 2, 184, MDPI Publishing, Basel. - journal articleInfluence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4VFitseva, V.,Hanke, S.,dos Santos, J.F. (2017)
In: Materials and Manufacturing Processes, Vol. 32, 5, 557-563, Taylor & Francis, Philadelphia. - journal articleSemi-stationary shoulder bobbin tool friction stir welding of AA2198-T851Goebel, J.,Reimann, M.,Norman, A.,dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 37-45, Elsevier. - journal articleNumerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speedsBachmann, M.,Carstensen, J.,Bergmann, L.,dos Santos, J.F.,Wu, C.S.,Rethmeier, M. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 91, 1-4, 1443-1452, Springer, London. - journal articleDegradation mechanisms of pcBN tool material during Friction Stir Welding of Ni-base alloy 625Hanke, S.,Lemos, G.V.B.,Bergmann, L.,Martinazzi, D.,dos Santos, J.F.,Strohaecker, T.R. (2017)
In: Wear, Vol. A346-A377, 403-408, Elsevier, Amsterdam. - journal articleProcess Optimization and Microstructure Analysis in Refill Friction Stir Spot Welding of 3-mm-thick Al-Mg-Si Aluminum AlloySantana, L.M.,Suhuddin, U.F.H.,Oelscher, M.H.,Strohaecker, T.R.,dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 4213-4220, Springer, London. - journal articleComparative study of severe plastic deformation at elevated temperatures of two aluminium alloys during friction surfacingHanke, S.,dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 247, 257-267, Elsevier. - journal articleRefilling termination hole in AA 2198–T851 by refill friction stir spot weldingReimann, M.,Goebel, J.,Gartner, T.M.,dos Santos, J.F. (2017)
In: Journal of Materials Processing Technology, Vol. 245, 157-166, Elsevier. - journal articleMicrostructure and mechanical behavior of friction spot welded AA6181-T4/Ti6Al4V dissimilar jointsPlaine, A.H.,Suhuddin, U.F.H.,Alcantara, N.G.,dos Santos, J.F. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 92, 9-12, 3703-3714, Springer, London. - journal articleResidual Stress Evaluation in Friction Stir Welds of Inconel 625 - Avaliacao das Tensoes Residuais em Juntas Soldadas de Inconel 625 Obtidas Atraves da Soldagem por Friccao e Mistura MecanicaLemos, G.V.B.,Nunes, R.M.,Doll, P.,Bergmann, L.,Strohaecker, T.R.,dos Santos, J.F. (2017)
In: Soldagem & Inspecao, Vol. 22, 1, 35-45, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleInfluence of Rotational Speed in the Friction Surfacing of Titanium Grade 1 on Ti-6Al-4VLopes do Vale, N.,Fitseva, V.,Hanke, S.,Urtiga Filho, S.L.,dos Santos, J.F. (2017)
In: Materials Research : Revista Brasileira de Materiais, Vol. 20, 2, 830-835, Universidade Federal de Sao Carlos, Sao Carlos. - journal articleFriction riveting (‘FricRiveting’) of 6056 T6 aluminium alloy and polyamide 6: influence of rotational speed on the formation of the anchoring zone and on mechanical performanceProenca, B.C.,Blaga, L.,dos Santos, J.F.,Canto, L.B.,Amancio Filho, S.T. (2017)
In: Welding International, Vol. 31, 7, 509-518, Taylor & Francis, London. - journal articleInfluence of aluminum surface pre-treatments on the bonding mechanisms and mechanical performance of metal-composite single-lap jointsGoushegir, S.M.,dos Santos, J.F.,Amancio-Filho, S.T. (2017)
In: Welding in the world, Vol. 61, 6, 1099-1115, Springer/Pergamon Press, Oxford. - journal articleThe weld interface for friction spot welded 5052 aluminium alloyTier, M.D.,Rosendo, T.S.,Mazzaferro, J.A.,Mazzaferro, C.P.,dos Santos, J.F.,Strohaecker, T.R. (2017)
In: The International Journal of Advanced Manufacturing Technology, Vol. 90, 1-4, 267-276, Springer, London. - journal articleArtificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drillingChupakhin, S.,Kashaev, N.,Klusemann, B.,Huber, N. (2017)
In: The Journal of Strain Analysis for Engineering Design, Vol. 52, 3, 137-151, SAGE Publications, London. - journal articleA new method of hybrid friction stir welding assisted by friction surfacing for joining dissimilar Ti/Al alloyHuang, Y.,Lv, Z.,Wan, L.,Shen, J.,dos Santos, J.F. (2017)
In: Materials Letters, Vol. 207, 172-175, Elsevier. - journal articleMicrostructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot weldingReimann, M.,Goebel, J.,dos Santos, J.F. (2017)
In: Materials and Design, Vol. 132, 283-294, Elsevier. - journal articleHydrogen embrittlement under cathodic protection of friction stir welded UNS S32760 super duplex stainless steelPohl Meinhardt, C.,Scheid, A.,dos Santos, J.F.,Bergmann, L.A.,Borges, Favaro, M.,Fortis Kwietniewski, C.E. (2017)
In: Materials Science and Engineering A, Vol. 706, 48-56, Elsevier.
2016
- journal articleInterface formation and properties of friction spot welded joints of AA5754 and Ti6Al4V alloysPlaine, A.H.,Suhuddin, U.F.H.,Afonso, C.R.M.,Alcantara, N.G.,dos Santos, J.F. (2016)
In: Materials and Design, Vol. 93, 224-231, Elsevier. - journal articleAutomatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion compositesSchneider, K.,Klusemann, B.,Bargmann, S. (2016)
In: Advances in Engineering Software, Vol. 99, 177-188, Elsevier. - journal articleProcess parameter optimization in friction spot welding of AA5754 and Ti6Al4V dissimilar joints using response surface methodologyPlaine, A.H.,Gonzalez, A.R.,Suhuddin, U.F.H.,dos Santos, J.F.,Alcantara, N.G. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 85, 5, 1575-1583, Springer, London. - journal articleFailure and fracture micro-mechanisms in metal-composite single lap joints produced by welding-based joining techniquesGoushegir, S.M.,dos Santos, J.F.,Amancio-Filho, S.T. (2016)
In: Composites / A, Vol. 81, 121-128, Elsevier. - journal articleFatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distributionEffertz, P.S.,Infante, V.,Quintino, L.,Suhuddin, U.,Hanke, S.,dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 87, 381-390, Elsevier. - journal articleFatigue Crack Growth Behaviour in Friction Stir Welded Aluminium–Lithium Alloy Subjected to Biaxial LoadsRichter-Trummer, V.,Zhang, X.,Irving, P.E.,Pacchione, M.,Beltrao, M.,dos Santos, J.F. (2016)
In: Experimental Techniques, Vol. 40, 3, 921-935, Blackwell Publishing, Malden, MA. - journal articleFriction Spot Joining of aluminum alloy 2024-T3 and carbon-fiber-reinforced poly(phenylene sulfide) laminate with additional PPS film interlayer: Microstructure, mechanical strength and failure mechanismsAndre, N.M.,Goushegir, S.M.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2016)
In: Composites / B, Vol. 94, 197-208, Elsevier. - journal articleUltrasonic joining: A novel direct-assembly technique for metal-composite hybrid structuresFeistauer, E.E.,Guimaraes, R.P.M.,Ebel, T.,dos Santos, J.F.,Amancio-Filho, S.T. (2016)
In: Materials Letters, Vol. 170, 1-4, Elsevier. - journal articleInfluence of the Interlayer Film Thickness on the Mechanical Performance of AA2024-T3/CF-PPS Hybrid Joints Produced by Friction Spot Joining - Influencia da Espessura do Filme Polimerico Intermediario na Resistencia Mecanica de Juntas Hibridas de Alumínio 2024-T3 e CF-PPS Produzidas por Uniao Pontual por FriccaoAndre, N.M.,Goushegir, S.M.,dos Santos, J.F.,Canto, L.B.,Amancio Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 2-15, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleInfluence of Rotational Speed on the Microstructure and Mechanical Performance of Friction-Riveted Thermosetting Composite Joints - Influencia da Velocidade de Rotacao do Rebite na Microestrutura e no Desempenho Mecanico de Juntas de Composito Termofixo Rebitadas por FriccaoZocoller Borba, N.,Blaga, L.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 30-43, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleKeyhole closure using friction spot welding in aluminum alloy 6061–T6Reimann, M.,Gartner, T.,Suhuddin, U.,Goebel, J.,dos Santos, J.F. (2016)
In: Journal of Materials Processing Technology, Vol. 237, 12-18, Elsevier. - journal articleXPS analysis of the interface between AA2024-T3 / CF-PPS friction spot jointsGoushegir, S.M.,Scharnagl, N.,dos Santos, J.F.,Amancio-Filho, S.T. (2016)
In: Surface and Interface Analysis :SIA, Vol. 48, 8, 706-711, Wiley. - journal articleFatigue behavior of friction spot welds in lap shear specimens of AA5754 and Ti6Al4V alloysPlaine, A.H.,Suhuddin, U.F.H.,Alcantara, N.G.,dos Santos, J.F. (2016)
In: International Journal of Fatigue, Vol. 91, 149-157, Elsevier. - journal articleThe role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatingsFitseva, V.,Hanke, S.,dos Santos, J.F.,Stemmer, P.,Gleising, B. (2016)
In: Materials and Design, Vol. 110, 112-123, Elsevier. - journal articleFriction Stir Welding of Shipbuilding Steel with PrimerAzevedo, J.,Quintino, L.,Infante, V.,Miranda, R.M.,dos Santos, J.F. (2016)
In: Soldagem & Inspecao, Vol. 21, 1, 16-29, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleOn the feasibility of a friction-based staking joining method for polymer–metal hybrid structuresAbibe, A.B.,Sonego, M.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2016)
In: Materials and Design, Vol. 92, 632-642, Elsevier. - journal articleThe effect of yield surface curvature change by cross hardening on forming limit diagrams of sheetsSoyarslan, C.,Klusemann, B.,Bargmann, S. (2016)
In: International Journal of Mechanical Sciences, Vol. 117, 53-66, Elsevier. - journal articleFourth-order strain-gradient phase mixture model for nanocrystalline fcc materialsKlusemann, B.,Bargmann, S.,Estrin, Y. (2016)
In: Modelling and Simulation in Materials Science Engineering, Vol. 24, 8, 085016, IOP Publication, Bristol. - journal articlePerformance of friction stir welded tailor welded blanks in AA5059 and AA6082 alloys for marine applicationsFeistauer, E.,Bergmann, L.,dos Santos, J.F. (2016)
In: Key Engineering Materials, Aluminium Constructions: Sustainability, Durability and Structural Advantages, Vol. 710, 91-96, Trans Tech Publications, Aedermannsdorf. - journal articleGlobal and local mechanical properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloyWang, F.F.,Li, W.Y.,Shen, J.,Zhang, Z.H.,Li, J.L.,dos Santos, J.F. (2016)
In: Science and Technology of Welding and Joining, Vol. 21, 6, 479-483, Maney, London. - journal articleModeling of microstructural pattern formation in crystal plasticityKlusemann, B. (2016)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 16, 1, 361-362, Wiley. - journal articleMaterial-flow behavior during friction-stir welding of 6082-T6 aluminum alloyHuang, Y.,Wang, Y.,Wan, L.,Liu, H.,Shen, J.,dos Santos, J.F.,Zhou, L.,Feng, J. (2016)
In: The International Journal of Advanced Manufacturing Technology, Vol. 87, 1, 1115-1123, Springer, London. - journal articleImprovement of friction spot welding (FSpW) to join polyamide 6 and polyamide 66/carbon fibre laminateGoncalves, J.,dos Santos, J.F.,Canto, L.B.,Amancio Filho, S.T. (2016)
In: Welding International, Vol. 30, 4, 247-254, Taylor & Francis, London.
2015
- journal articleFriction Spot Welding of Similar AA5754 to AA5754 Aluminum Alloys and Dissimilar AA5754 Aluminum to AZ31 Magnesium AlloysSuhuddin, U.,Piccolo, D.,Fischer, V.,dos Santos, J.F. (2015)
In: Advanced Materials Research, Advanced Materials Research and Production, Vol. 1112, 485-488, Trans Tech Publications, Zuerich. - journal articleCrystallographic Texture in Bobbin Tool Friction-Stir-Welded AluminumShen, J.,Wang, F.,Suhuddin, U.F.H.,Hu, S.,Li, W.,dos Santos, J.F. (2015)
In: Metallurgical and Materials Transactions A, Vol. 46, 7, 2809-2813, TMS, Warrendale, PA. - journal articleCharacterization of the Microstructure Evolution in IF-Steel and AA6016 during Plane-Strain Tension and Simple ShearGerstein, G.,Klusemann, B.,Bargmann, S.,Schaper, M. (2015)
In: Materials, Vol. 8, 1, 285-301, MDPI Publishing, Basel. - journal articleInfluence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap jointsGoushegir, S.M.,dos Santos, J.F.,Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 83, 431-442, Elsevier. - journal articleInfluence of external cooling configuration on friction surfacing of AA6082 T6 over AA2024 T351Krohn, H.,Hanke, S.,Beyer, M.,dos Santos, J.F. (2015)
In: Manufacturing Letters, Vol. 5, 17-20, Elsevier, Amsterdam. - journal articleThe plastic yield and flow behavior in metallic glassesThamburaja, P.,Klusemann, B.,Adibi, S.,Bargmann, S. (2015)
In: Applied Physics Letters, Vol. 106, 5, 051903, AIP, Melville, NY. - journal articleMicrostructure and mechanical performance of metal-composite hybrid joints produced by FricRivetingAltmeyer, J.,Suhuddin, U.F.H.,dos Santos, J.F.,Amancio-Filho, S.T. (2015)
In: Composites / B, Vol. 81, 130-140, Elsevier. - journal articleEffect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al-Li alloyWang, F.F.,Li, W.Y.,Shen, J.J.,Hu, S.Y.,Li, J.L.,dos Santos, J.F.,Huber, N. (2015)
In: Materials and Design, Vol. 86, 933-940, Elsevier. - journal articleFriction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strengthEsteves, J.V.,Goushegir, S.M.,dos Santos, J.F.,Canto, L.B.,Hage, E.Jr.,Amancio-Filho, S.T. (2015)
In: Materials and Design, Vol. 66 B, 437-445, Elsevier. - journal articleFriction surfacing of Ti–6Al–4V: Process characteristics and deposition behaviour at various rotational speedsFitseva, V.,Krohn, H.,Hanke, S.,dos Santos, J.F. (2015)
In: Surface and Coatings Technology, Vol. 278, 56-63, Elsevier. - journal articleMicrostructure of AISI 410S Ferritic Stainless Steel and AISI 304L Austenitic Stainless Steel Dissimilar Weld Joined by FSW Process - Microestrutura de uma Solda Dissimilar entre o Aço Inoxidável Ferrítico AISI 410S e o Aço Inoxidável Austenítico AISI 304L Soldado pelo Processo FSWAndrade, T.C.,Silva, C.C.,Miranda, H.C.de,Motta, M.F.,Farias, J.P.,Bergman, L.A.,dos Santos, J.F. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 467-478, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleSliding wear behaviour of a Cr-base alloy after microstructure alterations induced by friction surfacingHanke, S.,Fischer, A.,dos Santos, J.F. (2015)
In: Wear, Vol. 338-339, 332-338, Elsevier, Amsterdam. - journal articleFriction spot welding of carbon fiber-reinforced polyamide 66 laminateGoncalves, J.,dos Santos, J.F.,Canto, L.B.,Amancio-Filho, S.T. (2015)
In: Materials Letters, Vol. 159, 509-509, Elsevier. - journal articleA directional modification of the Levkovitch–Svendsen cross-hardening model based on the stress deviatorSoyarslan, C.,Klusemann, B.,Bargmann, S. (2015)
In: Mechanics of Materials, Vol. 86, 21-30, Elsevier, Amsterdam. - journal articleThe optimization of friction spot welding process parameters in AA6181-T4 and Ti6Al4V dissimilar jointsPlaine, A.H.,Gonzalez, A.R.,Suhuddin, U.F.H.,dos Santos, J.F.,Alcantara, N.G. (2015)
In: Materials and Design, Vol. 83, 36-41, Elsevier. - journal articleFriction Riveting of Aluminum Alloy 6056 T6 and Polyamide 6: Role of the Rotation Speed on the Formation of the Anchoring Zone and Mechanical Performance - Rebitagem por Friccao (“FricRiveting”) de Liga de Alumínio 6056 T6 e Poliamida 6: Influencia da Velocidade de Rotacao na Formacao da Zona de Ancoragem e no Desempenho MecanicoProenca, B.C.,Blaga, L.,dos Santos, J.F.,Canto, L.B.,Amancio Filho, S.T. (2015)
In: Soldagem & Inspecao, Vol. 20, 4, 489-500, Associacao Brasileira de Soldagem, Rio de Janeiro.
2014
- journal articleIncreased Room Temperature Formability of Mg AZ31 by High Speed Friction Stir ProcessingHuetsch, L.L.,Huetsch, J.,Herzberg, K.,dos Santos, J.F.,Huber, N. (2014)
In: Materials and Design, Vol. 54, 980-988, Elsevier. - journal articleMicrostructure and mechanical properties of friction spot welds of dissimilar AA5754 Al and AZ31 Mg alloysSuhuddin, U.,Fischer, V.,Kroeff, F.,dos Santos, J.F. (2014)
In: Materials Science and Engineering A, Vol. 590, 384-389, Elsevier. - journal articleComputational modelling of submicron-sized metallic glassesBargmann, S.,Xiao, T.,Klusemann, B. (2014)
In: Philosophical Magazine, Vol. 94, 1, 1-19, Taylor & Francis, Abingdon. - journal articleFriction surfacing - A reviewGandra, J.,Krohn, H.,Miranda, R.M.,Vilaca, P.,Quintino, L.,dos Santos, J.F. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 5, 1062-1093, Elsevier. - journal articleEffect of the friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone jointsAltmeyer, J.,dos Santos, J.F.,Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 60, 164-176, Elsevier. - journal articleMechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applicationsFeistauer, E.E.,Bergmann, L.A.,Barreto, L.S.,dos Santos, J.F. (2014)
In: Materials and Design, 323-332, Elsevier. - journal articleEutectic structures in friction spot welding joint of aluminum alloy to copperShen, J.,Suhuddin, U.F.H.,Barbosa, M.E.B.,dos Santos, J.F. (2014)
In: Applied Physics Letters, Vol. 104, 19, 191901, AIP, Melville, NY. - journal articleMaterials by design: An experimental and computational investigation on the microanatomy arrangement of porous metallic glassesSarac, B.,Klusemann, B.,Xiao, T.,Bargmann, S. (2014)
In: Acta Materialia, Vol. 77, 411-422, Elsevier. - journal articleFricRiveting of aluminum 2024-T351 and polycarbonate: Temperature evolution, microstructure and mechanical performanceRodrigues, C.F.,Blaga, L.A.,dos Santos, J.F.,Canto, L.B.,Hage, E. Jr.,Amancio-Filho, S.T. (2014)
In: Journal of Materials Processing Technology, Vol. 214, 10, 2029-2039, Elsevier. - journal articleHybrid Friction Diffusion Bonding of Aluminium Tube-to-Tube-Sheet Connections in Coil-Wound Heat ExchangersDethlefs, A.,Roos, A.,dos Santos, J.F.,Wimmer, G. (2014)
In: Materials and Design, Vol. 60, 7-12, Elsevier. - journal articleEffects of tool rotational and welding speed on microstructure and mechanical properties of bobbin-tool friction-stir welded Mg AZ31Li, W.Y.,Fu, T.,Huetsch, L.,Hilgert, J.,Wang, F.F.,dos Santos, J.F.,Huber, N. (2014)
In: Materials and Design, Vol. 64, 714-720, Elsevier. - journal articleNon-local modeling of size effects in amorphous metalsKlusemann, B.,Xiao, T.,Bargmann, S. (2014)
In: PAMM: Proceedings in Applied Mathematics and Mechanics, Vol. 14, 1, 529-530, Wiley. - journal articleFriction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRPJunior, W.S.,Emmler, T.,Abetz, C.,Handge, U.A.,dos Santos, J.F.,Amancio-Filho, S.T.,Abetz, V. (2014)
In: Polymer, Vol. 55, 20, 5146-5159, Elsevier. - journal articleMicrostructure and interface characterization of dissimilar friction stir welded lap joints between Ti–6Al–4V and AISI 304Campo, K.N.,Campanelli, L.C.,Bergmann, L.,dos Santos, J.F.,Bolfarini, C. (2014)
In: Materials and Design, Vol. 56, 139-145, Elsevier. - journal articleFriction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: Microstructure and mechanical performanceGoushegir, S.M.,dos Santos, J.F.,Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 54, 196-206, Elsevier. - journal articleA computational study of a model of single-crystal strain-gradient viscoplasticity with an interactive hardening relationBargmann, S.,Reddy, B.D.,Klusemann, B. (2014)
In: International Journal of Solids and Structures, Vol. 51, 15-16, 2754-2764, Elsevier. - journal articleInherent and induced anisotropic finite visco-plasticity with applications to the forming of DC06 sheetsBehrouzi, A.,Soyarslan, C.,Klusemann, B.,Bargmann, S. (2014)
In: International Journal of Mechanical Sciences, Vol. 89, 101-111, Elsevier. - journal articleImprovement of the Friction Spot Welding (FSpW) to join Polyamide 6 and Polyamide 66/Carbon Fiber Laminate - Aperfeicoamento da Tecnica de Soldagem Pontual por Friccao (FSpW) para Uniao de Poliamida 6 e Laminado de Poliamida 66 com Fibra de CarbonoGoncalves, J.,dos Santos, J.F.,Canto, L.B.,Amancio Filho, S.T. (2014)
In: Soldagem & Inspecao, Vol. 19, 1, 19-27, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleFeasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocompositeJunior, W.S.,Handge, U.A.,dos Santos, J.F.,Abetz, V.,Amancio-Filho, S.T. (2014)
In: Materials and Design, Vol. 64, 246-250, Elsevier.
2013
- journal articleMetallurgy and Mechanical Performance of AZ31 Magnesium Alloy Friction Spot WeldsCampanelli, L.C.,Suhuddin, U.F.H.,Antonialli, A.I.S.,dos Santos, J.F.,Alcantara, N.G.,Bolfarini, C. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 4, 515-521, Elsevier. - journal articleNumerical investigation of the tool contact condition during friction stir welding of aerospace aluminium alloyWang, H.,Colegrove, P.A.,dos Santos, J.F. (2013)
In: Computational Materials Science, Vol. 71, 101-108, Elsevier. - journal articleMechanical and failure behaviour of hybrid polymer–metal staked jointsAbibe, A.B.,Amancio-Filho, S.T.,dos Santos, J.F.,Hage, E.jr. (2013)
In: Materials and Design, Vol. 46, 338-347, Elsevier. - journal articleAsymmetric mechanical properties and tensile behaviour prediction of aluminium alloy 5083 friction stir welding jointsRao, D.,Huber, K.,Heerens, J.,dos Santos, J.F.,Huber, N. (2013)
In: Materials Science and Engineering A, Vol. 565, 44-50, Elsevier. - journal articleAnalysis and comparison of two finite element algorithms for dislocation density based crystal plasticityKlusemann, B.,Svendsen, B.,Bargmann, S. (2013)
In: GAMM-Mitteilungen, Vol. 36, 2, 219-238, Wiley, Weinheim. - journal articleModeling and simulation of size effects in metallic glasses with a non-local continuum mechanics theoryKlusemann, B.,Bargmann, S. (2013)
In: Journal of the Mechanical Behavior of Materials, Vol. 22, 1-2, 51-66, de Gruyter, Berlin, Boston. - journal articleFormation of Intermetallic Compounds in Dissimilar Friction Spot Weld of Al to Mg AlloysSuhuddin, U.,Fischer, V.,dos Santos, J.F. (2013)
In: Materials Science Forum, Light Metals Technology Conference, LMT 2013, Vol. 765, 731-735, Trans Tech Publications, Aedermannsdorf. - journal articleHybrid modelling of 7449-T7 aluminium alloy friction stir welded jointsWang, H.,Colegrove, P.A.,dos Santos, J.F. (2013)
In: Science and Technology of Welding and Joining, Vol. 18, 2, 147-153, Maney, London. - journal articleCavitation erosion of Cr60Ni40 coatings generated by friction surfacingHanke, S.,Beyer, M.,Silvonen, A.,dos Santos, J.F.,Fischer, A. (2013)
In: Wear, Vol. 301, 1-2, 415-423, Elsevier, Amsterdam. - journal articleFriction riveting (FricRiveting) – An innovative technology for joining hybrid polymer-metal and composite-metal structures / Nituirea prin frecare (FricRiveting) – O tehnologie inovativă pentru îmbinarea structurilor hibride polimer-metal și compozit-metalAmancio-Filho, S.T.,Blaga, L.,dos Santos, J.F.,Bancila, R. (2013)
In: Sudura : Romanian Welding Society´s Review, Vol. 23, 1, 14-16, ASR. - journal articleFriction Riveting of glass-fibre-reinforced polyetherimide composite and titanium grade 2 hybrid jointsBlaga, L.,Bancila, R.,dos Santos, J.F.,Amancio-Filho, S.T. (2013)
In: Materials and Design, Vol. 50, 825-829, Elsevier. - journal articleFriction stir welding of structural steel S235 and S355Szabo, R.,Bergmann, L.,dos Santos, J.F. (2013)
In: Welding and Material Testing, Vol. 22, 4, 3-7, National R & D Institute for Welding and Material Testing, Timisoara, Romania. - journal articleLap Shear Test of a Magnesium Friction Spot Joint: Numeric ModelingCampanelli, L.C.,Antonialli, A.I.S.,de.Alcantara, N.G.,Bolfarini, C.,Suhuddin, U.F.H.,dos Santos, J.F. (2013)
In: Tecnologia em Metalurgia, Materiais e Mineracao, Vol. 10, 2, 97-102, Associacao Brasileira de Metalurgia, Sao Paulo. - journal articleThe influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium weldsTier, M.D,Rosendo, T.S,dos Santos, J.F.,Huber, N.,Mazzaferro, J.A.,Mazzaferro, C.P.,Strohaecker, T.R. (2013)
In: Journal of Materials Processing Technology, Vol. 213, 6, 997-1005, Elsevier. - journal articleMethodology for prediction of distortion of workpieces manufactured by high speed machining based on an accurate through-the-thickness residual stress determinationRichter-Trummer, V.,Koch, D.,Witte, A.,dos Santos, J.F.,de Castro, P.M.S.T. (2013)
In: The International Journal of Advanced Manufacturing Technology, Vol. 68, 9-12, 2271-2281, Springer, London. - journal articleFriction stir welding development of aluminium alloys for structural connectionsGabor, R.,dos Santos, J.F. (2013)
In: Proceedings of the Romanian Academy : Series A, Vol. 14, 1, 64-71, Academiei Romane, Bucuresti. - journal articleThe thermal cycle during the dissimilar friction spot welding of aluminum and magnesium alloySuhuddin, U.F.H.,Fischer, V.,dos Santos, J.F. (2013)
In: Scripta Materialia, Vol. 68, 1, 87-90, Elsevier.
2012
- journal articleTemperature and Texture Development during High Speed Friction Stir Processing of Magnesium AZ31Huetsch, L.L.,Hilgert, J.,Herzberg, K.,dos Santos, J.,Huber, N. (2012)
In: Advanced Engineering Materials, Vol. 14, 9, 762-771, Wiley, Weinheim. - journal articleFeasibility study of the Friction Spot Welding (FSpW) process in thermoplastics - Estudo de viabilidade da soldagem de termoplásticos por "Friction Spot Welding" (FSpW)de Oliveira, P.H.F.,Amancio Filho, S.T,dos Santos, J.F.,Hage, E.jr. (2012)
In: Soldagem & Inspecao, Vol. 17, 2, 96-103, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleFriction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructureCoelho, R.S.,Kostka, A.,dos Santos, J.F.,Kaysser-Pyzalla, A. (2012)
In: Materials Science and Engineering A, Vol. 556, 175-183, Elsevier. - journal articleInfluence of the FSW clamping force on the final distortion and residual stress fieldRichter-Trummer, V.,Suzano, E.,Beltrao, M.,Roos, A.,dos Santos, J.F.,de Castro, P.M.S.T. (2012)
In: Materials Science and Engineering A, Vol. 538, 81-88, Elsevier. - journal articleMicrostructural Evolution During Friction Surfacing of Dissimilar Aluminum AlloysSuhuddin, U.,Mironow, S.,Krohn, H.,Beyer, M.,dos Santos, J.F. (2012)
In: Metallurgical and Materials Transactions A, Vol. 43, 13, 5224-5231, TMS, Warrendale, PA. - journal articleParameters optimization for friction spot welding of AZ31 magnesium alloy by Taguchi method - Otimizacao dos parametros de soldagem por friccao por ponto da liga de magnesio AZ31 pelo metodo de TaguchiCampanelli, L.C.,Suhuddin, U.F.H.,dos Santos, J.F.Alcantara, N.G. (2012)
In: Soldagem & Inspecao, Vol. 17, 1, 26-31, Associacao Brasileira de Soldagem, Rio de Janeiro. - journal articleShear layer modelling for bobbin tool friction stir weldingHilgert, J.,dos Santos, J.F.,Huber, N. (2012)
In: Science and Technology of Welding and Joining, Vol. 17, 6, 454-459, Maney, London. - journal articlePreliminary Investigation on Friction Spot Welding of AZ31 Magnesium AlloyCampanelli, L.C.,Suhuddin, U.F.H.,dos Santos, J.F.,Alcantara, N.G. (2012)
In: Materials Science Forum, THERMEC 2011, Vol. 706-709, 3016-3021, Trans Tech Publications, Aedermannsdorf. - journal articleDevelopment of computational models to predict the mechanical behavior of Friction Riveting jointsBorges, M.F.,Amancio-Filho, S.T.,dos Santos, J.F.,Strohaecker, T.R.,Mezzaferro, J.A.E. (2012)
In: Computational Materials Science, Vol. 54, 7-15, Elsevier.